Description
DO880 Product Introduction
Overview
The DO880 (3BSE028602R1) is an ABB S800 I/O high-integrity digital output module for System 800xA DCS. It is SIL3 certified for safety-related control, supporting simplex or redundant rack configuration, used to drive 24VDC field actuators, trip solenoids, relay coils and dampers in power plant and chemical SIS/DCS racksABB.

DO880
Key Features & Benefits
- 16-channel 24VDC sourcing digital outputs, 0.5A per channel
- SIL3 safety certification to IEC 61508, suitable for safety interlock and trip circuits
- Group galvanic isolation between Modulebus backplane and field side
- Built-in short-circuit, over-temperature current limiting; inductive load freewheeling protection
- Loop supervision diagnostics: open load / short-circuit detection, no need to pulse outputs for diagnosis
- Supports redundant I/O configuration for high-availability systems
- Hot-swappable in S800 rack
- Front LED indicators for module health and each channel status
- Conformal coated PCB option, good EMC performance for power plant cabinet environments
- Compatible with high integrity controllers PM857, PM858, PM862, PM863, PM867, PM866A, PM891ABB
Technical Specifications
| Item | Description |
|---|---|
| Manufacturer | ABB |
| Model | DO880 |
| Part No. | 3BSE028602R1 |
| Series | S800 I/O / System 800xA |
| Type | High Integrity Digital Output Module (SIL3) |
| Channels | 16 DO, 24VDC sourcing |
| Rated Current | 0.5A per channel |
| Safety Level | SIL3 |
| Terminal Unit | TU810 / TU812 / TU814 / TU830 / TU833 / TU842 / TU843 / TU852 |
| Communication | S800 Modulebus |
| Engineering Software | Control Builder M |
| Operating Temp | -20°C ~ +70°C |
| OEM Status | Mature safety I/O module, spare supply available |
| Application | Power plant boiler/turbine interlock, ESD, chemical safety instrumented system |
Typical Applications
DO880 is widely deployed in ABB 800xA DCS and SIS racks for thermal power, combined-cycle and refinery projects. It executes trip signals, solenoid valve control, auxiliary motor start/stop and damper sequence commands. It is a critical spare for safety I/O rack overhaul and planned outages.
Matching Companion Items
- S800 terminal unit TU810 / TU812
- PM866 / PM891 800xA controller
- DI880 high integrity digital input module
- S800 rack, power supply and Modulebus terminator
- Control Builder M engineering software
Operation Notes
Confirm hardware PR revision before replacement; G revision supports degraded mode for normally energized safety channels. Must match SIL safety manual and proof-test requirements when used for SIS. It cannot be used without a TU terminal assembly.
FAQ
Q: What is the difference between DO880 and DOS880? A: DO880 belongs to I/O; DOS880 is Select I/O SIL3 DO module, different rack architecture, not interchangeable. Q: Can replace the ABB Symphony 216DB61 (HESG324063R100/G)? A: No, different DCS platform (800xA vs Symphony INFI90). Q: Can it communicate with Honeywell Experion or DeltaV? A: Signal exchange is available via hardwire or gateway, no native backplane compatibility.
