Allen-Bradley 80026-088-01 300W AC/DC Switching Power Supply

Category: SKU: Allen-Bradley 80026-088-01 300W Brand:

Description

Allen-Bradley 80026-088-01 300W AC/DC Switching Power Supply Product Introduction

 

Product Overview

The Allen-Bradley 80026-088-01 is a dedicated 300W high-performance AC/DC switching power supply purpose-built for the ‌PowerFlex 7000 medium voltage AC drive platform‌. As the core internal power distribution unit for the PowerFlex 7000 drive, it converts industrial AC mains input into a stable 56 VDC regulated output, which powers the drive’s control logic boards, gate drive circuits, and other critical internal components. It integrates full-circuit protection mechanisms and high-efficiency power conversion circuits, delivering exceptional reliability in harsh heavy industrial electrical environments .

This module is a factory-original Allen-Bradley certified power supply unit, fully optimized for seamless drop-in integration within the PowerFlex 7000 drive enclosure. It eliminates the need for external standalone power supplies, drastically reducing system wiring complexity and intermediate power distribution fault points. It is the industry-standard dedicated internal power solution for medium voltage variable frequency drive systems.

80026-088-01

Core Technical Specifications

Parameter Specification
Manufacturer Allen-Bradley (Rockwell Automation)
Part Number 80026-088-01
Product Type 300W AC/DC Switching Power Supply for PowerFlex 7000
Input Voltage Range 380–500 VAC 3-phase industrial mains input
Input Frequency 47–63 Hz
Nominal DC Output 56 VDC single regulated output
Maximum Output Current 3.4 A
Rated Total Output Power 300 W
Energy Conversion Efficiency 90% typical
Built-In Protection Overload protection, short circuit protection, over temperature protection
Output Quality Ultra-low ripple and noise
Dimensions 133 mm × 70 mm × 126 mm (5.24 in × 2.76 in × 5 in)
Product Weight 3.4 kg (7.5 lbs)
Operating Temperature Range 0°C to +50°C (32°F to +122°F)
Certifications CE, UL, CSA industrial compliance certified

 

Key Features

  • ‌Wide Industrial 3-Phase Mains Adaptability‌: The 380–500 VAC 3-phase ultra-wide input range is fully compatible with global industrial medium-voltage power grid standards, automatically adapting to different regional power supply specifications without requiring extra step-down transformers. The built-in active power factor correction circuit ensures stable power output even under severe mains voltage fluctuations.
  • ‌Full-Circuit Multi-Layer Protection‌: The module integrates complete overload, short circuit, and over-temperature protection mechanisms. When abnormal load or overheating conditions are detected, it automatically triggers safe shutdown to protect the rear-stage precision drive control boards from permanent damage, greatly improving the system’s fault tolerance.
  • ‌Ultra-Low Ripple & Noise Output‌: The advanced switching power supply topology delivers ultra-low ripple and noise 56 VDC output, eliminating high-frequency electrical interference that causes the drive’s gate drive signals to distort or mis-trigger. This ensures the stable operation of the PowerFlex 7000 drive’s high-precision vector control algorithm.
  • ‌Compact Rugged Industrial Design‌: The compact form factor is purpose-designed to fit perfectly inside the PowerFlex 7000 medium voltage drive enclosure, occupying minimal internal cabinet space. The heavy-duty metal enclosure and industrial-grade components ensure long-term stable operation in high-dust, high-vibration industrial environments.
  • ‌Seamless PowerFlex 7000 Platform Compatibility‌: This module is fully factory-validated for seamless compatibility with all standard PowerFlex 7000 medium voltage AC drive configurations. It is the official recommended spare part for PowerFlex 7000 drive power system maintenance, supporting direct hot-swap replacement without modifying any existing internal wiring.

 

Installation & Compatibility Notes

  • This module is an internal dedicated power unit exclusively designed for the PowerFlex 7000 medium voltage drive. It must be installed in the designated dedicated mounting position inside the drive enclosure, and cannot be used as a standalone general-purpose power supply for other industrial applications without proper electrical isolation protection.
  • Before performing any installation or replacement work, you must completely disconnect all 3-phase AC mains input power to the drive, and confirm that all internal high-voltage DC bus capacitors have been fully discharged to zero voltage with a certified multimeter. The module is a static-sensitive assembly, technicians must use a grounded anti-static wrist strap during installation and maintenance.
  • All input and output power wiring must strictly follow the official Allen-Bradley PowerFlex 7000 drive wiring diagram, using the specified wire gauge and tightening torque values. Improper wiring will cause overheating, voltage drop, or even permanent damage to the module and connected drive components.

 

Typical Applications

This dedicated 300W AC/DC switching power supply module is widely deployed on Allen-Bradley PowerFlex 7000 medium voltage AC drives across heavy industrial facilities including oil & gas pipeline transmission, mining, water treatment, power generation, and large manufacturing plants. It provides highly reliable uninterrupted internal power for the drive’s control system, ensuring that the variable frequency drive can maintain stable operation even under severe industrial power grid fluctuation conditions, effectively preventing unplanned drive shutdowns and costly production downtime .