ProSoft AN-X2-AB-DHRIO — EtherNet/IP to DH+/Remote I/O Gateway

Key Features and Advantages

  • Multi-mode operation: Supports Remote I/O scanner, drive migration, PanelView migration, DH+ bridge and Flex I/O scanner modes.311
  • Phased migration support: Allows replacement of legacy PLCs, HMIs, drives or adapters while keeping existing field wiring and I/O racks in service.23
  • Built-in web server: Provides remote configuration, diagnostic display, file upload and operation-mode selection through a standard browser.23
  • microSD-based configuration: Stores firmware and configuration data on a removable microSD card, simplifying backup, restoration and offline editing.5
  • No PLC code change in many cases: Drive and PanelView migration modes can often be implemented without modifying existing controller logic.36
  • Compact industrial design: Small footprint with DIN rail mounting makes it suitable for control panels, retrofit cabinets and space-constrained installations.

 

Category: SKU: ProSoft AN-X2-AB-DHRIO Brand:

Description

ProSoft AN-X2-AB-DHRIO — EtherNet/IP to DH+/Remote I/O Gateway

Brand / Model: ProSoft Technology AN-X2-AB-DHRIO
Product Type: Compact industrial gateway for bridging Allen-Bradley EtherNet/IP networks with legacy Data Highway Plus and Remote I/O networks

AN-X2-AB-DHRIO

Product Description

The ProSoft AN-X2-AB-DHRIO is a protocol gateway designed to connect modern ControlLogix and CompactLogix controllers with legacy Allen-Bradley DH+ and Remote I/O networks. It enables phased migration of older PLC, HMI, drive and I/O assets without requiring immediate replacement of field equipment or extensive controller code changes.23

The AN-X2 generation uses a microSD card for firmware and configuration storage, eliminating the need for the legacy AnxInit utility. Configuration, diagnostics and operation-mode selection can be performed through its built-in web server or by editing configuration files on the microSD card.5

 

Technical Specifications

Item Description
Manufacturer ProSoft Technology / Quest Technical Solutions
Part Number AN-X2-AB-DHRIO
Ethernet Port 1 × RJ45, 10/100 Mbps EtherNet/IP
DH+/RIO Port 1 × 3-pin Phoenix connector for DH+/Remote I/O
Power Supply External 24 VDC via 3-pin Phoenix connector
Typical Power Consumption 200 mA @ 12 VDC or 100 mA @ 200 mA @ 24 VDC; max 2.4 W
Supported Baud Rates 57.6, 115.2 and 230.4 Kbaud for DH+/RIO
Configuration Built-in web server and microSD card
Operating Temperature 0 °C to 50 °C
Storage Temperature –40 °C to 85 °C
Humidity 5% to 95% RH, non-condensing
Dimensions 107 mm × 126 mm × 34 mm
Mounting DIN rail or desktop mounting

Values are based on published AN-X2-AB-DHRIO product documentation; exact electrical and environmental ratings should be confirmed against the latest ProSoft datasheet and user manual.35

 

Key Features and Advantages

  • Multi-mode operation: Supports Remote I/O scanner, drive migration, PanelView migration, DH+ bridge and Flex I/O scanner modes.311
  • Phased migration support: Allows replacement of legacy PLCs, HMIs, drives or adapters while keeping existing field wiring and I/O racks in service.23
  • Built-in web server: Provides remote configuration, diagnostic display, file upload and operation-mode selection through a standard browser.23
  • microSD-based configuration: Stores firmware and configuration data on a removable microSD card, simplifying backup, restoration and offline editing.5
  • No PLC code change in many cases: Drive and PanelView migration modes can often be implemented without modifying existing controller logic.36
  • Compact industrial design: Small footprint with DIN rail mounting makes it suitable for control panels, retrofit cabinets and space-constrained installations.

 

Operating Modes

  • Remote I/O Scanner: Replaces a legacy Remote I/O PLC with a ControlLogix or CompactLogix controller while retaining existing I/O racks; supports up to 32 Remote I/O racks.311
  • Drive Migration: Enables migration from legacy Remote I/O-connected drives to EtherNet/IP-enabled PowerFlex drives without changing PLC code; supports up to 4 EtherNet/IP drives.36
  • PanelView Migration: Supports migration from legacy PanelView terminals to PanelView Plus, PanelView Plus 6 or PanelView Plus 7 over EtherNet/IP; up to 8 PanelViews per network.3
  • DH+ Bridge: Bridges EtherNet/IP and Data Highway Plus networks, allowing programming terminals and processors on EtherNet/IP to access PLC-5 or SLC processors on DH+.38
  • Flex I/O Scanner: Allows connection to 1794-AENT EtherNet/IP Flex I/O adapters, serving as a replacement path for legacy 1794-ASB adapters.3

 

Typical Applications

  • Migration from PLC-5/SLC Remote I/O systems to ControlLogix or CompactLogix
  • Integration of legacy DH+ devices into EtherNet/IP control architectures
  • Replacement of obsolete 1794-ASB Remote I/O adapters
  • Upgrade of legacy PanelView HMIs to PanelView Plus without PLC reprogramming
  • Replacement or upgrade of legacy Allen-Bradley drives with EtherNet/IP-enabled drives
  • Brownfield plant retrofits requiring minimal downtime and wiring changes

 

Related Products

  • ProSoft AN-X2-AB-DHPIO: EtherNet/IP to DH+ gateway variant within the same AN-X2 family.
  • ProSoft MVI56 / MVI56E series: In-chassis communication modules for ControlLogix and CompactLogix platforms.
  • ProSoft MVI46 series: Communication modules for legacy Allen-Bradley PLC platforms.
  • Allen-Bradley 1794-AENT: EtherNet/IP adapter for FLEX I/O, often referenced in Flex I/O migration projects.
  • Allen-Bradley ControlLogix / CompactLogix controllers: Typical EtherNet/IP controllers used with the AN-X2-AB-DHRIO gateway.