KONGSBERG RCU502 | Remote Controller Unit for K-Chief 700 & K-Pos DP

  1. RCU500
  2. RCU501
  3. RCU502i
  4. RCU510
  5. RCU602
  6. RIO400
  7. RIO800
  8. RMP420
  9. SBC500
  10. AOU400
  11. DIU400
  12. AIU400
Category: SKU: KONGSBERG RCU502 Brand:

Description

KONGSBERG RCU502 | Remote Controller Unit for K-Chief 700 & K-Pos DP

 

Product Overview

KONGSBERG RCU502 is an upgraded real-time remote controller unit within the Kongsberg K-Chief 700 marine automation ecosystem, succeeding RCU500 and RCU501. It serves as a distributed process control node for vessel automation, dynamic positioning, machinery monitoring and K‑Safe safety systems. It executes local control logic, collects field I/O signals, communicates with operator stations and remote I/O racks, and supports hot‑redundant pairing for bumpless transfer. It is an original imported marine spare widely used on merchant ships, offshore vessels, FPSOs and drilling rigs.

RCU502

Technical Specifications

  • Brand: Kongsberg Maritime
  • Model: RCU502
  • Processor: MPC8245 PowerPC 400 MHz
  • Memory: 64 MB ECC SDRAM, 16 MB Flash
  • OS: VxWorks real-time operating system
  • Power Supply: 24 VDC (18 ~ 32 VDC), max 20 W
  • Local I/O: Integrated AI / AO / DI / DO + relay outputs
  • Communication Interfaces:
    • Dual 10/100 Mbps Process Ethernet
    • Dual RedundancyNet for standby synchronization
    • Dual RBUS bus for RIO / RMP remote I/O
    • Dual PROFIBUS DP, Dual CAN bus
    • Multiple isolated RS232 / RS422 / RS485 serial ports for NMEA sensors
  • Operating Temperature: -25°C ~ +70°C
  • Humidity: Up to 98% RH, non‑condensing
  • Vibration standard: IEC 60945 marine environmental rating
  • Certifications: DNV, ABS, ATEX Zone 2, SIL 2 capable
  • Mounting: DIN rail rack mount
  • Condition: Original imported marine automation spare, EOL legacy unit

 

Main Features

  1. Deterministic real-time control for marine DP, propulsion and cargo control loops
  2. Dual RedundancyNet, supports hot standby redundant configuration with bumpless switchover
  3. Dual RBUS interface for connection with RMP420, RIO400 series distributed I/O
  4. Rich multi-protocol interfaces to connect gyrocompass, GPS, wind sensors and third-party equipment
  5. Built-in hardware watchdog and comprehensive BIST self-diagnosis
  6. Marine ruggedized design with salt mist, shock and EMC protection
  7. Compatible with K-Chief 700, K-Pos DP and K-Safe ESD safety platform
  8. Front LED indicators for run status, fault and communication diagnosis
  9. Supports hot-swap replacement inside marine automation cabinet

 

Application Scenarios

  • Kongsberg K-Chief 700 integrated vessel automation
  • K-Pos dynamic positioning (DP) for offshore rigs, FPSOs and supply vessels
  • Ship machinery alarm and monitoring system
  • Propulsion remote control and steering gear control
  • Ballast, cargo tank level and temperature monitoring
  • Offshore fire & gas detection and ESD safety interlock
  • Power management system on board vessels and offshore platforms

 

Supporting & Matching Components

  • RIO400, RMP420 remote I/O modules
  • RBUS communication cables and bus terminators
  • RedundancyNet sync cables
  • Marine sensors: gyro, GPS, anemometer, level transmitters
  • K-Chief operator workstation & configuration software
  • System power supply and rack chassis

 

Related Similar Models (12 pcs)

  1. RCU500
  2. RCU501
  3. RCU502i
  4. RCU510
  5. RCU602
  6. RIO400
  7. RIO800
  8. RMP420
  9. SBC500
  10. AOU400
  11. DIU400
  12. AIU400