Description
DS200VPBLG2A Product Introduction
Overview
The DS200VPBLG2A (VPBL) is a dedicated VME backplane / interconnect board manufactured by General Electric for the LS2100 LCI static starter control platform under the Speedtronic Mark V turbine control ecosystem. It serves as the central expansion carrier inside the static starter rack, routing VME bus signals, exciter feedback, and system power between the DSPC processor board, gate distribution boards, exciter interface, and I/O extender daughtercards. This board resolves wiring and space limitations of standard VME slots, consolidating critical starter control interconnections for gas turbine and generator startup systems.

DS200VPBLG2A
Key Features & Benefits
- 8 VME expansion connectors: six double-wide slots plus two single-wide slots, supporting DSPC, gate status distribution, exciter, and I/O extender modules
- Dedicated 34‑pin EXJV ribbon exciter connector for clean transmission of exciter bridge signals
- Isolated digital (DCOMI) and analog (COMI) ground domains to suppress ground loops and EMI noise in turbine hall environments
- 12‑pin Mate‑N‑Lock JAA power connector together with ten power bugs for reliable mating to the P1 backplane
- Rugged industrial PCB coating, designed for continuous operation in power generation static starter cabinets
- Optimized layout for LS2100 static starter sequencing and thyristor gating control
- Fully documented with GE service manual GEI‑100227 for pinout, wiring and troubleshooting
Technical Specifications
| Item | Description |
|---|---|
| Manufacturer | General Electric (GE Vernova) |
| Model | DS200VPBLG2A |
| Functional Name | VPBL VME Backplane Board |
| Compatible System | LS2100 LCI Static Starter, Mark V Speedtronic |
| VME Connectors | 8 total (6 double‑wide, 2 single‑wide) |
| Exciter Port | 34‑pin ribbon header (EXJV) |
| Power Connector | 12‑pin Mate‑N‑Lock (JAA) |
| Backplane Interface | 10 power bugs for P1 backplane connection |
| Grounding | Separated analog and digital grounds |
| Operating Temperature | 0°C ~ 55°C |
| Weight | Approx. 0.5 kg |
| Application | Turbine static starter control, LCI load commutated inverter |
Typical Applications
This board is deployed on gas turbine combined‑cycle power plants where LS2100 static starters are used to accelerate the generator or gas turbine rotor before ignition and synchronization. It is a core spare for outage maintenance, rack retrofits and replacement of aged LS2100 control assemblies. It does not run control logic itself; it is the passive high‑integrity interconnect backbone for the static starter control set.
Matching Companion Boards
- DS200DSPC – DSP host processor board
- DS200ADMAH1A – Analog multiplexer daughterboard (your prior item)
- Gate distribution status boards for thyristor firing
- LS2100 exciter interface boards
Operation Notes
Installation strictly follows GE wiring diagrams. Verify ribbon keying, power bug seating and ground isolation before energizing. Improper exciter wiring through VPBL can cause starter firing faults and hardware damage.
FAQ
Q: Can DS200VPBLG2A work outside static starter racks? A: It is a purpose‑built backplane for VME group J2 assembly, not a generic VME backplane for other PLC or DCS platforms.
Q: Difference between VPBL revision A and G2A? A: Suffix revisions denote PCB layout and component change updates; physical form factor is similar, but cross‑replacement must be validated against your existing rack BOM and firmware.

