Description
GE IS420UCSBH1A (UCSB) Universal Controller Module, Mark VIe / Mark VIeS Turbine Control Spare
Product Overview
The GE IS420UCSBH1A, designated UCSB, is a high-performance real-time controller for GE Vernova Speedtronic Mark VIe and Mark VIeS turbine control systems. It executes core turbine control, sequencing, governor regulation and protection logic, and communicates with distributed I/O packs over the dedicated IONet Ethernet bus. It also supports EX2100e excitation and LS2100e generator control platforms. This original imported controller is widely stocked for power plant gas/steam turbine, combined-cycle and compressor control cabinet maintenance, available for simplex, dual or triple redundant configurations.

oplus_2097152
Key Technical Specifications
- Part Number: IS420UCSBH1A
- Brand: GE / GE Vernova
- Module Type: UCSB Universal Control System Board
- Processor: 600 MHz Intel EP80579
- Memory: 256 MB ECC DDR2 RAM, 2 GB Flash
- Supply Voltage: 18–30 VDC, nominal 24/28 VDC
- Interfaces:
- Multiple IONet Ethernet ports for I/O communication
- Plant network Ethernet (Modbus TCP, IEC 61850)
- RS232 local service port
- Safety: SIL 2 capable (per IEC 61508), ATEX / Ex ec IIC T4 Gc hazardous area certifiedGE Vernova
- Software: ControlST
- Operating Temperature: 0 °C ~ +60 °C
- Storage Temperature: -40 °C ~ +85 °C
- Relative Humidity: 5% ~ 95 %, non-condensing
- Mounting: Plug-in in Mark VIe rack
- Hot Swap: Supported under controlled maintenance
- Weight: Approx. 0.8 kg
- Cooling: Fanless heatsink design
Main Features
- Main real-time controller for Mark VIe / VIeS turbine and safety control
- Dedicated IONet deterministic Ethernet for distributed I/O packs
- Supports turbine governor, fuel control, startup sequence and machine protection
- SIL2 suitable for critical trip and protection loops
- Compatible with EX2100e excitation and LS2100e generator control
- Fanless rugged design for turbine island cabinet EMI environment
- Rich LED status indicators for CPU, network, fault and health
- Redundancy ready: dual or triple redundant TMR architectures
- Configuration, trending and fault diagnosis via GE ControlST software
- High-value critical spare for combined-cycle, thermal and oil&gas turbo-machinery
Product Application Information
IS420UCSBH1A runs the core turbine control application, sampling I/O values, calculating governor setpoints, firing commands and protective trip logic. It exchanges data with I/O packs, local HMI, plant DCS and historians. If this UCSB controller fails, the turbine control segment will lose regulation and protection functions, which may lead to unit trip. Power plants keep this controller as critical spare to minimize unplanned outage risk.
Application Scenarios
- Combined-cycle gas turbine Mark VIe control rack
- Thermal power steam turbine governing & protection
- Generator EX2100e excitation control system
- Oil & gas centrifugal compressor control & anti-surge
- Refinery turbo-expander and large rotating machinery control
- Waste-to-energy boiler turbine supervision
- Captive power plant turbine automation
- Offshore power generation unit control
- Pumped storage unit turbine governor
- Brownfield Mark VIe / Mark VIeS overhaul and spare backup
Matching / Supporting Components
- Mark VIe I/O packs (IS200 series AI/AO/DI/DO, AEPA, BPPB etc.)
- Mark VIe rack, backplane and power supply
- IONet Ethernet switches and shielded cables
- ControlST programming & diagnostic software
- Mark VIe HMI operator panel
- Redundant UCSB for dual / TMR trip configuration
- Turbine LVDT, RTD, pressure transmitters and speed probes
- Trip relay terminal boards
- Cabinet cooling and surge protection
Related 12 Model References
- IS420UCSBH4A
- IS421UCSBH1A
- IS420UCSCH1A (UCSC)
- IS420UCSBS1A
- IS200UCSAH1A
- IS200AEPAH1A
- IS200BPPBH1B
- IS200DSPXH1D
- IS200CRXMG1A
- IS200VSPAH1AAA
- IS200ERIOH1A
- IS200TSVOH1A


