Description
HYDRANM2 Product Introduction
Overview
The HYDRANM2 (Hydran M2) is an online dissolved gas & moisture-in-oil monitoring unit manufactured by GE Vernova for oil-immersed power transformers and other oil-filled high-voltage assets. It delivers continuous real-time DGA (Dissolved Gas Analysis) to detect incipient faults such as partial discharge, overheating and arcing long before catastrophic failure occurs. It supports either hydrogen-only sensor or composite gas sensor options, paired with moisture measurement, and can run IEEE / IEC transformer thermal ageing models when connected to auxiliary sensors. This proven field device is widely stocked as spare for substation and power plant transformer condition monitoring retrofits and replacement.

HYDRANM2
Key Features & Benefits
- Continuous monitoring of dissolved fault gas: H₂ (hydrogen) or composite gas mixture (H₂, CO, C₂H₂, C₂H₄)
- Integrated moisture-in-oil measurement, output in ppm and %RH for insulation degradation assessment
- No internal pumps or moving parts; low maintenance design
- Simple single-valve direct mounting on transformer oil drain valve, installation often without transformer outage
- Expandable analog/digital I/O for top oil temperature, load current and ambient temperature inputs
- Onboard IEEE / IEC transformer mathematical models to calculate hot-spot winding temperature and insulation ageing rate
- Configurable multi-level alarms based on gas concentration, moisture and trending values
- Built-in data logging, event history and trend storage for up to one year
- Standard RS485 Modbus, optional copper/fiber TCP/IP communication for SCADA, DCS and asset management platforms
- Local LCD display and menu keypad for on-site viewing, setup and diagnostics
- Compatible with mineral oil, natural ester and synthetic ester insulating fluids
- Self-diagnostic routines to validate sensor and electronics health
Technical Specifications
| Item | Description |
|---|---|
| Manufacturer | GE Vernova (GE Grid Solutions) |
| Model | HYDRANM2 / Hydran M2 |
| Type | Online Transformer DGA & Moisture Monitor |
| Gas Sensor Option | Hydrogen-only / Composite gas (H₂, CO, C₂H₂, C₂H₄) |
| Measurement | Dissolved fault gas (ppm), moisture in oil (ppm / %RH) |
| Auxiliary I/O | Expandable analog & digital inputs for temperature, load signals |
| Communication | RS485 Modbus standard; Ethernet / fiber optional |
| Local Interface | LCD display + keypad |
| Mounting | Direct mount on transformer oil valve |
| Operating Temperature | -40°C ~ +70°C |
| Status | Active product, also available as surplus / refurbished spare |
| Application | Power transformers, shunt reactors, oil-filled HV equipment condition monitoring |
Typical Applications
HYDRANM2 is deployed on main power transformers, generator step-up transformers and distribution transformers in utility substations, combined-cycle power plants and heavy industrial facilities. It provides early warning of insulation thermal degradation, partial discharge and arcing faults, supporting predictive maintenance and avoiding unplanned transformer outages. It is commonly integrated with SCADA, DeltaV, Experion or GE Perception APM asset management software.
Matching Companion & Upgrade Reference
- Hydran M2-X: newer upgraded successor model with extended sensor lifespan
- Auxiliary RTD / temperature sensors, current transducers
- GE Perception APM platform for fleet transformer analytics
Operation Notes
Select the correct sensor variant (hydrogen-only vs composite gas) before ordering. Verify oil compatibility and valve thread interface prior to installation. Configure alarm thresholds and transformer model parameters according to transformer nameplate and site maintenance guidelines. Isolate and purge sampling path during sensor replacement.
FAQ
Q: What is the difference between Hydran M2 and Hydran M2-X? A: M2-X is the newer generation with improved sensor life and enhanced firmware; mechanical mounting is similar but internal electronics and sensor modules are not directly interchangeable.
Q: Can it connect to DeltaV or Honeywell Experion C300? A: Yes, via Modbus communication, it can be mapped into DCS as a remote Modbus slave device. It is not a native DCS I/O module.
Q: Does it replace laboratory offline DGA oil sampling? A: It serves as continuous early-warning monitoring; periodic laboratory oil analysis is still recommended for full-spectrum gas testing.


