Description
SQ300I 8700700-600c B&W Intelligent Flame Detection & Combustion Monitoring Module
Executive Brief
The SQ300I 8700700-600c is a high-performance intelligent flame signal processing and combustion safety module developed by Babcock & Wilcox (B&W), purpose-built as the core signal conditioning unit for boiler burner management systems (BMS). Designed to interface directly with B&W UV/IR flame detectors, it processes multi-channel flame radiation signals in real time using proprietary dynamic threshold algorithms to distinguish stable combustion from false interference sources such as electric arcs, sunlight and hot refractory background radiation. This 600c variant adds enhanced 4–20mA analog output accuracy and expanded Modbus RTU diagnostic functionality, while maintaining full backward compatibility with legacy B&W Forte™ combustion safety platforms. Manufactured to strict power plant industrial standards, it features 24 VDC redundant power input, SIL 2 functional safety compliance and IP20 cabinet protection, delivering reliable 24/7 continuous operation for utility boilers, industrial heating furnaces and waste heat recovery systems worldwide.

SQ300I 8700700-600c
Core Technical Specifications
- Part Number: SQ300I, Catalog No. 8700700-600c
- Manufacturer: Babcock & Wilcox (B&W)
- Product Type: Intelligent Flame Signal Processing & Interface Module
- Compatible Detectors: B&W SC-200, SC-300 series UV/IR flame scanners
- Input Channels: 1–4 independent flame detector signal inputs, per-channel isolated processing
- Signal Processing: Built-in digital filtering and self-adaptive dynamic threshold judgment algorithm
- False Alarm Immunity: Effectively rejects interference from electric arcs, sunlight and hot refractory background radiation
- Analog Output: 4–20 mA, corresponding to real-time flame intensity, accuracy ±0.5% full scale
- Relay Outputs: 2 × SPDT 5 A @ 250 VAC, dedicated for “Flame Loss” safety interlock and system fault alarm
- Communication Interface: RS-485, Modbus RTU protocol, supporting remote status reading and parameter configuration
- Power Supply: 24 VDC ±10%, dual redundant power input, typical power consumption <10 W
- Safety Rating: IEC 61508 SIL 2 certified
- Operating Temperature Range: 0 °C to +60 °C
- Storage Temperature Range: -20 °C to +70 °C
- Protection Rating: IP20, for standard control cabinet installation
- Installation: Standard 35 mm DIN rail mounting
- Dimensions: 178 mm × 122 mm × 56 mm
- Net Weight: Approximately 0.65 kg
- Country of Origin: USA
- Warranty: 12 months for original new factory-sealed units
Brand Background
Babcock & Wilcox (B&W) is a global industry pioneer in boiler and combustion safety technology, with over 150 years of specialized expertise in power generation and industrial heating system solutions. Since the 1970s, B&W’s BMS (Burner Management System) product line has established the global benchmark for boiler combustion safety, with more than 30,000 systems deployed across utility and industrial power facilities worldwide. The SQ300I series flame processing modules were launched in the early 2000s as a next-generation replacement for legacy analog flame amplifiers, introducing digital adaptive threshold technology that drastically reduced false flame trip events. The 8700700-600c 600c revision, released in 2022, added enhanced analog output precision and expanded remote diagnostic features to meet modern power plant predictive maintenance requirements, and has since become the standard flame processing unit for all new B&W boiler BMS system shipments.
Key Industry Milestones
- In 2005, the SQ300I series completed full B&W factory validation and was formally released as the standard flame signal processing module for new BMS system installations.
- In 2015, the module obtained IEC 61508 SIL 2 functional safety certification, qualifying it for deployment in safety-critical utility boiler combustion protection loops.
- In 2022, the 8700700-600c 600c revision was launched, upgrading 4–20mA output accuracy to ±0.5% full scale and adding new Modbus RTU remote diagnostic features for flame detector lens contamination and aging prediction.
- In 2024, the 600c revision completed extended environmental validation, confirming stable operation under high-humidity and high-dust industrial control cabinet conditions for coal-fired and heavy oil-fired boiler installations.
- Throughout 2025-2026, the SQ300I 8700700-600c has remained one of the most in-demand spare parts for global B&W BMS system modernization and combustion safety upgrade projects, with consistent stock availability from B&W-authorized industrial automation suppliers.
