B&R X20CP1585 X20 System PLC CPU Controller Module

Category: SKU: B&R X20CP1585 X20 Brand:

Description

B&R X20CP1585 X20 System PLC CPU Controller Module

 

Product Introduction

The B&R X20CP1585 is a high-performance fanless CPU for the B&R X20 distributed I/O control system. It is built on Intel Atom 1 GHz processor with 256 MB DDR2 SDRAM and 1 MB battery-backed SRAM. This controller integrates native Gigabit Ethernet, POWERLINK V1/V2 real-time bus, RS232 serial port and dual USB ports, plus one expansion slot for optional communication interface modules. It uses removable CompactFlash card for application program storage and connects to X20 I/O modules via the X2X Link backplane bus. POWERLINK supports PRC (Poll Response Chaining) for ultra-low-jitter synchronized motion control with ACOPOS servo drives. It is programmed via B&R Automation Studio, supporting mapp technology, OPC UA, alarm logging and data acquisition. It carries ATEX Zone 2, DNV, ABS marine certifications and is widely used for machinery, packaging, plastics and process automation.

X20CP1585

Specification Parameters

Item Specification
Brand B&R (Bernecker + Rainer)
Model X20CP1585
Processor Intel Atom 1 GHz, fanless
Memory 256 MB DDR2 SDRAM, 1 MB battery SRAM
Program Storage CompactFlash card (sold separately)
Interfaces 1× Gigabit Ethernet, 1× POWERLINK V1/V2, 1× RS232, 2× USB, 1× X2X Link
Expansion 1 slot for optional communication module
Supply 24 VDC (-15% ~ +20%)
Power Consumption Approx. 8.2 W
Mounting DIN rail
Dimension 150 × 99 × 85 mm
Weight Approx. 400 g
Operating Temp -25 °C ~ +60 °C (horizontal mounting)
Certifications CE, UL, ATEX Zone2, DNV, ABS, LR, EAC
Software Automation Studio
Safety Reverse polarity protection, module status LEDs

 

Application Scenarios

  • Packaging and cartoning automation lines
  • Plastics injection, extrusion and blow molding machines
  • Textile winding and weaving equipment
  • CNC machine and multi-axis motion control
  • Material handling and sorting systems
  • Food & beverage process machinery
  • Marine and offshore skid control cabinets
  • Retrofit and spare replacement for existing X20 systems

 

Recommended 10 Related Models

  1. X20CP1584 – Lower performance X20 CPU
  2. X20CP1583 – Entry-level Atom CPU
  3. X20CP3585 – High-end performance CPU
  4. X20IF1061 – Ethernet/IP interface module
  5. X20IF1072 – Modbus RTU interface
  6. X20IF1082 – CANopen interface
  7. X20BC0083 – X2X bus controller
  8. X20PS9400 – X20 power supply module
  9. X20CM0985 – CompactFlash memory card
  10. X20AC0SR1 – X20 end cover plate

 

FAQ

Q1: What is the difference between X20CP1585 and X20CP3585? A1: X20CP3585 is the higher-performance version with larger memory and enhanced processing capacity for complex motion and heavy communication loads; X20CP1585 is the mid-range model.

Q2: Does it come with CompactFlash card? A2: No. CompactFlash for application storage must be purchased separately.

Q3: Can X20CP1585 run POWERLINK master? A3: Yes, it can operate as POWERLINK managing node (master) or controlled node, supporting PRC for high-speed synchronized motion with ACOPOS drives.

Q4: Is it hot-swappable? A4: Yes, the X20 system supports hot swap of CPU and I/O modules on X2X Link backplane under proper maintenance procedures.

Q5: Is still available for new orders? A5: It is a mature legacy CPU. Some revisions have been phased out. Available stock is new surplus or fully tested refurbished spare parts.

Q6: Does it support controller redundancy? A6: itself does not support native CPU redundancy. If redundant control is required, select other B&R redundant system architectures.