Description
Lam Research 810‑072903‑004 LonWorks PIO I/O PCB Board, 50020R‑10 Process Input / Output Card for Semiconductor Etch Equipment

810-072903-004
Technical Specifications
- Revision: Common Rev H
- Form Factor: VME slot mount card, single‑width PCB with front panel
- Communication: LonWorks fieldbus interface; dual D‑Sub connectors on front bezel
- Backplane: VME bus compatible, dedicated Lam process chassis
- I/O Function: Isolated digital process I/O for valve, sensor, interlock and actuator control
- Onboard IC: Dual main processing ASICs, isolated driving array, ESD protection circuits
- Weight: 0.35 kg
- PCB Base PN: 714‑078606‑003
- Operating Temp: 18 °C ~ 28 °C (fab controlled environment)
- Storage Temp: −10 °C ~ +60 °C, low humidity, static‑controlled storage
- Humidity: 30%–70 %, non‑condensing
- Environment: Cleanroom use only; strict ESD requirement
- Status: Original OEM obsolete; supplied as tested refurbished / used spare; new original stock scarce
- Note: Not a general‑purpose industrial I/O; firmware locked for Lam etch process control
Application Scenarios
- Lam Research dielectric / conductor etch platforms
- Dry etch, RIE and DRIE wafer processing chambers
- Chamber gas valve sequencing and pressure interlock control
- Plasma status sensing and endpoint auxiliary I/O
- Wafer transfer, lift pin and chuck actuator interlocks
- Fab critical safety interlock loops for semiconductor process tools
- Spare replacement for existing installed 50020R‑10 control racks
Installation and Maintenance
- Installation: Strict ESD protection mandatory; power down chassis before insertion; align VME guides and seat firmly onto backplane; secure front panel latches; verify LonWorks network termination; match firmware revision with tool host software; install only inside Lam controlled process cabinet
- Maintenance: Periodic visual inspection for corrosion, pin oxidation and solder joint cracks; check D‑Sub connector retention and cable shielding; functional test via Lam tool diagnostic menu; no field component repair; faulty boards must be sent to qualified semiconductor refurbisher; store spare in static‑shield bag inside humidity‑controlled cabinet; avoid shock and vibration during handling; re‑calibration required after repair
Related Models
- 810‑072903‑001 / 810‑072903‑002 / 810‑072903‑003: Earlier revisions of this PIO card
- 810‑066590‑004: Lam auxiliary process control board
- 810‑A16449‑00: Lam main power supply board for same chassis family
- 810‑115965: LonWorks communication daughterboard
- 810‑143453: Alternative digital I/O card for newer Lam etch tools
- 853‑069440‑201: Matching system controller assembly
- 50020R‑10: Rack assembly reference for this PIO series


