PC104-DPIO DRL-DPM-BKF Product Introduction

  • Beckhoff CX1020-0000 PC/104 embedded controller
  • PROFIBUS DP cables, bus terminating resistors
  • SST Brad configuration driver & diagnostic utility
  • PROFIBUS slave drives and remote I/O stations

 

Category: SKU: PC104-DPIO DRL-DPM-BKF Brand:

Description

PC104-DPIO DRL-DPM-BKF Product Introduction

 

Overview

The PC104-DPIO DRL-DPM-BKF is a PROFIBUS-DP Scanner Master card from Brad Communications (SST / Molex), built on standard PC/104 stackable form factor. It is designed for embedded PC/104 controllers (such as the Beckhoff CX1020 series you previously listed) to add PROFIBUS DP-V0 / DP-V1 bus capability, allowing the embedded host to operate as a PROFIBUS master for exchanging real-time I/O data with DP slaves like drives, remote I/O and field instruments. This legacy board is discontinued and mainly available as surplus or refurbished spare for maintenance of old PC/104-based automation systems.

PC104-DPIO

Key Features & Benefits

  • PROFIBUS DP-V0 / DP-V1 scanner master interface, supports baud rates from 9.6 kbps up to 12 Mbps, auto-baud detection
  • Standard PC/104 bus stacking architecture, compatible with 8-bit /16-bit PC/104 embedded CPU modules
  • Onboard ASPC2 protocol processor and dual-port RAM (DPRAM), offloads PROFIBUS protocol processing from host CPU
  • DB9 female RS485 PROFIBUS connector with optical isolation (500 V isolation) to suppress bus noise
  • Dual status LEDs: BF (Bus Fault), ST (Status) for quick bus diagnosis
  • Supports Windows, VxWorks, QNX, Linux and real-time RTX operating systems
  • Compact stackable design, low power consumption for cabinet embedded control systems
  • Can map cyclic process data, acyclic DPV1 parameter access and alarm messaging

 

Technical Specifications

Item Description
Manufacturer Brad Communications (SST, Molex)
Model PC104-DPIO / DRL-DPM-BKF
Type PC/104 PROFIBUS DP Scanner Master Card
Form Factor PC/104 stackable
Protocol PROFIBUS DP-V0 / DP-V1
Connector DB9 female (PROFIBUS)
Isolation 500 V optical isolation
Baudrate 9.6 kbps ~ 12 Mbps
Onboard Memory 16 KB DPRAM
Indicators BF, ST dual LEDs
Power +5V from PC/104 bus
Operating Temperature 0°C ~ +65°C
OEM Status Discontinued, available as surplus / refurbished spare
Application Embedded PC/104 automation, machine control, legacy PROFIBUS retrofit

 

Typical Applications

It is widely paired with Beckhoff CX1020 or other PC/104 embedded controllers on packaging, printing, textile and special machinery. It connects the embedded PLC to PROFIBUS-DP slave devices such as variable frequency drives, remote I/O modules and valve controllers. It is an essential spare for old machine overhaul and troubleshooting of PC/104-based PROFIBUS networks.

 

Matching Companion Items

  • Beckhoff CX1020-0000 PC/104 embedded controller
  • PROFIBUS DP cables, bus terminating resistors
  • SST Brad configuration driver & diagnostic utility
  • PROFIBUS slave drives and remote I/O stations

 

Operation Notes

It must be installed on a PC/104 CPU stack and requires the matching SST Brad device driver for the target OS. Set unique station address and configure bus parameters before commissioning. Bus termination and grounding must comply with PROFIBUS specifications to avoid communication jitter.

 

FAQ

Q: Can it be used as PROFIBUS slave? A: This variant is a scanner (master) card; slave-only versions are different part numbers.

Q: Is it plug and play with CX1020? A: Hardware stacking fits, but you need to install SST Brad driver and configure TwinCAT to map DPRAM data; it is not native Beckhoff bus terminal.

Q: Can it replace Siemens CP5611? A: No, CP5611 is PCI card; this is PC/104 form factor for embedded stacks, different hardware and driver.