Metso D201832L IPSP Integrated Power Supply & Processor Module, ACN / DNA DCS Rack Controller Module

  • D201832 (standard non-extended base model)
  • D201475L (communication module)
  • D201479 (Ethernet comms module)
  • IOP111, IOP114, IOP302, IOP303, IOP304, IOP310, IOP313, IOP331, IOP345 (Metso DNA I/O series)
  • MBM80 IBC, ACN MR (compatible rack / backplane)
Category: SKU: Metso D201832L IPSP Brand:

Description

Metso D201832L IPSP Integrated Power Supply & Processor Module, ACN / DNA DCS Rack Controller Module

D201832L

Technical Specifications

  • Model Variant: ACN CS D2018 Main Processor, L extended version
  • Power Supply: 24 VDC ±10%, rated power consumption 17 W
  • Processor: 32-bit industrial dual-core RISC
  • Memory: 512 KB RAM, 2 MB Flash
  • Bus: ACN backplane bus master
  • Communication: 1 × RJ45 Ethernet; 1 × RS485 Modbus RTU (reinforced L-type driver)
  • Real-time Cycle: Minimum 1 ms logic execution
  • Field Bus Cable: Max. 300 m with shielded twisted pair
  • Operating Temp: −20 °C ~ +60 °C
  • Storage Temp: −40 °C ~ +85 °C
  • Humidity: 5%–95%, non‑condensing
  • Ingress Protection: IP20 (module); IP54 for full assembled rack
  • Dimension: 220 H × 160 W × 35 D mm
  • Net Weight: 0.89 kg
  • Architecture: Part of Metso DNA / ACN distributed control system, IPSP (Integrated Power Supply + Processor) unit for rack power distribution and control node operation

 

Application Scenarios

  • Oil & gas process control
  • Chemical and petrochemical plants
  • Pulp & paper automation (Valmet/Metso core field)
  • Power plant distributed control
  • Water & wastewater treatment
  • Mining process automation
  • Continuous manufacturing requiring high-reliability DCS nodes

 

Installation and Maintenance

  • Installation: Rack-mounted, hot-swappable within compatible Metso DCS backplane; install in enclosed control cabinet, keep proper ventilation; use shielded cables for RS485 / Ethernet; comply with EMC grounding requirements
  • Maintenance: Regular visual inspection for dust, loose terminals and overheating; verify bus communication status via system diagnostic tool; replace only with matched firmware revision; power down before wiring modification; store spare module within specified temperature range; do not repair on-board components in field; return to authorized service for fault repair

 

Related Models

  • D201832 (standard non-extended base model)
  • D201475L (communication module)
  • D201479 (Ethernet comms module)
  • IOP111, IOP114, IOP302, IOP303, IOP304, IOP310, IOP313, IOP331, IOP345 (Metso DNA I/O series)
  • MBM80 IBC, ACN MR (compatible rack / backplane)