Description
CX1020-0000 Product Introduction
Overview
The CX1020-0000 is a Beckhoff embedded PC PLC controller of the CX1000 series. Equipped with a 1 GHz Intel processor and passive fanless cooling, it runs TwinCAT 2 runtime to implement PLC logic, NC PTP positioning and NC I interpolated motion control. It adopts PC/104 bus expansion architecture and requires a matching CX1100 power supply module. This model has entered service phase (discontinued by original production) and is widely available as surplus or refurbished spare for retrofits and maintenance of legacy Beckhoff automation systems.

CX1020-0000
Key Features & Benefits
- Fanless passive cooling design, no rotating parts, high reliability for cabinet installation
- Built-in dual 10/100 Mbps Ethernet ports with internal integrated switch, supporting daisy-chain network topology
- CompactFlash boot storage, battery-backed real-time clock
- PC/104 expansion bus on both sides for adding fieldbus, serial and I/O interface modules
- Supports TwinCAT 2: PLC, NC PTP and NC I interpolation motion control
- Supports Windows Embedded CE 6 or Windows Embedded Standard 2009 operating system
- Front-panel diagnostic LEDs for power, LAN activity, TwinCAT status and Flash access
- DIN rail mountable, compact form factor for machine control cabinets
- CE and UL certified, meets industrial EMC and vibration standards
Technical Specifications
| Item | Description |
|---|---|
| Manufacturer | Beckhoff |
| Model | CX1020-0000 |
| Type | Embedded PC PLC Controller |
| CPU | 1 GHz Intel |
| RAM | 256 MB DDR (expandable up to 1 GB) |
| Storage | CompactFlash card |
| Ethernet | 2 × 10/100 Mbps RJ45, internal switch |
| Expansion Bus | PC/104 |
| Runtime Software | TwinCAT 2 (PLC / NC PTP / NC I) |
| Cooling | Passive heat sink (fanless) |
| Power Supply | Powered via CX1100 series power module |
| Protection Class | IP20 |
| Operating Temperature | 0°C ~ +50°C |
| OEM Status | Discontinued / Service phase |
| Application | Packaging machinery, printing lines, metal processing, automated production equipment |
Typical Applications
CX1020-0000 is widely deployed in automated machinery requiring motion and sequence control, such as packaging machines, textile equipment, printing presses, woodworking and special-purpose automation lines. It is used as a spare for planned machine downtime and replacement of old CX1000-series control nodes. The recommended modern upgrade series is CX2033 / CX2043.
Matching Companion Items
- CX1100 series power supply module
- Beckhoff KL/KL2000 Bus Terminals (E-bus / K-bus I/O)
- TwinCAT 2 engineering software
- PC/104 fieldbus expansion cards (Profibus, CANopen etc.)
Operation Notes
This controller only supports TwinCAT 2; it cannot run TwinCAT 3 natively. It must be stacked together with CX1100 power module and I/O terminals. Back up the TwinCAT project and image before replacement. Verify firmware, OS image and project compatibility.
FAQ
Q: Can CX1020-0000 replace CX1010? A: It can run the same TwinCAT 2 programs, and supports NC I interpolation which CX1010 does not. Mechanical stacking is compatible, but project validation is still required.
Q: Can it communicate with DeltaV or Honeywell Experion DCS? A: It supports Modbus TCP/RTU via TwinCAT, which can be integrated with DCS through protocol mapping. It is not a native DCS controller.
Q: What is the recommended replacement? A: Beckhoff CX2033 or CX2043 embedded controllers with TwinCAT 3.
