GE IS220PVIBH1A, Mark VIe PVIB Vibration Monitor I/O Pack, Non-safety Vibration & Keyphasor Input Module

Model Order Number Description
Updated Non-safety Vibration Pack IS420PVIBH1B Replacement for IS220PVIBH1A
SIL Safety Vibration Pack IS220YVIBS1A SIL rated vibration I/O pack
Safety Vibration Updated Version IS420YVIBS1B New SIL vibration pack
PVIB Terminal Board IS200TVBAH2A TVBA termination board for PVIB
Mark VIe Controller IS220UCSAH1A Mark VIe main controller
IONet Switch Module IS420ESWBH2A Mark VIe IONet Ethernet switch
Rack Power Supply IS200PSAH1A Mark VIe 24VDC power supply
Proximity Probe 330104-00-05-10-02-00 Bently 3300 series probe
Probe Extension Cable 330730-080-00-00 Probe extension cable
Keyphasor Sensor BENTLY 330105 Magnetic pickup keyphasor
IONet Patch Cable GE-CAB-IONET Mark VIe IONet Ethernet cable
Mark VIe Backplane IS200CHS02A I/O pack rack backplane
Analog Input Pack IS210AEAAH1B 4-20mA AI I/O pack
Digital Input Pack IS210AEDAH1B DI I/O pack
ToolboxST Software TOOLBOXST-LIC Mark VIe configuration & diagnostic software
Category: SKU: GE IS220PVIBH1A, Brand:

Description

GE IS220PVIBH1A, Mark VIe PVIB Vibration Monitor I/O Pack, Non-safety Vibration & Keyphasor Input Module

 

Core Product Introduction

The IS220PVIBH1A is a high-speed vibration monitoring I/O pack for the GE Mark VIe turbine control platform. It acquires and processes signals from eddy-current proximity probes, velocity transducers and one keyphasor input for shaft speed and phase reference. It is widely deployed on gas turbines, steam turbines, centrifugal compressors and generator sets, used for shaft vibration, thrust position, eccentricity and rotational speed monitoring. It transmits high-resolution vibration data over IONet to the Mark VIe controller for protection, trending and machinery diagnostics. This legacy vibration pack is mainly supplied as spare replacement; the newer drop-in replacement model is IS420PVIBH1B.

IS220PVIBH1A

Main Technical Specifications

Item Parameter
Part Number IS220PVIBH1A
Manufacturer GE Vernova (GE Gas Power)
Platform Mark VIe Speedtronic
Function PVIB Vibration Monitor Pack
Channel Configuration 8 vibration / position inputs + 4 auxiliary inputs + 1 keyphasor input (total 13 sensor channels)
Supported Sensors Eddy current proximity probes, velocity transducers
Probe Excitation -24 VDC probe power
Communication Dual 10/100 Mbps IONet Ethernet
Termination Mate TVBA terminal board
Power Supply 24 VDC from I/O pack backplane
Hot Swap Supported
Operating Temperature -30 °C ~ +65 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 5%–95% RH, non-condensing
Mounting Mark VIe I/O pack backplane slot mount
Weight ~0.38 kg
Certifications cULus, CE
Lifecycle Status Obsolete, spare stock available; replacement: IS420PVIBH1B

 

Quality Control Procedure

  1. Visual & Label Inspection: Verify original GE marking, part number IS220PVIBH1A, serial number, dual Ethernet ports, gold edge fingers; no bent pins, burn marks or PCB corrosion.
  2. Backplane Power Boot Test: Install on Mark VIe test backplane, apply 24VDC, confirm PWR, ATT, LINK, TX/RX LED sequence, no abnormal heating.
  3. IONet Communication Test: Establish IONet link with controller, confirm ToolboxST can read module identity and hardware status.
  4. Probe Excitation Output Test: Verify stable -24VDC excitation supply for proximity probes.
  5. Vibration Channel Input Test: Inject simulated AC vibration signals to each channel, confirm accurate amplitude reading.
  6. Keyphasor Input Test: Simulate pulse signal, verify speed and phase calculation.
  7. Diagnostic Alarm Simulation: Simulate probe open circuit, short circuit and IONet disconnection, check fault reporting.
  8. TVBA Termination Compatibility Check: Confirm interface match with TVBA terminal assembly.
  9. Firmware Compatibility Check: Confirm firmware revision matches site ControlST / ToolboxST baseline (minimum V06.01 for IS420 replacement).
  10. Packaging & Traceability: Anti-static packaging, foam protection, serial-number QC test report before shipment.

