VE4005S2B1 Product Introduction

  • M‑Series I/O carrier and termination base KJ4001X1‑CA1
  • VE4003S2B1 (8‑ch HART AI, your prior item)
  • VE4003S6B1 (8‑ch RTD input module)
  • VE4001S2T2B4 (S‑Series discrete input module)
  • DeltaV controllers and EIOC interface assemblies

 

Category: SKU: VE4005S2B1 Brand:

Description

VE4005S2B1 Product Introduction

 

Overview

The VE4005S2B1 (alternate part number KJ3221X1-BA1) is an Emerson DeltaV M‑Series Series 2, 8‑channel isolated HART analog output module. It converts digital control commands from the DeltaV controller into precision 4–20 mA analog signals to drive field final control elements. Built‑in transparent HART communication enables bidirectional access for valve positioner diagnostics, calibration and secondary variable retrieval. This legacy M‑Series I/O card is OEM end‑of‑life and commonly supplied as surplus or refurbished spare for outage maintenance and lifecycle extension of existing DeltaV DCS installations.

VE4005S2B1

Key Features & Benefits

  • 8 isolated analog output channels, standard 4–20 mA control signal with 16‑bit high resolution
  • Native HART protocol support for smart valve positioners and HART actuators
  • Channel‑to‑channel and channel‑to‑backplane galvanic isolation to mitigate ground loops and EMI interference
  • Per‑channel fault diagnostics and LED status indication for open circuit, short circuit and out‑of‑range alarms
  • Hot‑swap capable on matching M‑Series carrier without shutting down the control rack
  • Supports simplex or redundant I/O pairing for critical regulatory control loops
  • Conformal coated PCB, compliant with ISA G3 corrosion specification for harsh cabinet environments
  • Fully configurable, calibrated and diagnosed via DeltaV Explorer software
  • Excellent output stability and low drift for continuous closed‑loop process regulation

 

Technical Specifications

Item Description
Manufacturer Emerson
Model VE4005S2B1
Alternate PN KJ3221X1-BA1
Type 8‑Channel HART Analog Output Module
Compatible System DeltaV DCS M‑Series Traditional I/O
Field Signal 4–20 mA, HART
Resolution 16‑bit
Accuracy ±0.1% of full span (typical)
Isolation 1500 VDC channel‑to‑channel / channel‑to‑backplane
Mounting M‑Series I/O Carrier & termination base KJ4001X1‑CA1
Operating Temperature -40°C ~ +70°C
OEM Status Discontinued, available as surplus / refurbished spare
Application Power generation, refinery, chemical, oil & gas regulatory control

 

Typical Applications

VE4005S2B1 outputs modulating signals to control valves, I/P converters, variable speed drives and actuators in DeltaV control systems. It is widely deployed in combined‑cycle power plants, refineries and chemical facilities for fuel flow, steam pressure, level and temperature closed‑loop control. It is a high‑demand spare for planned outages and obsolescence refresh of legacy M‑Series I/O racks.

 

Matching Companion Modules

  • M‑Series I/O carrier and termination base KJ4001X1‑CA1
  • VE4003S2B1 (8‑ch HART AI, your prior item)
  • VE4003S6B1 (8‑ch RTD input module)
  • VE4001S2T2B4 (S‑Series discrete input module)
  • DeltaV controllers and EIOC interface assemblies

 

Operation Notes

This is an M‑Series Series 2 module and not mechanically compatible with S‑Series I/O carriers. Verify carrier hardware, DeltaV firmware revision and termination wiring before replacement. After installation, download the control configuration and validate each channel output, HART communication and fault detection functions per Emerson service documentation.

 

FAQ

Q: Can VE4005S2B1 replace VE4003S2B1 directly? A: No. VE4003S2B1 is analog input (AI) for transmitters, VE4005S2B1 is analog output (AO) for control valves. Front‑end circuits are different and cannot be cross‑swapped.

Q: Can it work without HART instruments? A: Yes, it can output standard 4–20 mA for conventional analog actuators, though HART diagnostic functions will not be available.

Q: Is it compatible with GE Speedtronic Mark V / VI / VIe? A: No. It belongs to Emerson DeltaV DCS and has no native interoperability with GE turbine control platforms.