DS200ADMAH1A Product Introduction

  • DS200DSPC – Digital Signal Processor host board
  • DS200SDCIG – DC instrumentation & interface board
  • DS200SHVMG – High voltage interface board
  • DS200TCQBG – Thermocouple input board
Category: SKU: DS200ADMAH1A Brand:

Description

DS200ADMAH1A Product Introduction

 

Overview

The DS200ADMAH1A is an Analog-to-Digital Multiplexer Daughterboard (ADMA) manufactured by General Electric for the GE Speedtronic™ Mark V / LS2100 static starter turbine control platform. It functions as a critical signal conditioning and conversion interface, mounted as a daughter board paired with the DS200DSPC digital signal processor board inside the VME rack. This module buffers, filters, multiplexes and converts field analog and discrete signals into digital data for the main control processor, enabling high-fidelity monitoring and closed-loop regulation for gas turbines, steam turbines and static starter drive systems.

DS200ADMAH1A

Key Features & Benefits

  • High-precision analog signal acquisition with 12-bit conversion resolution, supporting common industrial process signal types including 4–20 mA, 0–10 VDC, ±10 VDC and millivolt inputs
  • Integrated signal filtering and surge suppression to minimize noise interference in high-vibration, high-EMI turbine hall environments
  • Built-in channel isolation design, improving signal integrity and protecting core control hardware from ground loop damage
  • Onboard diagnostic status LEDs: IMOK for healthy status and FAIL for fault alarm, supporting quick on-site troubleshooting
  • Compact daughterboard form factor for direct stacking on the DSPC board, optimizing rack space inside the Mark V control assembly
  • Rugged industrial-grade PCB construction, engineered for continuous long-run operation in power generation assets
  • Seamless interoperability with native Mark V system firmware and peripheral board sets

 

Technical Specifications

 

Item Description
Manufacturer General Electric (GE Vernova)
Model DS200ADMAH1A
Type Analog-to-Digital Multiplexer Daughterboard
Compatible System Speedtronic™ Mark V, LS2100 Static Starter Control
Analog Inputs 3 primary analog inputs, expandable up to 12 multiplexed channels
Analog Outputs 4 analog outputs, ±10 VDC, 12-bit resolution
Digital I/O 8 discrete I/O ports managed by EPLD logic
Connectors XA (60-pin), XB (40-pin), TBPL 60-pin ribbon header
Status Indicators IMOK (Green), FAIL (Red)
Mounting Stacked underneath DS200DSPC DSP board within VME rack
Operating Temperature 0°C ~ 55°C
Application Turbine control, static starter drive monitoring, process signal acquisition

 

Typical Applications

The DS200ADMAH1A is widely deployed in power generation facilities, serving gas turbine, steam turbine and combined-cycle units. It collects critical process variables such as temperature, pressure, flow and drive feedback signals, feeding accurate measurements back to the Mark V controller for fuel scheduling, speed regulation and protection logic execution. It is a common spare part for legacy GE turbine control retrofits, maintenance and outage replacement projects.

 

Complementary Replacement Options

  • DS200DSPC – Digital Signal Processor host board
  • DS200SDCIG – DC instrumentation & interface board
  • DS200SHVMG – High voltage interface board
  • DS200TCQBG – Thermocouple input board

 

Operation Notes

Installation must follow GE Mark V service manuals. Verify ribbon cable orientation and backplane power before power-up. Periodic calibration and contact resistance inspection are recommended for sites with heavy cyclic operation.

 

FAQ

Q: Is DS200ADMAH1A interchangeable with DS200ADMAH1AAC? A: The suffix variant denotes factory revision and component revision; cross-compatibility shall be confirmed against your existing Mark V part list and firmware revision before swap.

Q: Can this board work outside Mark V / LS2100 systems? A: It is a dedicated daughtercard designed for the DS200DSPC host and Mark V architecture, not for standalone PLC or generic DCS use.