GE IS220PAICH2A (PAIC) Analog I/O Pack, Mark VIe Turbine Control Spare

  1. IS220PAICH1A
  2. IS420UCSBH1A
  3. IS420ESWBH3A
  4. IS220AEPAH1A
  5. IS200BPPBH1B
  6. IS200DSPXH1D
  7. IS200VSPAH1AAA
  8. IS200ERIOH1A
  9. IS200TSVOH1A
  10. IS200UCSAH1A
  11. IS420UCSBH4A
  12. IS420ESWBH4A
Category: SKU: GE IS220PAICH2A Brand:

Description

GE IS220PAICH2A (PAIC) Analog I/O Pack, Mark VIe Turbine Control Spare

 

Product Overview

The GE IS220PAICH2A (PAIC, part code 336A4940CSP11) is a distributed analog I/O pack for GE Vernova Speedtronic Mark VIe / Mark VIeS turbine control system. It is a 10AI + 2AO combined analog pack, responsible for collecting process analog signals and outputting 4–20mA control commands to field actuators. It communicates with UCSB controllers over dual redundant IONet Ethernet. This original imported spare is widely stocked for gas/steam turbine, combined-cycle and compressor control cabinet maintenance.

IS220PAICH2A

Key Technical Specifications

  • Part Number: IS220PAICH2A
  • Material Code: 336A4940CSP11
  • Brand: GE / GE Vernova
  • Module Type: PAIC Analog I/O Pack
  • I/O allocation: 10 Analog Inputs + 2 Analog Outputs
  • AI signal types: 4–20 mA, ±5 V, ±10 V, differential analog
  • AO signal type: 4–20 mA
  • A/D resolution: 16-bit
  • Isolation: Galvanic isolation, 1500 Vrms channel isolation
  • Communication: Dual 100 Mbps IONet Ethernet (redundant network)
  • Power supply: 18–30 VDC, nominal 28 VDC
  • Cooling: Fanless convection
  • Operating Temperature: -30 °C ~ +65 °C
  • Storage Temperature: -40 °C ~ +85 °C
  • Relative Humidity: 5% ~ 95 %, non-condensing
  • Mounting: Cabinet-mounted I/O pack, mates with terminal board via DB37 connector
  • Hot Swap: Supported under controlled maintenance
  • Weight: Approx. 0.38 kg
  • Software: Configured & diagnosed via ControlST
  • Safety: Suitable for SIL2 Mark VIeS safety control architecture

 

Main Features

  1. Combined 10-channel analog input + 2-channel analog output for turbine process control
  2. 16-bit high precision sampling for pressure, temperature, flow, LVDT and valve feedback
  3. Dual IONet Ethernet ports for network redundancy, avoiding single network point of failure
  4. Full galvanic isolation reduces ground loop interference in turbine island cabinets
  5. Built-in channel diagnostics: wire break, short circuit, out-of-range alarm
  6. Compact distributed I/O architecture, flexible layout near field sensors and valves
  7. Backward compatible, can mix with older Mark VIe I/O packs in simplex / TMR systems
  8. Rugged EMC and vibration-resistant design for power plant and oil & gas sites
  9. Output 4–20mA signal to control fuel valves, governor actuators and dampers
  10. High-demand legacy spare for brownfield Mark VIe turbine control loops

 

Product Application Information

IS220PAICH2A converts analog transmitter signals (pressure, temperature, valve position) into digital values and sends them to the UCSB controller via IONet. It also receives setpoints from the controller and outputs 4–20mA analog signals to modulate control valves and actuators. If this PAIC pack fails, the related analog measurement and control loop will be lost, causing regulation deviation, alarm or turbine trip. Power plants keep this spare for fast replacement to restore analog control function.

 

Application Scenarios

  • Combined-cycle gas turbine Mark VIe process measurement & valve control
  • Thermal power steam turbine governing and auxiliary process monitoring
  • Generator EX2100e excitation analog signal acquisition
  • Oil & gas centrifugal compressor anti-surge and process control
  • Refinery turbo-expander and large pump supervision
  • Waste-to-energy boiler turbine control
  • Captive power plant turbine auxiliary loop
  • Offshore platform rotating machinery control cabinet
  • LNG compressor skid analog monitoring
  • Legacy Mark VIe / VIeS system overhaul and spare backup

 

Matching / Supporting Components

  • IS420UCSBH1A / IS420UCSBH4A UCSB main controller
  • IS420ESWBH3A IONet Ethernet switch
  • Mark VIe terminal board (DB37 wiring base)
  • 28 VDC redundant cabinet power supply
  • Shielded IONet CAT5e cable and analog signal cable
  • ControlST engineering software
  • Field transmitters, LVDT, control valve positioners
  • Other Mark VIe I/O packs (DI/DO, AEPA, BPPB etc.)
  • Redundant IONet network architecture

 

Related 12 Model References

  1. IS220PAICH1A
  2. IS420UCSBH1A
  3. IS420ESWBH3A
  4. IS220AEPAH1A
  5. IS200BPPBH1B
  6. IS200DSPXH1D
  7. IS200VSPAH1AAA
  8. IS200ERIOH1A
  9. IS200TSVOH1A
  10. IS200UCSAH1A
  11. IS420UCSBH4A
  12. IS420ESWBH4A