ABB 3BSE018741R30 (PFTL 101/201/PFCL 201 Cable, 30 m)

  • 3BSE018741R10: 10 m
  • 3BSE018741R20: 20 m
  • 3BSE018741R30: 30 m (this item)
  • 3BSE018741R50: 50 m
  • Matching load cell: PFTL101A 2kN (3BSE004172R1)
  • Matching amplifier: PFEA111‑65 (3BSE050090R65)
Category: SKU: ABB 3BSE018741R30 Brand:

Description

ABB 3BSE018741R30 (PFTL 101/201/PFCL 201 Cable, 30 m)

 

Product Introduction

The 3BSE018741R30 is a factory-terminated, shielded signal cable assembly with pre-fitted male connector for ABB Pressductor® magneto‑elastic tension load cells. It transmits the 330 Hz AC excitation supply and low-level tension measurement signal between PFTL / PFCL load cells and PFEA series tension electronics, forming a complete closed-loop tension sensing system for web processing machinery.

This 30-metre variant is the most widely selected length for typical machine-frame layouts. Its multi-layer shielding is engineered specifically for the weak Pressductor sensor signal, suppressing EMI interference generated by nearby variable frequency drives and high-power motors. Factory termination eliminates on-site soldering, crimping and wiring errors, ensuring consistent signal performance after direct replacement. It is a matched spare accessory for the PFTL101A 2kN load cell and PFEA111‑65 tension amplifier we covered earlier.

3BSE018741R30

Key Technical Specifications

Item Specification
Part Number 3BSE018741R30
ABB Type PFTL 101/201/PFCL 201 Cable, 30 m
Description Signal cable with male plug connector
Compatible Load Cells PFTL101A, PFTL201, PFCL201 Pressductor tension transducers
Compatible Amplifiers PFEA111‑65, PFEA112‑65, PFEA113‑65
Cable Length 30 m
Construction Multi-core, individually shielded plus overall shield
Signal Interface 330 Hz AC excitation + low-level tension feedback signal
Outer Jacket Abrasion and oil-resistant industrial grade
Origin Sweden / Poland
Gross Weight ~5 kg
HS Code 85389091
MOQ 1 piece

 

Main Features & Advantages

  1. Original ABB pre-terminated assembly: Plug-and-play installation, reduces commissioning time and wiring faults.
  2. High-performance shielding architecture: Preserves tiny magneto‑elastic sensor signals and rejects drive noise.
  3. System-calibrated impedance: No recalibration required after swapping; maintains tension reading accuracy.
  4. Robust mechanical construction: Tolerates continuous vibration, dust, oil mist and humidity in mill environments.
  5. Standard stocking spare: 30 m is the mainstream length for most unwinder / rewinder tension stands.
  6. Full ecosystem compatibility: Works seamlessly across the entire ABB Pressductor tension control family.

 

Product History & Lifecycle

This cable family was released together with the PFTL101 pillow-block load cell series and PFEA11x tension electronics as a system accessory package. ABB supplies this cable in a range of fixed lengths, with the suffix R30 representing the 30 m version.

As a passive signal accessory, it remains an active spare for the global installed base of web tension control lines. Degraded cable shielding or damaged connectors are common root causes of unstable, drifting tension readings, making this assembly a frequently ordered replacement part during mill maintenance outages. It is not a new-design component and is intended for lifecycle support and retrofit only.

 

Typical Applications

  • Paper, board and tissue machine tension sections
  • BOPP film, plastic film and flexible foil converting lines
  • Steel, aluminium and copper strip processing
  • Textile, fibre, wire and cable extrusion equipment
  • Printing, slitter and rewinder machinery

 

Cross Reference (Other Length Options)

  • 3BSE018741R10: 10 m
  • 3BSE018741R20: 20 m
  • 3BSE018741R30: 30 m (this item)
  • 3BSE018741R50: 50 m
  • Matching load cell: PFTL101A 2kN (3BSE004172R1)
  • Matching amplifier: PFEA111‑65 (3BSE050090R65)