VE4001S2T2B4 Product Introduction

  • VE4002S1T2B4 – DeltaV S‑Series discrete output module
  • DeltaV S‑Series I/O carrier & terminal block assemblies
  • DeltaV controllers and EIOC interface cards
Category: SKU: VE4001S2T2B4 Brand:

Description

VE4001S2T2B4 Product Introduction

 

Overview

The VE4001S2T2B4 is an Emerson DeltaV S‑Series traditional discrete input I/O module for the DeltaV distributed control system (DCS). It collects 24 VDC field discrete status signals and transmits validated digital data back to the DeltaV controller for process monitoring, interlock logic and alarm handling. It adopts a snap‑in carrier mounting design, supporting hot‑swap replacement without field wiring disconnection, widely used for legacy power, oil & gas and chemical plant spare maintenance. This module is OEM end‑of‑life and commonly supplied as surplus or refurbished spare part.

Key Features & Benefits

  • 24 VDC discrete input interface for dry contact or powered field sensors
  • Channel‑level built‑in diagnostics, open‑wire detection and fault LED indication for rapid troubleshooting
  • S‑Series snap‑lock mechanical design, enabling tool‑less module removal while terminal wiring remains intact
  • Supports redundant DeltaV I/O bus communication to improve system availability
  • Isolated signal circuit design, suppressing ground loop interference and protecting backplane circuits
  • Conformal coated PCB, suitable for high‑vibration, EMI‑prone control cabinet environments
  • Seamless configuration via DeltaV Explorer software
  • Compact modular form factor, fits standard DeltaV S‑Series I/O carrier slots

 

Technical Specifications

Item Description
Manufacturer Emerson
Model VE4001S2T2B4
Product Type DeltaV S‑Series Discrete Input Module
Compatible System DeltaV DCS
Field Signal 24 VDC discrete input
Mounting S‑Series I/O Carrier
Communication DeltaV proprietary I/O bus, redundant capable
Diagnostic Per‑channel fault detection, status LEDs
Operating Temperature -40°C ~ +70°C
Humidity 5%–95% RH, non‑condensing
OEM Status Discontinued, available as surplus / refurbished spare
Application Power generation, oil & gas, chemical process DCS

 

Typical Applications

VE4001S2T2B4 is deployed in DeltaV control racks to capture equipment status, limit switches, relay contact feedback, valve position indication and emergency interlock discrete signals. It is a critical spare for combined‑cycle power plants, refineries and chemical facilities during planned outages and obsolescence upgrades of legacy DeltaV S‑Series I/O subsystems.

 

Matching Companion Modules

  • VE4002S1T2B4 – DeltaV S‑Series discrete output module
  • DeltaV S‑Series I/O carrier & terminal block assemblies
  • DeltaV controllers and EIOC interface cards

 

Operation Notes

Confirm firmware compatibility with the existing DeltaV controller and I/O carrier before replacement. After installation, download configuration and verify each channel status and open‑wire diagnostic function. Follow Emerson DeltaV service procedures for hot‑swap operation.

 

FAQ

Q: Can VE4001S2T2B4 be mixed with M‑Series DeltaV I/O? A: S‑Series and M‑Series I/O use different carrier hardware; they cannot be installed on the same carrier assembly, though they work under the same DeltaV host software.

Q: Is this module compatible with GE Speedtronic Mark V / Mark VI / Mark VIe? A: No. It belongs to Emerson DeltaV DCS ecosystem and is not interoperable with GE turbine control platforms.