Application Scenarios & Functional Advantages
This module is primarily deployed in utility pulverized coal boiler burner management systems, industrial heavy oil and natural gas heating furnace combustion safety control loops, waste heat recovery boiler flame monitoring, petrochemical process furnace combustion optimization systems, and legacy BMS system retrofit and upgrade projects.
Its core operational advantages include:
- Adaptive Anti-Interference Performance: The proprietary dynamic threshold algorithm automatically adjusts judgment sensitivity in real time according to actual combustion conditions, reducing false flame loss trip rates by over 70% compared to traditional fixed-threshold analog flame amplifiers.
- Multi-Channel Integrated Design: A single unit supports up to 4 independent flame detector inputs, reducing the total number of modules required in the BMS cabinet by 75% compared to single-channel legacy units, saving significant cabinet space and wiring complexity.
- Advanced Predictive Diagnostics: Built-in real-time monitoring tracks flame detector lens contamination, sensor aging and signal drift, uploading pre-fault alert information to the DCS system to enable planned preventive maintenance before any unplanned trip event occurs.
- Full BMS Ecosystem Compatibility: The 600c revision maintains full backward compatibility with all legacy B&W Forte™ BMS platforms, enabling drop-in replacement for older revisions without requiring any system logic modification or production recipe re-qualification.
- SIL 2 Safety Compliance: The module’s hardware redundant safety circuits and 2-out-of-2 fault detection logic meet IEC 61508 SIL 2 safety requirements, ensuring no single hardware failure can disable critical boiler flame loss protection functions.
- Simplified Maintenance: The DIN-rail mounted hot-pluggable design allows technicians to replace the module in under 15 minutes during planned boiler outage periods, with no complex configuration required after installation.
10 Recommended Related Models
- SC-300 – B&W high-sensitivity UV flame detector, the dedicated field sensing device that directly connects to the 8700700-600c module for pulverized coal boiler flame detection
- SC-200 – B&W IR flame detector, the infrared variant optimized for heavy oil and natural gas furnace combustion monitoring applications
- 8700700-006c – standard base revision, the non-expanded version for basic single-channel flame monitoring requirements
- Forte™ BMS Main Controller – B&W burner management system main processing unit, the host system that receives flame status signals from the module to execute full boiler safety interlock logic
- 24 VDC Redundant Power Supply – B&W BMS system dedicated power module, delivering stable regulated power to the module and associated flame detectors
- Configuration Software – B&W dedicated setup tool, used to adjust flame detection sensitivity, threshold parameters and diagnostic alert settings for the 600c revision
- Flame Scanner Purge Air Assembly – B&W detector cooling and cleaning unit, providing continuous clean airflow to prevent dust accumulation on the SC series flame detector lens
- 169491 – ABB SPER1C1 supervision relay, the safety interlock component that works with the module to implement hardwired flame loss trip protection
- Modbus RTU Gateway Module – Industrial protocol conversion unit, enabling seamless integration between the module and plant-level DCS and SCADA systems
- SQ400I – B&W high-end 8-channel flame processing module, the expansion variant for large utility boilers with 8 or more independent burners requiring centralized flame monitoring
Frequently Asked Questions
- Q: Can the 8700700-600c be used directly with non-B&W third-party flame detectors?
A: No, this module is purpose-built for native compatibility with B&W SC-200 and SC-300 series UV/IR flame scanners. Using third-party detectors will result in incorrect signal processing and unreliable flame judgment performance. - Q: What is the maximum response time for the module to trigger a flame loss safety interlock?
A: The 600c revision has a maximum flame loss detection response time of <2 seconds, fully meeting NFPA 85 boiler combustion safety standard requirements for utility boiler BMS systems. - Q: Does the module support hot-swapping during boiler operation?
A: You must place the corresponding burner in a safe shutdown state and disable the associated BMS interlock logic before removing or installing the module, to avoid accidental boiler trip events. - Q: What should I do if the system reports “Flame Signal Drift” diagnostic alert?
A: First inspect the connected flame detector lens for dust or soot contamination and perform a full purge air system check. 85% of such alerts are resolved by cleaning the detector lens and re-running the module’s automatic calibration routine. - Q: Can I mix the 8700700-600c 600c revision with older revisions in the same BMS system?
A: B&W strongly recommends using matching hardware revisions with consistent firmware versions for all modules in the same BMS system, to ensure uniform flame detection sensitivity and avoid inconsistent interlock trip behavior across different burners.
