Yokogawa SPW481-53 Safety Power Supply Module for ProSafe-RS SCS & CENTUM CS3000 / VP FCS

  1. Yokogawa SPW481-54 Safety Power Supply
  2. Yokogawa SPW482-53 Safety Power Supply
  3. Yokogawa SPW484-53 Safety Power Supply
  4. Yokogawa SSC50S Safety CPU Module
  5. Yokogawa SSC50D Safety CPU Module
  6. Yokogawa SAI533 Safety Analog Input
  7. Yokogawa SDI531 Safety Digital Input
  8. Yokogawa SDO531 Safety Digital Output
  9. Yokogawa SDV531 Safety Digital Output
  10. Yokogawa SSB401 ESB Bus Interface Module
  11. Yokogawa SNT10D Node Interface
  12. Yokogawa SNB10D Bus Coupler
  13. Yokogawa PW481-50 DCS Power Supply
  14. Yokogawa ProSafe‑RS Backplane
  15. Yokogawa SPW481-51 Safety Power Supply
  16. Yokogawa SIS system configuration tool
Category: SKU: Yokogawa SPW481-53 Brand:

Description

Yokogawa SPW481-53 Safety Power Supply Module for ProSafe-RS SCS & CENTUM CS3000 / VP FCS

 

Model & Part Number

  • Type: SPW481-53
  • Manufacturer: Yokogawa (Japan)
  • Product Category: Safety-rated rack power supply module
  • Compatible System: Yokogawa ProSafe‑RS Safety Control Station (SCS), CENTUM CS3000, CENTUM VP Field Control Station (FCS)
  • Note: SPW series = safety power, different from standard PW481 series DCS power supply

SPW481-53

Product Description

The SPW481-53 is a safety-certified rack power supply module designed for Yokogawa ProSafe-RS safety instrumented systems and CENTUM FCS racks. It converts 100–120 VAC input into stabilized multi-rail DC power to feed safety CPU, safety I/O, ESB bus interface and communication modules on the backplane. It supports hot swap and dual redundant configuration for bumpless backup, which is mandatory for SIL-rated safety loops. Integrated fault monitoring, overvoltage, overcurrent and thermal protection circuits continuously report health status to the SCS diagnostic system. This module is end-of-life legacy safety hardware, widely stocked by refineries, chemical plants and power plants for spare replacement and life extension of ProSafe‑RS safety systems.

 

Technical Specifications

Item Specification
Input Voltage 100–120 VAC, ±10%, 50/60 Hz
Max Rated Power 200 VA
Safety Compliance SIL 2 capable within approved ProSafe‑RS architecture
Redundancy Dual SPW481-53 hot redundant operation supported
Hot Swap Supported in redundant configuration
Diagnostic Power OK LED, fault alarm LED, internal protection
Operating Temperature 0°C ~ +50°C
Storage Temperature -20°C ~ +70°C
Relative Humidity 5% ~ 85%, non-condensing
Protection Class IP20 (cabinet rack mounting)
Weight Approx. 0.8 kg
Compliance CE, IEC 61508 aligned

 

Application Fields

  • Oil refinery and natural gas process safety interlock systems
  • Petrochemical and chemical SIS / ESD emergency shutdown systems
  • Thermal power and combined cycle safety protection
  • Offshore platform safety control systems
  • LNG terminal safety instrumented systems
  • Pulp & paper and pharmaceutical safety interlock
  • Boiler, furnace and compressor safety trip protection
  • Legacy ProSafe‑RS & CENTUM VP safety rack overhaul and spare replacement

 

Brand Profile (Yokogawa ProSafe-RS)

Yokogawa ProSafe‑RS is a well-known SIL-certified safety control platform tightly integrated with CENTUM DCS. The SPW481 series is the dedicated safety power family for SCS racks, separate from the ordinary PW481 DCS power supplies. ProSafe‑RS is widely deployed for ESD, F&G, burner management and turbomachinery safety protection. Yokogawa has discontinued SPW481-53, and newer safety racks use SPW482 / SPW484 power modules, while a large installed safety base still depends on -53 spares to maintain SIL safety coverage.

