MTL4850 | Eaton MTL

remains one of the most widely selected SIL3 HART multiplexers for process safety projects. Many EPCs and end‑users specify this module when they require HART diagnostics on SIS loops without impacting safety integrity. Eaton periodically releases firmware updates to improve compatibility with modern HART 7 devices and asset management software. While newer instrument networking solutions are available for new projects, the is still heavily used in brownfield SIS revamps, transmitter replacement projects and spare stock for plants with large installed MTL IS infrastructure.

Category: SKU: MTL4850 Brand:

Description

MTL4850 | Eaton MTL

 

Title

MTL4850 SIL3 32‑Channel HART Multiplexer

 

Product Description

The Eaton MTL4850 is a high‑integrity HART multiplexer module designed to access digital HART data from smart 4–20mA field transmitters without interfering with the primary analog control loop. It serves as a dedicated interface between HART instruments and host instrument management software, asset management systems, DCS or safety systems. Each module supports up to 32 HART channels, aggregated onto a single RS485 multidrop network. Multiple MTL4850 units can be chained together, allowing a single RS485 bus to serve as many as 2016 HART devices. Certified SIL3 compliant under IEC 61508, this non‑intrusive multiplexer is safe for deployment on safety instrumented loops, making it ideal for both new greenfield builds and brownfield retrofit projects. It is commonly paired with MTL intrinsic safety isolators and termination assemblies for hazardous‑area instrumentation layouts.

MTL4850

Technical Specifications

Item Parameter
Catalog Number MTL4850
Manufacturer Eaton MTL
Product Type HART Multiplexer
Channel Count 32 channels per module
HART Revision HART 5, 6, 7
Host Interface RS485 2‑wire multidrop
Baud Rate Auto‑detect: 1200 / 9600 / 19200 / 38400 bps
Max Modules per RS485 Bus 63 modules (max 2016 HART loops)
Supply Voltage 19–35 VDC (nominal 24 VDC)
Operating Temperature -40°C ~ +70°C
Isolation Channel‑to‑channel, field side, RS485 and power isolation
Safety Rating SIL3 (IEC 61508)
Hazardous Area Approval ATEX, IECEx, CSA, FM, Zone 2 / Division 2 mounting
Alarm Output Open‑collector fault alarm output
Diagnostics Front‑panel LED indicators, onboard event log
Firmware Upgradeable
Form Factor Compact DIN‑rail / backplane mountable module
Relative Humidity Up to 95% non‑condensing

 

Key Features & Advantages

  1. SIL3 Non‑Interfering HART Access It reads HART digital data without disturbing the 4–20mA analog control signal, suitable for safety‑related SIS loops where loop integrity must be preserved.
  2. High‑Density 32‑Channel Modular Design Compact 32‑channel architecture reduces cabinet space and wiring overhead compared to discrete HART modems, supporting scalable instrument management.
  3. Large Network Capacity over RS485 Up to 63 MTL4850 modules can be connected on one multidrop link, enabling centralized configuration, calibration and diagnostics for thousands of smart transmitters.
  4. Auto Baud Detection & Simple Addressing Automatic baud rate recognition simplifies commissioning; configuration is straightforward for site engineers and system integrators.
  5. Comprehensive Diagnostics & Fault Alarm Visual LED status and hardware alarm output report communication failures, module faults and loop anomalies for fast troubleshooting. Onboard event logging supports audit trails for regulated sites.
  6. Wide Environmental Rating Extended operating temperature range from -40°C to +70°C supports outdoor, sheltered and harsh control cabinet installations in oil, gas and chemical facilities.
  7. Seamless Integration with MTL IS Family Perfectly matched with MTL4500 intrinsic safety isolators and termination assemblies for intrinsically safe field instrumentation in hazardous zones.

 

Typical Applications

Oil & gas production, refineries, petrochemical plants, chemical processing, pharmaceutical, power generation, fire and gas systems, safety instrumented systems (SIS), smart transmitter management, 4–20mA HART loop retrofit, hazardous area instrumentation cabinets.

 

Brand History (Eaton MTL)

MTL Instruments was founded in the UK and became a global pioneer in intrinsic safety barriers, isolators and hazardous-area signal conditioning. It was acquired by Eaton and grouped under the Crouse‑Hinds portfolio. MTL established its reputation for safety‑certified interface products for process industries. The series succeeded the older MTL4840 HART multiplexer platform, delivering SIL‑capable HART aggregation for modern safety standards. Eaton MTL continues to develop intrinsically safe interfaces, signal isolators and instrument networking products for process safety and control systems worldwide.

 

Related News & Events

remains one of the most widely selected SIL3 HART multiplexers for process safety projects. Many EPCs and end‑users specify this module when they require HART diagnostics on SIS loops without impacting safety integrity. Eaton periodically releases firmware updates to improve compatibility with modern HART 7 devices and asset management software. While newer instrument networking solutions are available for new projects, the is still heavily used in brownfield SIS revamps, transmitter replacement projects and spare stock for plants with large installed MTL IS infrastructure.

Short Sales Blurb (for quotation / product list)

Eaton MTL SIL3 32‑Channel HART Multiplexer, non‑intrusive for 4–20mA loops, multidrop, supports HART 5–7, ATEX/IECEx certified, for safety instrumented system HART diagnostics and smart transmitter management.