Description
Yokogawa YHC5150X-01 FieldMate HART Handheld Communicator
Product Core Introduction
YHC5150X-01 is Yokogawa’s latest intrinsically safe professional-grade HART handheld communicator, belonging to the FieldMate series ecosystem. Built on Windows Embedded CE platform, it delivers full native DD (Device Description) support without format translation, enabling seamless configuration, calibration, real-time polling and predictive maintenance for all HART 5/6/7 compliant field instruments. As a critical on-site maintenance bridge connecting smart transmitters, valve positioners and Yokogawa PRM (Plant Resource Manager) asset management system, it eliminates the dependency on DCS operation stations for local instrument diagnosis, drastically cutting commissioning and fault resolution time in process industries.

YHC5150X-01
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Yokogawa Electric Corporation |
| Full Model Designation | YHC5150X-01 |
| Supported Protocols | HART 5, HART 6, HART 7 (point-to-point and multi-drop modes) |
| Microprocessor | 1 GHz high-performance CPU |
| Memory Configuration | 256 MB RAM, 512 MB internal Flash, expandable up to 64 GB via SD card (4 GB pre-installed) |
| Display Unit | 4.3-inch 1/4 VGA (480×272 pixels) transflective anti-glare color touchscreen, no stylus required |
| Keypad Layout | 52 keys with tactile feedback, including full QWERTY keyboard, numeric keypad and 4-direction cursor control |
| Power System | Rechargeable lithium-ion battery; 20 hours typical continuous operation, 200 hours standby |
| Physical Dimensions | 303 × 142 × 48 mm (11.9 × 5.6 × 1.9 inch) |
| Net Weight | 0.91 kg (2.1 lbs) including battery |
| Explosion Protection Certification | Class I Division 1 (cULus); II 1G Ex ia IIC T4 Ga (ATEX/IECEx) |
| Environmental Rating | IP54 dust and splash water resistant |
| Operating Temperature Range | -10°C to +50°C |
| Data Interfaces | USB 2.0 port for firmware upgrade, DD file import and maintenance report export |
| Device Compatibility | Supports over 5,000 HART instruments from Yokogawa, Emerson, Siemens, ABB, Endress+Hauser and other mainstream brands |
| Standard Warranty | 12 months from delivery |
6 Recommended Compatible Models in the Same Series
- YHC5150X-02: Enhanced version with built-in Bluetooth, supporting wireless HART communication and direct data sync with Yokogawa FieldMate R3 software
- YHC5150X-IS: Extended intrinsically safe variant with Zone 0 hazardous area certification, for ultra-strict petrochemical offshore platform applications
- YHC4150X: Entry-level HART communicator with 3.5-inch LCD, optimized for basic parameter configuration and loop testing tasks
- YHC5150X-PRO: Premium kit bundled with Yokogawa A1576EA original HART communication cables, 250Ω precision resistors and rugged hard carrying case
- YHC5150X-FF: Hybrid dual-protocol model adding FOUNDATION Fieldbus communication capability, for mixed HART+FF plant maintenance scenarios
- YHC1500X: Next-generation Android-based smart communicator with 5-inch touchscreen, supporting cloud-based maintenance report upload and team collaborative work order management
Professional Quality Control Test Standard Operating Procedure
- Visual & Mechanical Pre-Inspection
Verify enclosure integrity, keypad tactile feedback consistency, screen pixel health and port connector condition; confirm no physical damage, scratch or loose component on the unit and all original accessories. - Battery Cycle & Power Performance Test
Execute 10 consecutive full charge-discharge cycles, record full capacity runtime; confirm low-battery warning triggers at 10% remaining capacity and auto-power-off function activates correctly after 5 minutes of idle inactivity. - HART Communication Compatibility Bench Test
Connect the unit to Yokogawa EJA110E pressure transmitter, Emerson 3051S transmitter and Endress+Hauser Proline t-mass 65I flowmeter sequentially; verify full DD file loading, PV real-time reading, parameter modification and sensor trim operations complete without communication dropout. - Environmental Stress Validation
Place unit in temperature-humidity chamber, run 24-hour continuous operation test at 50°C / 90% RH, then perform 4-hour low-temperature storage at -10°C; confirm all functions remain fully operational after returning to room temperature. - Intrinsically Safe Electrical Safety Test
Conduct over-voltage protection, short-circuit current limiting and insulation resistance test strictly per IECEx ia IIC T4 standard; ensure no unsafe energy output that could ignite explosive gas atmosphere under any fault condition. - Final Calibration & Data Integrity Audit
Run full system self-diagnostic, verify all exported maintenance reports retain complete timestamp and signature traceability; write unique serial number into firmware, attach qualified certification label and release for delivery.