 

Related News & Industry Events

is officially discontinued by Yokogawa. Original factory new stock is limited. Safety power supplies are critical SIS spares; failure can lead to loss of safety interlock function. Asset owners keeed 481-53 units and perform redundant transfer tests during plant turnaround. Tested surplus aurb481-53 are high-demand aftermarket safety spares for sites running ProSafe‑RS.

 

Usage Scenarios

  1. Main safety power source for ProSafe‑RS SCS rack backplane
  2. Redundant backup power for SIL2-rated ESD and F&G safety racks
  3. Direct replacement for failed series safety power module
  4. Safety rack expansion when adding SCS CPU and safety I/O modules
  5. Troubleshooting power-related SCS rack reset and communication faults
  6. Retrofit upgrade for aging ProSafe‑RS safety control nodes
  7. Satisfy IEC61508 safety power redundancy requirements
  8. Emergency spare inventory for process safety shutdown systems

 

Functional Advantages

  • Safety design for ProSafe‑RS, SIL 2 capable in certified architecture
  • 100–120 VAC input version matching many plant island power systems
  • Hot-swappable design, replacement without safety rack shutdown in redundant setup
  • Complete protection: overcurrent, overvoltage, over-temperature
  • Front LED status for fast on-site troubleshooting
  • Low ripple DC output for stable safety CPU and safety I/O operation
  • Same rack form factor as SPW482 / SPW484 family
  • Proven high MTBF for 24/7 safety service
  • Tight integration with ProSafe‑RS diagnostic software for fault logging

 

Recommended Related Products (16 pcs)

  1. Yokogawa -54 Safety Power Supply
  2. Yokogawa SPW482-53 Safety Power Supply
  3. Yokogawa SPW484-53 Safety Power Supply
  4. Yokogawa SSC50S Safety CPU Module
  5. Yokogawa SSC50D Safety CPU Module
  6. Yokogawa SAI533 Safety Analog Input
  7. Yokogawa SDI531 Safety Digital Input
  8. Yokogawa SDO531 Safety Digital Output
  9. Yokogawa SDV531 Safety Digital Output
  10. Yokogawa SSB401 ESB Bus Interface Module
  11. Yokogawa SNT10D Node Interface
  12. Yokogawa SNB10D Bus Coupler
  13. Yokogawa PW481-50 DCS Power Supply
  14. Yokogawa ProSafe‑RS Backplane
  15. Yokogawa -51 Safety Power Supply
  16. Yokogawa SIS system configuration tool

 

Installation Instruction

  1. Confirm single or redundant safety power configuration before installation.
  2. Verify AC input rating is 100–120 VAC matching module label.
  3. Non-redundant setup: cut off rack input power before inserting the module.
  4. Redundant setup: rack can remain energizedrt and fasten front screw.
  5. Connect AC input wiring to terminal block, torque terminals properly.
  6. Apply AC power and confirm Power OK LED is steady ON.
  7. Check SCS CPU and safety I/O modules boot healthy with no SIS alarms.
  8. For dual redundant configuration, perform power transfer test to verify bumpless switchover.
  9. Confirm safety system diagnostic view shows power channel normal.
  10. Label power source and safety revision clearly for safety audit records.
  11. Monitor backplane bus voltage via SCS diagnostic software.
  12. Close cabinet door to reduce dust ingress and EMI interference.

 

Maintenance Guide

  • Daily Check: Inspect LED status, module temperature, wiring tightness and no abnormal odor.
  • Periodic Maintenance: Clean ventilation grille with dry anti-static brush; no liquid cleaner.
  • Routine Test: Execute redundant power switchover test during shutdown; record readings for safety audit.
  • Troubleshooting: Fault LED triggered — check input AC quality, fuse and wiring. Intermittent SCS reset — inspect backplane contacts and load balance.
  • Spare Handling: Store in anti-static bag, cool dry low-vibration storage.
  • Repair Notice: Do not disassemble internal power circuit on site. Return faulty unit to qualified Yokogawa safety service vendor for testing.
  • Lifecyce: is obsolete safety hardware. Evaluate migration to SPW482/SPW484 while maintaining spare inventory to keep SIS safety function.