IC695CHS012 Product Introduction

  • RX3i CPU modules (IC695CPE310, IC695CPE330 etc.)
  • RX3i power supply IC695PSA040 / IC695PSD140
  • RX3i I/O modules, communication modules
  • IC695CHS016 (16-slot version backplane)
  • Proficy Machine Edition engineering software

 

Category: SKU: IC695CHS012 Brand:

Description

IC695CHS012 Product Introduction

 

Overview

The IC695CHS012 is a 12-slot Universal Dual-Bus Backplane for Emerson (GE Fanuc) PACSystems RX3i PLC system. It adopts dual-bus architecture (PCI bus + serial bus), supporting both new IC695 RX3i modules and legacy IC693 / IC694 / Series 90-30 I/O modules, realizing mixed module installation. It is the mechanical carrier and signal bus foundation for CPU, power supply, I/O and communication modules, equipped with expansion interface for cascading additional remote backplanes. This legacy rack backplane is discontinued and available as surplus or refurbished spare for power plant and industrial control cabinet maintenance.

IC695CHS012

Key Features & Benefits

  • 12-slot universal backplane, horizontal installation; slot 0 is dedicated for power supply module
  • Dual-bus design: PCI high-speed bus for IC695 modules and serial bus for 90-30 series legacy modules
  • Built-in grounding bar and shield grounding terminal, good EMC performance for high-noise cabinet environment
  • Reserved serial expansion port for connecting expansion/remote backplanes
  • Supports hot-swap of I/O and communication modules (CPU cannot be hot swapped)
  • Left-side terminal block for isolated +24V auxiliary signal
  • Reinforced metal frame, anti-vibration design suitable for turbine auxiliary and heavy industry control cabinets
  • Compatible with AC / DC RX3i power supply modules

 

Technical Specifications

Item Description
Manufacturer Emerson / GE Fanuc
Model IC695CHS012
Type RX3i 12-Slot Universal Backplane
Slot Quantity 12 slots
Bus Type PCI + Serial dual bus
Compatible Modules IC695, IC694, IC693, Series 90-30 modules
Backplane Power Draw 240mA @ 5VDC, 600mA @ 3.3VDC
Mounting Horizontal DIN rail / panel mount
Protection Class IP20 (Install inside NEMA Type1 cabinet)
Operating Temperature -20°C ~ +60°C
Storage Temperature -40°C ~ +70°C
OEM Status Discontinued, surplus/refurbished spare available
Application Power plant auxiliary control, water treatment, metal industry, legacy RX3i PLC system

 

Typical Applications

IC695CHS012 is widely used in PACSystems RX3i PLC racks for combined-cycle power plant auxiliary systems, water treatment, steel and other heavy industry. It carries RX3i CPU, DI/DO/AI/AO modules and Profinet/Profibus communication modules to complete sequence control, interlock and analog closed-loop regulation. It is a critical spare for rack overhaul and backplane failure replacement during planned outages.

 

Matching Companion Items

  • RX3i CPU modules (IC695CPE310, IC695CPE330 etc.)
  • RX3i power supply IC695PSA040 / IC695PSD140
  • RX3i I/O modules, communication modules
  • IC695CHS016 (16-slot version backplane)
  • Proficy Machine Edition engineering software

 

Operation Notes

Must be installed horizontally to satisfy heat dissipation requirements, keep 102mm clearance for cooling airflow. Confirm module compatibility before replacement; legacy 90-30 modules cannot be used on single-bus RX3i backplanes. After replacement, check all bus communication and module identification status.

 

FAQ

Q: What is the difference between IC695CHS012 and IC695CHS016? A: CHS012 is 12-slot; CHS016 is 16-slot, same dual-bus architecture, different slot capacity. Q: Can it run independently? A: No, it is only the backplane carrier; CPU, power supply and I/O modules are required. Q: Can it communicate with DeltaV or Experion DCS? A: The RX3i CPU can exchange data with DCS via Profinet / Modbus TCP; the backplane itself has no communication function.