Meggitt Vibro-Meter IOC8T (200-580-000-111) 8-Channel Tachometer & Analog Input Module, VM600 Machinery Protection Spare

  1. IOC4T 200-560-000-111
  2. IOC16T 200-570-000-111
  3. AMC8 200-540-000-111
  4. CPUC 200-510-000-111
  5. CPUC-X
  6. RPS6U 200-582-500-02H
  7. IOC8G
  8. XMV16
  9. 200-530-000-111
  10. VM600 MPC4
  11. CMC16
  12. 200-590-000-111
Category: SKU: Meggitt Brand:

Description

Meggitt Vibro-Meter IOC8T (200-580-000-111) 8-Channel Tachometer & Analog Input Module, VM600 Machinery Protection Spare

 

Product Overview

The Meggitt Vibro-Meter IOC8T, part number 200-580-000-111, is an 8-channel tachometer / keyphasor and analog monitoring input card for the VM600 machinery protection and condition monitoring system. It handles speed, phase reference and analog process signals, normally paired with AMC8 vibration monitoring boards inside the VM600 rack. This SIL2-certified imported spare is widely stocked for steam/gas turbine, compressor and generator protection overhaul in power, oil & gas and petrochemical plants.

IOC8T 200-580-000-111

Key Technical Specifications

  • Part Number: IOC8T
  • Order Code: 200-580-000-111
  • Brand: Meggitt (Vibro-Meter)
  • Compatible Platform: VM600
  • Module Type: Tachometer & Analog Input Controller
  • Channels: 8 isolated channels for keyphasor / tacho + analog signals
  • Signal Types: Keyphasor pulse, speed signal, 4–20mA, voltage process signals
  • Safety Rating: SIL 2
  • Sync: IEEE 1588 PTP precision time synchronization
  • Response: Fast overspeed protection response
  • Rack Interface: VM600 internal backplane bus
  • Power Supply: 24 VDC
  • Operating Temperature: 0 °C ~ +60 °C
  • Storage Temperature: -40 °C ~ +85 °C
  • Relative Humidity: 5% ~ 95 %, non-condensing
  • Mounting: Eurocard plug-in inside VM600 rack
  • Hot Swap: Supported under controlled maintenance
  • Weight: Approx. 0.42 kg
  • Certifications: DNV-GL, ATEX for offshore / hazardous areas

 

Main Features

  1. 8 independent isolated channels for speed, keyphasor and analog process acquisition
  2. High precision timing for overspeed protection, torsional vibration and phase analysis
  3. SIL 2 safety certification for turbine/compressor machinery protection loops
  4. PTP time sync for multi-card, multi-shaft synchronized measurement
  5. Works cooperatively with AMC8 vibration cards in the same rack
  6. Built-in signal diagnostics: open circuit, short circuit, sensor fault
  7. Transfers speed, phase and analog values to CPU for alarm and trip logic
  8. Rugged anti-EMC design for turbine island and compressor cabinet environments
  9. Configuration and fault viewing via Vibro-Meter software
  10. High-value legacy spare for critical rotating machinery protection systems

 

Product Application Information

IOC8T receives pulse signals from keyphasor probes and analog process signals, calculates shaft speed and phase angle, and sends measured data to the main controller. It is the core speed measurement card for overspeed protection and torsional vibration monitoring. If this card fails, speed and phase supervision will be lost, potentially disabling overspeed protection and triggering machine trip. End users keep IOC8T as critical spare to restore machinery protection rapidly.

 

Application Scenarios

  • Thermal power plant steam turbine & generator protection rack
  • Combined cycle gas turbine speed and phase monitoring
  • Oil & gas centrifugal compressor and reciprocating compressor protection
  • Offshore FPSO and platform rotating machinery condition monitoring
  • Petrochemical refinery large pump, fan and turbo-expander monitoring
  • Hydro turbine shaft speed and torsional vibration measurement
  • Cement and steel plant large turbo-machinery protection
  • Waste-to-energy boiler turbine supervision
  • LNG plant compressor safety monitoring
  • Brownfield system maintenance and spare backup

 

Matching / Supporting Components

  • AMC8 vibration monitoring module
  • rack, backplane and RPS6U power supply
  • Keyphasor / eddy current probe + extension cable
  • 4–20mA process transmitters
  • CPU card (CPUC / CPUC-X)
  • configuration software
  • Relay output cards for alarm / trip
  • Rack cooling fan assembly
  • Isolation barriers for hazardous area sensors
  • HMI / historian for vibration and speed trending

 

Related 12 Model References

  1. IOC4T 200-560-000-111
  2. IOC16T 200-570-000-111
  3. AMC8 200-540-000-111
  4. CPUC 200-510-000-111
  5. CPUC-X
  6. RPS6U 200-582-500-02H
  7. IOC8G
  8. XMV16
  9. 200-530-000-111
  10. MPC4
  11. CMC16
  12. 200-590-000-111