Description
6SL3320-1TE36-1AA3 Product Introduction
Overview
The 6SL3320-1TE36-1AA3 is a Siemens SINAMICS S120 Chassis-type Single Motor Module. It is the inverter power unit of the modular S120 high-performance drive system, converting stable DC bus power into variable-frequency three-phase AC output for speed and torque control of synchronous or asynchronous motors. This unit adopts internal air cooling, supports Safety Integrated functions, and communicates via the proprietary Drive-CLiQ bus with S120 CU control units. It is an active production model and widely supplied as new original, surplus or refurbished spare for large drive cabinet maintenance.

6SL3320-1TE36-1AA3
Key Features & Benefits
- 315 kW power rating, 605 A rated output current for heavy-duty variable speed applications
- DC bus input range: 510–720 V DC; 0–480 V three-phase AC variable output
- Internal forced air cooling design, IP00 open chassis construction for cabinet installation
- Drive-CLiQ high-speed serial interface for connection with control unit, encoders and other S120 modules
- Supports Siemens Safety Integrated (STO, SS1, SLS etc.) safety functions
- Built-in IGBT power stage, overcurrent, overvoltage, overtemperature, short-circuit protection
- High dynamic performance for servo, high-precision speed and torque regulation
- Modular architecture, matched with Active Line Module (ALM) / Basic Line Module (BLM) rectifier units
- Diagnostics via STARTER / Startdrive engineering software, fault logging and waveform trace
- Suitable for continuous heavy-load operation in power, metallurgy, pulp & paper and water treatment plants
Technical Specifications
| Item | Description |
|---|---|
| Manufacturer | Siemens |
| Model | 6SL3320-1TE36-1AA3 |
| Type | SINAMICS S120 Single Motor Module |
| DC Input | 510 ~ 720 VDC |
| AC Output | 0 ~ 480 V, 3-phase AC |
| Rated Output Current | 605 A |
| Rated Power | 315 kW |
| Cooling | Internal air cooling |
| Protection Class | IP00 (chassis type, install inside control cabinet) |
| Communication | Drive-CLiQ |
| Supported Safety | Safety Integrated functions |
| Engineering Software | STARTER, Startdrive, TIA Portal |
| OEM Status | Active product |
| Application | Large pump, fan, compressor, extruder, test stand, auxiliary motor drives |
Typical Applications
This S120 motor module is commonly used for high-power variable-speed drives in combined-cycle power plant auxiliary systems, refineries, chemical plants and heavy industry. Typical loads include boiler feed pumps, large induced draft fans, compressors and process main drives. It is a critical spare for drive cabinet overhaul, power module failure replacement and planned outage maintenance of drive systems.
Matching Companion Modules
- CU320-2 / CU310-2 control units
- Active Line Module / Basic Line Module rectifier
- Drive-CLiQ cables, motor encoders, output reactors / sine-wave filters
- SINAMICS terminal modules and brake modules
Operation Notes
This is only the power inverter unit; it cannot run independently and must be paired with an control unit and rectifier module. Verify DC bus voltage, motor nameplate parameters and encoder type before commissioning. Configure safety functions and perform acceptance testing if Safety Integrated is enabled. Check cooling air path and dust accumulation periodically for long-term reliability.
FAQ
Q: Can 6SL3320-1TE36-1AA3 work standalone? A: No. It requires control unit and rectifier unit as part of the complete drive system.
Q: Is it compatible with DeltaV / Honeywell Experion DCS? A: It can communicate via Profinet / Profibus with DCS, but it is not a native DCS I/O module.
Q: Can it be used for spindle or servo motion control? A: Yes, when paired with suitable CU control unit and servo motor encoder, it supports high-performance motion control.

