ABB CI853 Dual RS232 Serial Communication Interface Module for AC 800M (3BSE018103R1, CI853K01)

  1. CI854BK01 – PROFIBUS DP-V1 communication interface
  2. CI855 – MasterBus 300 communication module
  3. CI856 – S100 I/O bus interface
  4. CI867 – Modbus TCP Ethernet interface
  5. CI868 – IEC 61850 communication module
  6. CI871 – EtherNet/IP interface module
  7. TP853 – Matching baseplate for CI853
  8. TP854 – Baseplate for CI854 series
  9. BC810 – CEX bus redundancy module
  10. PM866 – AC800M redundant processor unit
Category: SKU: ABB CI853 Brand:

Description

ABB CI853 Dual RS232 Serial Communication Interface Module for AC 800M (3BSE018103R1, CI853K01)

 

Product Introduction

The ABB CI853 is a dual-channel serial communication interface for the ABB AC 800M controller under System 800xA DCS platform. It is equipped with two RS232-C ports, supporting Modbus RTU and ABB COMLI protocols, and also compatible with 3964R and custom user serial protocols. CI853 runs Modbus RTU in master mode, while COMLI supports both master and slave modes for interconnection with legacy ABB controllers and third-party serial instruments. It must be paired with TP853 baseplate and supports hot-swap operation. Since the native port is RS232, an external converter is required for RS485 multi-drop bus connection. Configured via Compact Control Builder, front LEDs provide communication status and fault diagnosis. This module is widely used to integrate older serial transmitters, meters, drives and legacy controllers into the 800xA control system, and it remains a critical spare for retrofitting and maintenance of existing AC 800M racks.

ABB CI853

Specification Parameters

Item Specification
Brand ABB
Model CI853K01, Part No: 3BSE018103R1
Platform AC 800M, System 800xA
Interface Dual RS232-C DB9 ports
Supported Protocols Modbus RTU (Master), COMLI (Master/Slave), 3964R, custom serial protocols
Baud Rate 75 bps ~ 19200 bps
Baseplate TP853 (included in complete set)
Hot Swap Supported
Redundancy No module redundancy, no bus line redundancy
Configuration Software Compact Control Builder
Indicators Front-panel status LEDs for communication and fault
Operating Temperature 0 °C ~ +60 °C
Humidity 5%–95% non-condensing
Certifications CE, RoHS
Dimension 59 × 185 × 127.5 mm
Weight Approx. 0.7 kg (module + baseplate)

 

Application Scenarios

  • Petrochemical plant DCS connection with Modbus RTU transmitters and analysers
  • Power plant integration of legacy serial meters and protection relays
  • Pulp & paper factory old controller intercommunication via COMLI
  • Water treatment serial instrument data acquisition
  • Cement, mining and metal industry Modbus RTU variable frequency drives
  • ABB Advant legacy system migration and data exchange
  • Building energy monitoring serial sensor collection
  • System retrofit and spare replacement for existing AC800M 800xA racks

 

Recommended 10 Related Models

  1. CI854BK01 – PROFIBUS DP-V1 communication interface
  2. CI855 – MasterBus 300 communication module
  3. CI856 – S100 I/O bus interface
  4. CI867 – Modbus TCP Ethernet interface
  5. CI868 – IEC 61850 communication module
  6. CI871 – EtherNet/IP interface module
  7. TP853 – Matching baseplate for CI853
  8. TP854 – Baseplate for CI854 series
  9. BC810 – CEX bus redundancy module
  10. PM866 – AC800M redundant processor unit

 

FAQ

Q1: Does CI853 have native RS485 port? A1: No, CI853 is RS232 only. An external RS232 to RS485 converter is required if connecting to multi-drop Modbus RTU bus.

Q2: Can work as Modbus RTU slave? A2: only supports Modbus RTU master mode. It can run COMLI as master or slave. If Modbus slave function is needed, use CPU built-in serial port or CI867.

Q3: Is hot-swappable? A3: Yes, hot swap is supported when installed on TP853 baseplate inside a standard AC800M rack. Follow maintenance procedure to avoid unexpected alarms.

Q4: Does support module redundancy? A4: No, itself does not support redundant configuration. If redundant serial communication is required, design separate bus architecture or select other communication modules.

Q5: Is still in active production? A5: It is a legacy serial communication module. New original production has been phased out. Available stock is new surplus or fully tested refurbished spare parts for system maintenance.

Q6: What is COMLI protocol used for? A6: COMLI is ABB proprietary serial protocol mainly for data exchange between old ABB Advant controllers. It is widely used for legacy system interlock and data bridging.