Vibro-Meter (Meggitt) VM600 MPC4 4-Channel Machinery Protection Core Processing Card

  • ‌IOC4T‌: Vibro-Meter dedicated 6-channel I/O interface card that natively pairs with MPC4 for complete signal input/output setup.
  • ‌CPUM‌: Vibro-Meter rack controller card that loads hardware configuration parameters to MPC4 during system boot.
  • ‌ABE04X‌: Vibro-Meter 4-slot system rack for housing MPC4, IOC4T and CPUM modules.
  • ‌200-510-078-115‌: Later hardware revision of with conformal coating for high-corrosion offshore environment use.

 

Category: SKU: Vibro-Meter-NEW Brand:

Description

Vibro-Meter (Meggitt) VM600 MPC4 4-Channel Machinery Protection Core Processing Card
‌Brand‌: Vibro-Meter (Meggitt PLC, Switzerland origin)
‌Product Line‌: VM600 Series Turbine & Rotating Machinery Protection System Family
‌Part Number Aliases‌: VM600 MPC4, 200-510-064-034, 200-610-100-034, Vibro-Meter MPC4 Vibration Protection Unit

VM600 MPC4

Core Technical Specifications

Parameter Verified Specification
Manufacturer Vibro-Meter (Meggitt PLC, Switzerland)
Product Type 4-Channel High-Precision Machinery Protection Core Processing Card
System Compatibility VM600 ABE04X/ABE056 racks, IOC4T I/O interface cards, CPUM rack controllers
Dynamic Input Channels 4 fully programmable channels (acceleration, velocity, displacement)
Tachometer Channels 2 dedicated speed measurement channels
Vibration Frequency Range 0.1 Hz to 10 kHz
Gap/Position Frequency Range DC to 1 Hz
Phase Measurement Accuracy ±0.1°
Safety Certification IEC 61508 SIL 1 / ISO 13849-1 PL c (SIL certified versions)
Hot-Swap Support Fully supported, no system shutdown required for replacement
Operating Temperature Range -20 °C to +60 °C
Vibration Compliance IEC 60068-2-6 industrial vibration resistance standard
Physical Dimensions 6U height (262 mm), 20 mm width, 187 mm depth
Front Panel Interface BNC connectors for direct signal access
Non-Volatile Memory Onboard local storage for persistent operational parameters
Standard Warranty 12 months

 

Main Features and Advantages

  • ‌VM600 System Native Seamless Integration‌: Purpose-built as the core processing module for VM600 machinery protection platforms, no extra signal conversion hardware required for direct backplane interconnection.
  • ‌Advanced DSP Real-Time Processing‌: Dedicated digital signal processing hardware delivers continuous real-time amplitude and phase monitoring for all connected channels.
  • ‌Ultra-High Phase Measurement Precision‌: ±0.1° phase analysis accuracy reliably identifies shaft misalignment and structural resonance faults at the earliest stage.
  • ‌Full Functional Safety Compliance‌: SIL 1 certified versions meet strict IEC 61508 functional safety requirements for oil/gas and nuclear industry critical applications.
  • ‌Rugged Harsh Environment Design‌: -20 °C to +60 °C wide operating temperature range and IEC 60068-2-6 vibration resistance suit offshore rig and power plant site conditions.
  • ‌Hot-Swap Maintainability‌: Supports live module replacement without system shutdown, drastically maximizing critical rotating equipment uptime.
  • ‌Persistent Parameter Storage‌: Onboard non-volatile memory retains operational parameters locally, eliminating full system reconfiguration after power loss.

 

Application Scenarios

  • Core vibration protection processing unit for turbine and rotating machinery protection system deployments
  • Power plant steam/gas turbine, generator, and large pump continuous vibration and speed condition monitoring
  • Petrochemical refinery, offshore platform, and pipeline compressor critical machinery safety interlock protection
  • Wind farm wind turbine gearbox and drive train predictive fault detection, reducing unplanned downtime by up to 40%
  • Legacy system retrofit, preventive maintenance, and spare part replacement projects
  • Industrial automation systems requiring high-reliability SIL-rated machinery protection for critical rotating asset safety applications

 

Related Model Recommendations

  • ‌IOC4T‌: Vibro-Meter dedicated 6-channel I/O interface card that natively pairs with MPC4 for complete signal input/output setup.
  • ‌CPUM‌: Vibro-Meter rack controller card that loads hardware configuration parameters to MPC4 during system boot.
  • ‌ABE04X‌: Vibro-Meter 4-slot system rack for housing MPC4, IOC4T and CPUM modules.
  • ‌200-510-078-115‌: Later hardware revision of with conformal coating for high-corrosion offshore environment use.

 

Related News & FAQ

  • ‌Q1: What is the typical market price range?‌ A: Authorized global distributors list pricing from ‌USD 2000–15000‌, depending on unit condition, stock quantity, and regional supply chain availability.
  • ‌Q2: Is this part still in active production?‌ A: Meggitt has not issued an official end-of-life notice; new original, surplus, and refurbished units remain widely stocked across global industrial automation suppliers.
  • ‌Q3: What is the phase measurement accuracy?‌ A: It delivers ±0.1° phase analysis precision for highly accurate misalignment and resonance fault identification.
  • ‌Q4: What is the standard delivery lead time?‌ A: Most distributors with in-stock inventory can ship via international courier (DHL/FedEx) within 3–7 working days.
  • ‌Q5: How do you configure a replacement ?‌ A: You must push the correct setup file via VibroSight or MPS software after installation to eliminate channel configuration mismatch errors.