Description
ELAU PacDrive C400/A8/1/1/1/00 Motion Controller, Industrial Automation Spare Part
Product Core Overview
The C400/A8/1/1/1/00 is an ELAU (Schneider Electric) PacDrive C400 A8 high-performance integrated motion controller, widely adopted in packaging machinery, printing lines, material handling and multi-axis servo automation equipment. It combines PLC logic control and real-time motion control on one unit, supporting synchronized control for up to 8 servo axes via SERCOS interface.Running VxWorks real-time OS, this controller executes electronic cam, flying shear, registration and multi-axis interpolation functions. It features onboard digital & analog I/O, diagnostic display panel and rich fieldbus interfaces. The unit is factory-discontinued, commonly stocked as maintenance spare for legacy PacDrive automation systems, supporting fast replacement to reduce production downtime.

Main Technical Specifications
| Item | Specification |
|---|---|
| Brand | ELAU (Schneider Electric) |
| Model | C400/A8/1/1/1/00 |
| Series | PacDrive C400 |
| Product Type | Multi-axis Motion Controller |
| Processor | Intel Celeron M 600 MHz |
| Memory | 256 MB RAM, 32 MB Flash |
| Operating System | VxWorks Real-Time OS |
| Programming Standard | IEC 61131-3 (LD, FBD, ST, SFC, CFC, IL) |
| Max Controlled Axes | 8 axes via SERCOS bus |
| Supply Voltage | 24 VDC (20–33 VDC tolerance) |
| Communication | SERCOS, Ethernet TCP/IP, RS232/RS485, optional PROFIBUS / CANopen |
| Operation Temp. | 0 ℃ ~ +55 ℃ |
| Ambient Humidity | 5%–90% RH, non-condensing |
| Protection Rating | IP20 (cabinet internal mounting) |
| Mounting | DIN rail / panel mounting |
| Integrated Functions | Electronic cam, flying saw, position registration, touch probe, PLC interlock |
| Protection | Overvoltage, undervoltage, over-temperature, watchdog fault protection |
| Application | Packaging, printing, converting, textile, automated handling lines |
Quality Control Procedure
- Visual Incoming Inspection: Check casing, display panel, terminal connectors, PCB condition, label and serial number integrity.
- ESD Controlled Handling: All inspection and testing performed on grounded anti-static workstation with ESD wrist strap.
- Power-on Burn-in Test: Continuous energized ageing at rated 24VDC for 4 hours; monitor display, fan and status LED.
- Communication & Functional Test: Connect to SERCOS servo network, verify bus scan, axis identification and basic motion command response.
- Firmware Validation: Confirm firmware revision matches the original project software version.
- I/O Channel Test: Force digital input / output and analog channels to validate signal acquisition and output.
- Data Archiving: Record SN and full test report, attach inspection sticker, pack in vacuum anti-static bag.
- Pre-shipment Audit: Double verify model code, configuration suffix and quantity before shipment.
Recommended Related Models & Order Codes (15pcs)
- C400/10/1/1/1/00
- C400/A6/1/1/1/00
- C400/A4/1/1/1/00
- C600/10/0/1/0/00
- C600/A8/0/1/0/00
- SM-100/10/0/0/00
- SM-070/10/0/0/00
- SH30701P02A2000
- SH100/40060/0/1/00
- MC-4/11/05/400
- MC-2/11/05/400
- C400/A8/2/1/1/00
- C400/A8/1/2/1/00
- SCL055
- SCL100
Frequently Asked Questions
Q1: Is /A8/1/1/1/00 interchangeable with /10/1/1/1/00?A: They belong to PacDrive family. Hardware form factor is similar, but axis capacity and firmware are different. Full project backup and software version matching are mandatory before replacement.
Q2: Is this unit discontinued by manufacturer?A: Yes, ELAU PacDrive series is end-of-life. Available supply is surplus original stock or tested refurbished spare parts.
Q3: Can I hot swap this motion controller during running?A: Hot swap is NOT supported. Power off the 24VDC supply and lock out the whole control rack before removal and replacement.
Q4: Display shows SERCOS bus fault after installation, what to check?A: Inspect SERCOS fiber cable / bus wiring, terminal termination resistor, servo drive power status, and confirm axis configuration in PacDrive software.
Q5: What is the warranty policy?A: Original surplus new: 12-month warranty. Refurbished tested stock: 6-month warranty. Damage caused by wrong voltage, ESD, miswiring or firmware mismatch is excluded.
Q6: Which software is used for programming and commissioning?A: It is configured via ELAU PacDrive Software (PDS). Project backup must be kept for replacement commissioning.
Installation & Configuration Guide
Pre-installation Preparation
- Confirm cabinet environment: clean, dust-free, no condensation, away from high-power frequency converters and high-voltage cables.
- Prepare ESD protection tools, insulated screwdriver, 24VDC power supply, SERCOS communication cable and PacDrive software with original project file.
- Complete full backup of the running project and axis parameters before removing the existing controller.
Installation Steps
- Execute LOTO lockout-tagout procedure; cut off 24VDC control power and servo main power.
- Release DIN rail latch, extract the old controller steadily.
- Take the new spare out of anti-static package only with ESD protection; avoid touching internal PCB and connectors.
- Mount the unit firmly on DIN rail, lock the fixing latch.
- Wire 24VDC power, digital/analog I/O terminals, SERCOS bus and Ethernet port strictly following wiring diagram. Separate signal cables from power cables.
- Double-check wiring terminal torque and shielding grounding.
Configuration & Commissioning
- Power on the 24VDC control supply, observe front panel display and status indicators.
- Launch PacDrive Software, establish Ethernet connection to the controller.
- Upload or download the validated matching project file.
- Scan SERCOS network, confirm all connected servo axes are detected online without bus alarms.
- Run single-axis jog test to verify direction, encoder feedback and limit switch function.
- Test cam curves, flying shear and synchronous motion functions under manual mode.
- Clear all residual alarms after system self-diagnosis passes.
- Switch machine back to automatic production mode and save the commissioning log.
Maintenance Notes
- Keep internal fan and ventilation slots clean; dust accumulation will trigger over-temperature alarm.
- Do not open the metal casing; unauthorized disassembly voids warranty.
- Store spare controller in dry anti-static packaging, avoid vibration and temperature cycling.
