Description
ABB 129740-002 SIO Assembly / SMART I/O SMART WEIGHT, Weighing Automation Spare Part
Product Overview
The ABB 129740-002, catalog name SIO ASSEMBLY/-102, is a complete SMART I/O weighing assembly designed for ABB HKQCS continuous weighing & feeder control systems. It is a pre-assembled weighing I/O unit that collects load cell weight signals, executes weight calculation, feeding rate control and communication with the main controller. Its direct replacement part is 129740-102. It is an original imported spare widely stocked for bulk material feeding, coal feeder, belt scale and gravimetric feeder maintenance in power, cement and mining plantsABB Group.

ABB 129740-002
Key Technical Specifications
- Part Number: 129740-002
- Replacement PN: 129740-102
- Brand: ABB
- Type: SIO Assembly (Smart I/O for Weighing)
- Compatible System: ABB HKQCS gravimetric feeder / weighing control
- Function: Load cell signal acquisition, weight computation, feeder speed control
- Gross Weight: 6.4 kg
- HS Tariff: 90329000
- Country of Origin: China
- Operating Temperature: -10 °C ~ +60 °C
- Storage Temperature: -40 °C ~ +85 °C
- Relative Humidity: 5% ~ 95%, non-condensing
- Mounting: Cabinet mounting assembly
- Communication: Internal bus to HKQCS master control unit
- Protection: Overload, signal fault, short-circuit diagnostics
- Product Type: OEM spare assembly (complete unit, not a single small PCB)ABB Group
Main Features
- Integrated smart I/O assembly specially for ABB HKQCS gravimetric weighing feeders
- High-precision sampling and conditioning for load cell millivolt weight signals
- Onboard calculation of actual weight, feeding flow rate and totalized material quantity
- Output speed regulation command for feeder drive to maintain set feed rate
- Built-in fault diagnostics: load cell break, signal drift, zero and span alarm
- Bidirectional data exchange with HKQCS main controller for setpoint and status upload
- Complete pre-wired assembly, fast swap-out for on-site maintenance
- Original ABB weighing spare; 129740-102 is the updated drop-in replacement
- Strong anti-vibration and EMC design for coal-fired power and bulk material sites
- Critical spare for gravimetric feeder, belt scale loss-on-feed control loops
Product Application Information
129740-002 receives weak millivolt signals from weighing load cells on gravimetric feeders. It converts, filters and calculates real-time material weight and feed rate, compares actual flow against the set value, and sends speed adjustment signals to the feeder motor drive. It transmits weight, flow, totalizer and alarm data to the HKQCS master controller and plant DCS. If this SIO assembly fails, the feeder loses weight feedback, resulting in uncontrolled feeding, coal-air ratio imbalance and boiler trip risk for power plants. Sites stock this unit to restore gravimetric feeder control quickly.
Application Scenarios
- Thermal power plant coal gravimetric feeder (HKQCS system)
- Cement raw meal / clinker loss-in-weight feeder control
- Mining bulk material belt scale and dosing system
- Biomass and waste-to-energy fuel feeding weighing
- Chemical powder and pellet gravimetric dosing
- Grain processing continuous weighing and batching
- Steel plant sinter material feeding control
- Lime and mineral processing feeder automation
- Port bulk cargo weighing and feeding skids
- Brownfield ABB HKQCS weighing system spare backup
Matching / Supporting Components
- ABB HKQCS main controller unit
- Weighing load cell and junction box
- Feeder VFD / servo drive
- Shielded load cell signal cable
- 24 VDC redundant power supply
- HKQCS configuration and calibration software
- Feeder speed encoder
- Cabinet air cooling and vibration isolation
- 129740-102 upgraded replacement assembly
- DCS communication gateway for weight data upload
Related 12 Model References
- 129740-102
- 134177-001
- 128877-103
- PCD230
- PPC907BE101
- PP845
- AI845
- CI840A
- CI854A
- TU810
- AO845A
- DI810