 

Frequently Asked Questions (FAQ)

Q1: What is the replacement part for IS220PVIBH1A?A1: IS420PVIBH1B is the updated non-safety vibration pack, backward compatible, requires ControlST V06.01 or newer.

Q2: What is the difference between IS220PVIBH1A and IS220YVIBS1A?A1: = non-safety vibration pack; IS220YVIBS1A = SIL-certified safety vibration pack for turbine protection applications.

Q3: What terminal board does it use?A3: It pairs with TVBA terminal board; it is NOT compatible with TVIB.

Q4: Does it support IEPE accelerometers?A4: Primarily designed for proximity probes and velocity transducers. IEPE accelerometers require different vibration hardware.

Q5: Can it be hot swapped online?A5: Hot-swap is supported, but all vibration and keyphasor signals will be lost during replacement. Site MOC, alarm suppression and bypass procedures are mandatory.

Q6: Can it work on Mark VI (non-Vie)?A6: No, it is exclusive to Mark VIe IONet architecture; older Mark VI uses separate vibration hardware.

 

Installation & Configuration Guide

  1. Pre-install Preparation: Mark VIe I/O backplane, TVBA termination board, 24VDC rack power, proximity probe cables, ToolboxST software, site MOC/bypass plan.
  2. Rack Preparation: Bypass vibration alarms and related protection logic per plant safety procedure.
  3. Module Insertion: Insert into designated I/O pack slot and lock.
  4. Field Wiring: Connect probe cables to TVBA terminal board; separate low-level vibration wiring from high-power cables.
  5. Power Up: Energize rack power, confirm power and IONet link LEDs are normal.
  6. Online Connection: Connect ToolboxST to Mark VIe controller and go online.
  7. Hardware Scan: Run chassis scan, confirm PVIB pack is detected without hardware fault.
  8. Sensor Configuration: Assign channel type (proximity / velocity / keyphasor), probe calibration factors, alarm thresholds.
  9. Signal Validation: Check shaft vibration, thrust position and rotating speed live values; test keyphasor pulse capture.
  10. Backup: Save ControlST database, module firmware version and vibration alarm settings to plant archive.

Warning: This module feeds critical turbine vibration protection and machinery condition monitoring. Loss of PVIB signals may trigger turbine trip if alarms are not properly bypassed before replacement.

 

Related Mark VIe Vibration & I/O Models & Accessories (15 pcs)

Model Order Number Description
Updated Non-safety Vibration Pack IS420PVIBH1B Replacement for
SIL Safety Vibration Pack IS220YVIBS1A SIL rated vibration I/O pack
Safety Vibration Updated Version IS420YVIBS1B New SIL vibration pack
PVIB Terminal Board IS200TVBAH2A TVBA termination board for PVIB
Mark VIe Controller IS220UCSAH1A Mark VIe main controller
IONet Switch Module IS420ESWBH2A Mark VIe IONet Ethernet switch
Rack Power Supply IS200PSAH1A Mark VIe 24VDC power supply
Proximity Probe 330104-00-05-10-02-00 Bently 3300 series probe
Probe Extension Cable 330730-080-00-00 Probe extension cable
Keyphasor Sensor BENTLY 330105 Magnetic pickup keyphasor
IONet Patch Cable GE-CAB-IONET Mark VIe IONet Ethernet cable
Mark VIe Backplane IS200CHS02A I/O pack rack backplane
Analog Input Pack IS210AEAAH1B 4-20mA AI I/O pack
Digital Input Pack IS210AEDAH1B DI I/O pack
ToolboxST Software TOOLBOXST-LIC Mark VIe configuration & diagnostic software