IS200STCIH4A Product Introduction

  • Mark VI I/O Pack (DI pack)
  • IS200STCI series other terminal variants (STCIH2A / STCIH6A)
  • Speedtronic Mark VI controller rack, VME backplane
  • Turbine HMI and ToolboxST configuration software

 

Category: SKU: IS200STCIH4A Brand:

Description

IS200STCIH4A Product Introduction

 

Overview

The IS200STCIH4A is a Discrete Input Terminal Board (STCI) for GE Speedtronic Mark VI / Mark VIe turbine control systems. It is the field termination interface for contact digital input signals, routing hardwired status signals from field devices to the matching Mark VI I/O pack via ribbon cable. It is widely stocked as new original, surplus or refurbished spare for gas & steam turbine control cabinet maintenance and outage replacement.

IS200STCIH4A

Key Features & Benefits

  • 24 channels of optically isolated discrete digital input terminals
  • Designed for 24 VDC contact input signals, surge suppression and EMI filtering on each channel
  • Screw terminal block for convenient field wiring, 37-pin D-sub connector to mate with the I/O pack
  • Provides electrical isolation between field wiring and the turbine control backplane to reduce ground loop risk
  • Onboard signal conditioning circuit for stable contact status detection
  • Conformal-coated PCB, built to adapt to high vibration, high-temperature turbine cabinet environments
  • Supports TMR triple redundant architecture for safety-critical turbine protection logic
  • Used for equipment status feedback, limit switches, relay contacts and permissive interlock signals

 

Technical Specifications

Item Description
Manufacturer GE / Baker Hughes
Model IS200STCIH4A
Type STCI Discrete Input Terminal Board
Compatible System Speedtronic Mark VI, Mark VIe Turbine Control
Input Rating 24 VDC dry contact input
Input Channels 24 isolated DI channels
Threshold ON ≥19 VDC, OFF ≤5 VDC
Interface Screw terminals + 37-pin D-Sub to I/O pack
Operating Temperature -30°C ~ +65°C
OEM Status Discontinued, available as surplus / refurbished spare
Application Gas turbine, steam turbine generator control & protection

 

Typical Applications

IS200STCIH4A collects field contact signals in combined-cycle power plant turbine control panels, including breaker status, valve limit switches, lube oil permissives, emergency stop contact feedback and auxiliary equipment alarms. It works with Mark VI I/O packs to feed status points into the turbine control and protection logic. It is a standard high-demand spare for planned outages and cabinet retrofit.

 

Matching Companion Modules

  • Mark VI I/O Pack (DI pack)
  • IS200STCI series other terminal variants (STCIH2A / STCIH6A)
  • Speedtronic Mark VI controller rack, VME backplane
  • Turbine HMI and ToolboxST configuration software

 

Operation Notes

Hardware revision and firmware compatibility with the paired I/O pack must be confirmed before replacement. After swap, verify each channel’s dry-contact status and check for noise-induced false triggers. This board is part of the safety-related turbine permissive circuit; proper functional test is mandatory after replacement.

 

FAQ

Q: What is the difference between IS200STCIH4A and IS200STCIH6A? A: STCIH4A is for 24 VDC input; STCIH6A is the 125 VDC version; they are not drop-in interchangeable.

Q: Can it work with Honeywell Experion or DeltaV DCS? A: No. It is proprietary Mark VI turbine hardware and cannot be used on DCS racks.

Q: Is it a standalone I/O card? A: No, it is only a termination board; it must connect to a matching Mark VI digital input I/O pack.