Description
FANUC A06B-6097-H206 SVM2-60/60HV Alpha HV Dual Axis Servo Amplifier
Product Introduction
The FANUC A06B-6097-H206 is a dual-axis high-voltage Alpha servo amplifier (SVM2-60/60HV) for FANUC CNC systems. It belongs to the Alpha HV 400V servo drive family and communicates with the CNC controller via FSSB fiber-optic servo bus, delivering high-precision position, speed and torque control for two servo axes simultaneously. This amplifier receives DC bus power from a matching PSM power supply module and drives compatible αHV series servo motors. It features fast response current loop control, built-in overcurrent, overvoltage, overheat and encoder fault detection. Front-panel status LEDs and alarm codes simplify on-site troubleshooting. Widely installed on high-speed vertical machining centers, horizontal machining centers and CNC lathes. It is a legacy FANUC drive, commonly stocked as new surplus or fully tested refurbished spare for CNC machine maintenance and axis retrofit.

A06B-6097-H206
Specification Parameters
| Item | Specification |
|---|---|
| Brand | FANUC |
| Model | A06B-6097-H206, SVM2-60/60HV |
| Type | Dual-axis servo amplifier |
| Series | Alpha HV (400V class) |
| Communication | FSSB fiber optic interface |
| DC Bus Input | 566 ~ 651 VDC |
| Rated Output Current | 16.3 A per axis (L / M axis) |
| Max Output AC Voltage | 460 VAC |
| Power Rating | 12 kW total |
| Supported Motors | α12/3000HV, α22/2000HV, α30HV, α40HV |
| Cooling | Forced air cooling with heatsink |
| Protection | OV, UV, IOH, OHC, encoder loss, overload |
| Operating Temperature | 0 °C ~ +45 °C |
| Mounting | Cabinet rack mounting |
| Weight | Approx. 5.8 kg |
Application Scenarios
- Vertical machining centers (VMC)
- Horizontal machining centers (HMC)
- High-precision CNC lathes and turning centers
- Mold and die high-speed milling machines
- 5-axis CNC machining equipment
- Automotive component machining lines
- Tool room CNC machine overhaul
- Replacement spare for existing Alpha HV drive systems
Recommended 10 Related Models
- A06B-6097-H104 – SVM1-40HV single axis amplifier
- A06B-6097-H204 – SVM2-40/40HV dual axis amplifier
- A06B-6097-H208 – SVM2-80/80HV dual axis amplifier
- A06B-6087-H130 – PSM-30HV power supply module
- A06B-6087-H145 – PSM-45HV power supply module
- A06B-6087-H160 – PSM-60HV power supply module
- A06B-0247-B400 – α22/2000HV servo motor
- A06B-0243-B400 – α12/3000HV servo motor
- A06B-6096-H206 – Alpha dual axis low voltage servo amplifier
- A06B-6110-H011 – Alpha i power supply module
FAQ
Q1: What does SVM2-60/60HV mean? A1: SVM2 = dual-axis servo module; 60/60 means both axes are 60A frame rating; HV stands for 400V high voltage version.
Q2: Does this amplifier work standalone? A2: No. It must pair with a compatible Alpha HV PSM power supply module to provide DC bus. It cannot work without the PSM unit.
Q3: Can it drive standard 200V Alpha servo motors? A3: No. This is HV 400V class drive. It only matches αHV high-voltage servo motors; 200V Alpha motors require non-HV SVM amplifiers.
Q4: Is A06B-6097-H206 hot-swappable? A4: FANUC Alpha HV amplifiers are NOT hot-swap devices. The entire rack must be fully powered off and discharged before removal.
Q5: Is this model discontinued? A5: Yes, this Alpha HV generation is end-of-life. Available stock is new surplus or tested refurbished units for after-sales maintenance of old CNC machines.
Q6: What bus does it use to communicate with CNC? A6: It uses FSSB (FANUC Serial Servo Bus) fiber link, typical for 0i-B, 16i, 18i, 21i legacy CNC controllers.


