Description
ELAU PacDrive MAX-4/11/03/032/99/1/1/00 Servo Drive, Industrial Automation Spare Part
Product Core Overview
The MAX-4/11/03/032/99/1/1/00 is an ELAU (Schneider Electric) PacDrive MAX series high-performance servo drive, designed for coordinated multi-axis motion control systems. It works together with C400 / C600 PacDrive motion controllers over SERCOS bus, delivering precise torque, speed and position control for servo motors.This compact power drive unit is widely deployed in packaging, converting, printing and material processing machinery. It supports electronic gearing, flying shear, registration control and synchronised production cycles. The MAX series is manufacturer end-of-life, supplied as tested spare for legacy PacDrive automation lines, enabling fast replacement to minimise machine downtime.

Max-4/11/03/032/99/1/1/00
Main Technical Specifications
| Item | Specification |
|---|---|
| Brand | ELAU (Schneider Electric) |
| Model | MAX-4/11/03/032/99/1/1/00 |
| Series | PacDrive MAX Servo Drive |
| Product Type | Digital Servo Amplifier |
| Input Voltage | 3 × 400 VAC – 480 VAC, 50/60 Hz |
| Control Supply | 24 VDC (±10%) |
| Control Bus | SERCOS Interface |
| Motor Type | ELAU SH / SM series synchronous servo motors |
| Continuous Output Current | 3 A |
| Peak Output Current | 9 A |
| Cooling | Convection + fan assisted |
| Operation Temperature | 0 ℃ ~ +55 ℃ |
| Ambient Humidity | 5%–90% RH, non-condensing |
| Protection Rating | IP20 (cabinet installation only) |
| Mounting | DIN rail mounting |
| Integrated Functions | Position loop, speed loop, torque loop, brake control, safe stop |
| Protection | Overcurrent, overvoltage, undervoltage, over-temperature, motor short-circuit, earth fault |
| Application | Packaging machines, printing presses, converting lines, automated handling |
Quality Control Procedure
- Visual Incoming Inspection: Check housing, fan, power terminals, bus connector, label and serial number integrity.
- ESD Controlled Handling: All inspection and testing carried out on grounded ESD workstation with anti-static wrist strap.
- Power-on Burn-in Test: Energise control power and DC bus for 4 hours, monitor fan operation, status LEDs and temperature.
- SERCOS Communication Test: Connect to PacDrive controller, verify bus identification and drive address recognition.
- Power Stage Test: Run no-load excitation test, check PWM output and fault alarm behaviour.
- Parameter & Firmware Validation: Confirm firmware revision compatible with original machine project.
- Safety Circuit Check: Verify internal safe stop and brake control circuit function.
- Data Archiving: Record serial number and full test report, attach inspection label, vacuum anti-static packaging.
- Pre-shipment Audit: Double-check full model suffix, configuration code and quantity before dispatch.
Recommended Related Models & Order Codes (15pcs)
- MAX-4/11/03/032/99/1/2/00
- MAX-4/11/05/064/99/1/1/00
- MAX-4/11/08/096/99/1/1/00
- /11/12/128/99/1/1/00
- C400/A8/1/1/1/00
- C400/A6/1/1/1/00
- C600/A8/0/1/0/00
- MC-4/11/05/400
- MC-2/11/05/400
- SH100/40060/0/1/00
- SH30701P02A2000
- SM-070/10/0/0/00
- SM-100/10/0/0/00
- SCL055
- SCL100
Frequently Asked Questions
Q1: Can /11/03/032/99/1/1/00 replace /11/03/032/99/1/2/00 directly?A: Same power rating, only minor I/O configuration difference. Verify I/O mapping in PacDrive project before replacement.
Q2: Is this servo drive discontinued?A: Yes, ELAU PacDrive MAX series is end-of-life. Stock is original surplus or fully tested refurbished spare parts.
Q3: Does it support hot swap while machine is running?A: Hot swap is not permitted. Cut off both 24VDC control supply and three-phase main power, perform LOTO before replacement.
Q4: Drive reports SERCOS fault after installation, what should I check?A: Inspect SERCOS fibre cable, bus termination, drive address setting, controller project axis configuration and power status.
Q5: What is the warranty coverage?A: Original surplus new: 12-month warranty. Refurbished tested stock: 6-month warranty. Damage from wrong mains voltage, miswiring, ESD or firmware mismatch is excluded.
Q6: Which software is used for commissioning?A: Commissioning, parameter setting and diagnostics are completed via ELAU PacDrive Software (PDS). Original project backup is required.
Installation & Configuration Guide
Pre-installation Preparation
- Confirm cabinet environment: clean, low dust, no condensation, separate from high noise frequency devices.
- Prepare ESD protection, insulated torque screwdriver, SERCOS fibre cable, PacDrive software and the original machine project file.
- Back up controller project and axis parameters before removing the faulty drive.
Installation Steps
- Follow LOTO procedure, isolate 400VAC main power and 24VDC control supply.
- Release DIN rail latch, disconnect power, motor, brake and SERCOS cables, remove faulty drive.
- Unpack new spare under ESD protection; avoid touching power board components.
- Mount the servo drive firmly on DIN rail and lock the latch.
- Wire mains input, DC bus, motor cable, brake cable, 24V control and SERCOS bus strictly per wiring diagram. Separate power cables from signal cables.
- Tighten terminals to specified torque, check shielding grounding.
Configuration & Commissioning
- Restore 24VDC control supply first, check LED status; then enable main power.
- Open PacDrive Software and connect to the PacDrive motion controller.
- Scan SERCOS network, confirm the new drive is detected online.
- Load or verify motor parameter set, encoder type and safety stop configuration.
- Run manual jog test, check rotation direction, encoder feedback and emergency stop function.
- Test electronic cam, synchronisation and flying shear functions under manual mode.
- Clear all alarms after system self-diagnosis passes.
- Switch machine back to automatic mode and save commissioning record.
Maintenance Notes
- Keep fan and ventilation slots free of dust; dust accumulation causes over-temperature trips.
- Do not open the drive casing; unauthorised disassembly voids warranty.
- Store spare drives in dry anti-static packaging, avoid heavy vibration and temperature fluctuation.