New Module Installation & Startup Guideline
- Unpack the unit, confirm all standard accessories (lithium-ion battery pack, HART communication cable, multi-region AC charger, quick start manual) are included and undamaged.
- Align the battery pack with rear compartment slot, slide it into place until the locking latch clicks; connect the AC charger and perform initial 3-hour full charge before first field deployment.
- Power on the communicator, complete on-screen language selection, date/time configuration and touchscreen calibration wizard; confirm system firmware version is V2.10 or above to support latest DD file format.
- Connect the unit to target HART instrument via Yokogawa original A1576EA communication cable, ensure the 250Ω loop resistor is correctly installed in the circuit; tap “Device Scan” on main menu to establish automatic HART communication.
- Run built-in connection diagnostic tool, verify tag number, device model and current process variable are correctly displayed; perform one quick write-protection test to confirm parameter modification authority matches site safety requirement.
Application Scenarios & Distinctive Features
- Greenfield Plant Instrument Commissioning: Dramatically accelerates loop check for hundreds of pressure/temperature transmitters, enabling one-touch tag assignment, range configuration and damping parameter adjustment in new chemical or power plant projects.
- Turnaround & Shutdown Maintenance: Serves as standard troubleshooting tool during refinery overhaul, extracting historical fault logs, performing zero calibration and verifying valve positioner stroke performance for legacy instruments over 10 years in service.
- Regulated Industry Calibration Compliance: Generates ISO 17025 compliant timestamped electronic calibration reports for pharmaceutical and food manufacturing sites, fully meeting regulatory audit traceability requirements.
- Off-line DCS Bypass Diagnosis: When DCS operation station loses access to field instruments, maintenance engineers can perform local isolation test directly on site, rapidly distinguish instrument hardware fault from communication line failure without waiting for control room support.
- Core Advantages: Native DD format support without translation, 20-hour ultra-long field runtime, sunlight-readable transflective display, no mandatory annual software subscription, full backward compatibility with all legacy Yokogawa HART communicator operation logic.

YHC5150X-01
Frequently Asked Questions
- Q: The communicator cannot establish HART connection with field instrument?
A: Confirm the loop has minimum 250Ω HART resistor installed, verify instrument loop voltage is between 12-24VDC; replace with original Yokogawa A1576EA cable to eliminate unstable contact caused by third-party wiring. - Q: Newly released HART instrument cannot be recognized by the device?
A: Connect the unit to PC via USB port, run Yokogawa FieldMate R3 software to download and install the latest corresponding DD file; upgrade system firmware to V2.15 or higher for full HART 7 revision support. - Q: The touchscreen becomes unresponsive under low temperature winter outdoor condition?
A: This is normal temporary characteristic for transflective display; warm the unit above 0°C for 5 minutes, then re-run touchscreen calibration in system setting menu to restore full sensitivity. - Q: Can I export all maintenance data directly to existing Yokogawa PRM asset management system?
A: Yes, all device configuration records, trim logs and fault diagnosis reports can be exported in standard FDT/DTM format, which is fully compatible with Yokogawa PRM V3 and above versions without format conversion. - Q: What is the difference between YHC5150X-01 and older YHC5150 generation?
A: YHC5150X-01 upgrades to 1GHz processor, 4.3-inch anti-glare color touchscreen, doubles battery capacity and adds USB 2.0 high-speed data transfer; all operation menus are 100% backward compatible, no retraining required for existing YHC5150 users.
