ABB PM866AK02 (3BSE081637R1) AC 800M Redundant Processor Unit for System 800xA

  1. PM866AK01 – Single PM866A CPU (non-kit)
  2. PM866K01 – Earlier PM866 generation processor
  3. PM867K01 – Higher performance AC800M CPU
  4. PM864K02 – Older redundant CPU (obsolete, replaced by PM866AK02)
  5. CI854BK01 – PROFIBUS DP-V1 communication module
  6. CI853K01 – Dual RS232 serial interface
  7. BC810 – CEX bus redundancy module
  8. TP830 – CPU baseplate for PM866A
  9. TB807 – ModuleBus terminator
  10. TK851 – RCU redundancy link cable
Category: SKU: ABB PM866AK02 (3BSE081637R1) Brand:

Description

ABB PM866AK02 (3BSE081637R1) AC 800M Redundant Processor Unit for System 800xA

 

Product Introduction

The ABB PM866AK02 is a complete redundant CPU kit for the AC 800M controller under ABB System 800xA DCS platform, used to replace and upgrade older PM864 redundant CPU setsABB Group. It adopts MPC866 133 MHz processor, with 64 MB total RAM (51.389 MB available for user application) and 4 MB flash PROM for firmware storage. This kit includes two PM866A CPU modules, two TP830 baseplates, RCU redundancy link cable, CEX bus cable, ModuleBus terminators and backup batteries. Redundancy switching time is ≤10 ms, ensuring bumpless transfer during CPU fault. It connects to S800 I/O via ModuleBus and CEX bus, supports hot swap and is programmed by Compact Control Builder. It is widely used in high-availability process loops where uninterrupted control is mandatory.

ABB PM866AK02 (3BSE081637R1) AC 800M

Specification Parameters

Item Specification
Brand ABB
Model PM866AK02, PN: 3BSE081637R1
Platform AC 800M, System 800xA
Processor MPC866, 133 MHz
RAM 64 MB total, 51.389 MB application RAM
Flash 4 MB for firmware
Redundancy Dual CPU redundant kit, switchover ≤10 ms
Max Tasks / Apps 32 tasks, 32 applications per CPU
Minimum task cycle 1 ms
Supply 24 VDC (19.2 ~ 30 VDC)
Power consumption Typ 5.1 W, max 8.6 W per CPU
Bus ModuleBus, CEX bus, RCU redundancy link
Baseplate TP830 (included in kit)
Hot Swap Supported
Configuration Tool Compact Control Builder
Operating Temp 0 °C ~ +60 °C
Humidity 5%–95% non‑condensing
Certifications CE, UL, RoHS
Origin Sweden
Kit contents 2×PM866A, 2×TP830, cables, terminators, batteries

 

Application Scenarios

  • Petrochemical and refinery main DCS control loops
  • Thermal power plant boiler, turbine and auxiliary control
  • Pulp & paper mill bleaching and cooking process control
  • Offshore oil & gas platform high-availability control systems
  • Cement, mining and metallurgy continuous production lines
  • Large water treatment and desalination plants
  • Chemical batch and continuous process safety-critical loops
  • Upgrade / spare replacement for legacy PM864 redundant controllers

 

Recommended 10 Related Models

  1. PM866AK01 – Single PM866A CPU (non-kit)
  2. PM866K01 – Earlier PM866 generation processor
  3. PM867K01 – Higher performance AC800M CPU
  4. PM864K02 – Older redundant CPU (obsolete, replaced by PM866AK02)
  5. CI854BK01 – PROFIBUS DP-V1 communication module
  6. CI853K01 – Dual RS232 serial interface
  7. BC810 – CEX bus redundancy module
  8. TP830 – CPU baseplate for PM866A
  9. TB807 – ModuleBus terminator
  10. TK851 – RCU redundancy link cable

 

FAQ

Q1: What is the difference between PM866AK01 and PM866AK02? A1: PM866AK01 is a single PM866A CPU module; PM866AK02 is a complete redundant kit containing two CPUs, two baseplates and all required cables/accessories for redundant operationABB Group.

Q2: Can directly replace PM864K02? A2: Yes, ABB defines as the recommended upgrade spare for PM864K02 redundant processor setsABB Group.

Q3: Does it support hot swap? A3: Individual CPU module supports hot swap on TP830 baseplate following standard AC800M maintenance procedure.

Q4: What bus does it use for CPU redundancy? A4: RCU-Link (TK851 cable) is the dedicated redundancy synchronization link between the two CPUs.

Q5: Is discontinued? A5: It is a mature legacy AC800M processor kit. New original production has been phased out; available stock is new surplus or fully tested refurbished spares.

Q6: Can it work with S900 I/O? A6: PM866A is designed for S800 I/O system via ModuleBus / CEX bus; it is not native for S900 I/O.