Description
X20CP1586 Product Introduction
Overview
The X20CP1586 is a high-performance X20-series CPU controller from B&R (now ABB group). It adopts Intel Atom 1.6 GHz processor plus a dedicated I/O co-processor, runs the Automation Studio runtime for PLC, motion control, robotics and complex formula calculation. It is built on the X20 modular bus architecture and equipped with native POWERLINK high-speed real-time bus interface, widely matched with B&R ACOPOSmulti / ACOPOS P3 servo drives and X20 I/O terminals. This model is mature legacy product, available as new original, surplus or refurbished spare for automation line maintenance.

X20CP1586
Key Features & Benefits
- Dual-processor architecture: main 1.6 GHz Intel Atom CPU + independent I/O processor, offloads cyclic I/O task, achieves fast control cycle down to 200 μs
- 512 MB DDR2 RAM, CompactFlash removable application storage (CF card sold separately)
- Onboard 1× Gigabit Ethernet (10/100/1000 Mbps RJ45) + POWERLINK V1/V2 interface, supports PRC poll response chaining for ultra-low jitter motion synchronization
- 1 expansion slot for adding communication modules (Profibus, CANopen, RS485 etc.)
- Front USB port for project download, diagnosis and data logging
- Battery-backed RTC for time stamp of alarms and events
- Fanless heat sink design, high vibration resistance for machine cabinet installation
- Hot-swappable I-bus I/O terminals; supports PLC, NC PTP, CNC interpolation, robotics control
- Status LEDs for RUN, ERROR, LAN, POWERLINK bus fault diagnosis
- CE, UL, RoHS certified, IP20 protection
Technical Specifications
| Item | Description |
|---|---|
| Manufacturer | B&R (Bernecker + Rainer, ABB) |
| Model | X20CP1586 |
| Type | X20 Modular PLC CPU Controller |
| CPU | Intel Atom 1.6 GHz + dedicated I/O processor |
| RAM | 512 MB DDR2 SDRAM |
| Storage | CompactFlash (separate order) |
| Network | 1 × Gigabit Ethernet, 1 × POWERLINK |
| Expansion | 1 slot for communication expansion card |
| USB | Front USB host port |
| Power Supply | 24 VDC (-15% ~ +20%) |
| Mounting | DIN rail X20 stackable |
| Protection Class | IP20 |
| Weight | 400 g |
| Operating Temperature | 0°C ~ +50°C |
| Software | Automation Studio |
| OEM Status | Legacy mature model, spare support available |
| Application | Multi-axis packaging, printing, metal forming, special machine automation |
Typical Applications
X20CP1586 is used as the master control node for high-speed multi-axis production lines, such as rotary packaging machines, printing presses, slitting lines and special process automation equipment. It sends synchronized motion commands to B&R 8LSA series servo motors (the 8LSA46.R0045D000-0 you previously listed) via POWERLINK. It is a critical spare for planned machine overhaul and CPU failure replacement.
Matching Companion Items
- X20 digital / analog I/O terminals (X20AI, X20AO, X20DI, X20DO)
- B&R ACOPOSmulti / ACOPOS P3 servo drives
- 8LSA series servo motors
- X20 communication expansion modules
- Automation Studio engineering software
Operation Notes
The CF card with matching runtime and project is required; the CPU itself does not carry application program. It must be stacked with X20 I/O terminals on the E-bus. After replacement, verify POWERLINK slave topology, motion axis mapping and safety logic. It is not interchangeable with X20CP1583 / X20CP1585 directly, due to different CPU performance and cycle capability.
FAQ
Q: Can X20CP1586 run EtherCAT? A: Not native; EtherCAT function needs additional X20 EtherCAT expansion module. Q: Can it communicate with Beckhoff CX1020? A: Yes via Modbus TCP, OPC UA or fieldbus gateway. Q: What is the difference between X20CP1586 and X20CP3586? A: CP3586 is the high-end version with 3 expansion slots; CP1586 only has one expansion slot.
