Description
XVS-450-57MPI-1-10, Eaton (Moeller) XVS400 5.7-inch TFT Resistive Touch HMI, MPI communication variant, Windows CE platform
Core Product Introduction
The XVS-450-57MPI-1-10 belongs to Eaton XVS400 (MS2) Micro Panel family, a rugged embedded operator panel for machine-level visualization and control. It adopts 5.7” color TFT LCD + resistive touch, equipped with built-in Siemens MPI communication interface for direct connection to S7-300 / S7-400 PLCs. It supports optional integrated HMI/PLC runtime via license, running on Windows CE operating system. Widely used in packaging machinery, textile, printing, material handling and general OEM automation. This is the resistive touch TFT version, different from infrared touch XVS-460-57MPI and CSTN XVS-440-57MPI variants.

XVS-450-57MPI-1-10
Main Technical Specifications
| Item | Parameter |
|---|---|
| Part Number | XVS-450-57MPI-1-10 |
| Manufacturer | EATON (Moeller / Micro Innovation, Switzerland) |
| Series | XVS400 (MS2) Micro Panel |
| Display | 5.7″ TFT color LCD, 65536 colors |
| Touch Type | Resistive analog touch |
| Resolution | QVGA 320 × 240 |
| Communication Interfaces | MPI (Siemens), Ethernet, RS232, USB Device |
| Storage | CompactFlash card slot for project & firmware storage |
| Operating System | Windows CE |
| Programming Software | Eaton GALILEO visualization software |
| Power Supply | 24 VDC |
| Mounting | Panel flush mount |
| Front Protection | IP65 front face, IP20 rear side |
| Operating Temperature | 0 °C ~ +50 °C |
| Storage Temperature | -20 °C ~ +60 °C |
| Humidity | 10%–90% RH, non-condensing |
| Certifications | cULus, UL508, CE |
| Lifecycle Status | Obsolete / End of Life, only spare stock available |
| Weight | ~1.1 kg |
Quality Control Procedure
- Visual & Label Inspection: Verify original Eaton marking, part number XVS-450-57MPI-1-10, serial sticker, front panel seal integrity, no scratches on touch glass.
- 24VDC Power Boot Test: Apply 24V DC, confirm power LED, Windows CE boot sequence, no abnormal noise or overheating.
- Touch Screen Function Test: Full grid touch calibration, check no dead zones or drift.
- MPI Communication Test: Connect to Siemens S7-300 MPI port, verify tag read/write, cyclic data exchange.
- Ethernet Port Test: Set static IP, network ping and file download/upload via Ethernet.
- RS232 & USB Interface Test: USB download project, RS232 serial communication test.
- CF Card Read/Write Test: Backup and restore HMI project to CompactFlash card.
- Runtime & Alarm Simulation: Load GALILEO test project, test buttons, trends, alarms and recipe functions.
- Firmware Compatibility Check: Confirm firmware revision matches GALILEO software version.
- Packaging & Traceability: Shockproof foam packing, anti-static bag, serial-number QC report before shipment.
Frequently Asked Questions (FAQ)
Q1: What is the difference between XVS-450-57MPI and XVS-460-57MPI?A1: XVS-450-57MPI = resistive touch TFT; XVS-460-57MPI = infrared touch TFT. MPI communication function is the same.
Q2: Can it connect to Siemens S7-1200 / S7-1500?A2: Native MPI port only works for S7-300 / S7-400. S7-1200/1500 require Ethernet S7 protocol, which this panel also supports via Ethernet.
Q3: What software is used for programming?A3: Eaton GALILEO (older version for XVS400 series). Newer XV series HMIs use updated GALILEO or CODESYS.
Q4: Does it have built-in PLC?A4: Hardware supports optional HMI/PLC runtime, but a separate software license is required; not activated by default.
Q5: Is it a new production model?A5: Eaton has discontinued the XVS400 MS2 platform, no new production, only surplus / refurbished spare stock.
Q6: What is the replacement model?A6: Modern replacement series: Eaton XV100 / XV300 HMI, which no longer has native MPI; use Profinet or Ethernet/IP.
Installation & Configuration Guide
- Pre-install Preparation: 24VDC power supply, MPI cable / Profibus connector, Ethernet cable, GALILEO programming PC, CompactFlash card.
- Panel Cutout Mounting: Install into cabinet cutout, lock mounting clips, confirm front IP65 seal.
- Wiring: 24VDC power wiring, MPI bus cable to S7 PLC, separate signal cable away from inverter power cables.
- Power Up: Power on, wait for Windows CE boot and enter HMI runtime.
- Download Project: Download GALILEO project via Ethernet or USB.
- MPI Parameter Setup: Set MPI station address, baud rate, S7 PLC rack/slot mapping.
- Touch Calibration: Perform touch calibration from system menu if touch offset occurs.
- Recipe & Alarm Configuration: Set recipe storage path on CF card, alarm logging and trend sampling.
- Online Commissioning: Monitor real-time tags, test button operation and alarm triggering.
- Backup: Save source GALILEO project + CF card image for spare replacement.
Warning: MPI bus is sensitive to grounding and termination. Missing terminator will cause unstable communication and random disconnects.
Related Eaton XVS400 Series Models & Accessories (15 pcs)
| Model | Order Number | Description |
|---|---|---|
| Infrared touch 5.7” MPI | XVS-460-57MPI-1-10 | IR touch TFT version |
| CSTN 5.7” MPI | XVS-440-57MPI-1-10 | CSTN low-cost variant |
| 8.4” IR touch MPI | XVS-460-84MPI-1-10 | 8.4 inch infrared touch HMI |
| MPI bus cable | EATON-MPI-CAB-5M | 5m MPI programming cable |
| MPI terminator plug | 139968 | Profibus/MPI bus terminator |
| CompactFlash card | CF-64MB- | CF memory card for project |
| Touch glass replacement | XVS450-57-TOUCH-GLASS | Spare resistive touch panel |
| Front seal gasket | -GASKET-57 | IP65 replacement gasket |
| GALILEO programming software | GALILEO-V8 | HMI configuration tool |
| XV100 5.7” replacement | XV-102-57 | Modern replacement HMI |
| XV300 7” capacitive | XV-303-70 | Newer high-end HMI |
| RS232 programming cable | XVS-CAB-RS232 | Serial download cable |
| HMI/PLC runtime license | -PLC-LIC | Optional PLC runtime license |
| Panel mounting clip kit | -CLIP-KIT | Spare mounting clips |
| Power connector | -POWER-PLUG | 24VDC terminal plug |


