Description
Meggitt Vibro-Meter IOC4T (200-560-000-111) 4-Channel Tachometer & Analog Input Module, VM600 Machinery Protection Spare
Product Overview
The Meggitt Vibro-Meter IOC4T, part number 200-560-000-111, is a 4-channel keyphasor / tachometer and analog input card for the VM600 machinery protection and condition monitoring system. It is the smaller sibling of IOC8T, used to collect shaft speed, keyphasor phase pulse and 4–20mA / voltage process signals, and communicates measured data to the VM600 CPU and AMC8 vibration boards. This SIL2 certified spare is widely used on turbines, compressors and rotating equipment in power, oil & gas and petrochemical industries.

IOC4T 200-560-000-111
Key Technical Specifications
- Part Number: IOC4T
- Order Code: 200-560-000-111
- Brand: Meggitt (Vibro-Meter)
- Compatible Platform: VM600
- Module Type: Tachometer & Analog Input Controller
- Channels: 4 isolated channels for keyphasor / tacho and analog signals
- Supported Signals: Keyphasor pulse, speed pulse, 4–20 mA, DC voltage
- Safety Level: SIL 2
- Time Sync: IEEE 1588 PTP precision time synchronization
- Backplane: VM600 proprietary internal bus
- Power Supply: 24 VDC
- Operating Temperature: 0 °C ~ +60 °C
- Storage Temperature: -40 °C ~ +85 °C
- Relative Humidity: 5% ~ 95 %, non-condensing
- Mounting: Eurocard plug-in inside VM600 rack
- Hot Swap: Permitted under controlled maintenance
- Weight: Approx. 0.38 kg
- Certifications: DNV-GL, ATEX suitable for offshore hazardous zones
Main Features
- 4 independent galvanically isolated channels for speed, keyphasor and analog process signal acquisition
- High-precision timing measurement for overspeed protection, torsional vibration and phase analysis
- SIL 2 safety certification for critical machinery protection trip loops
- Supports PTP time synchronization for multi-card synchronized sampling
- Seamless cooperation with AMC8 vibration monitoring cards in the same rack
- Built-in sensor diagnostics: open circuit, short circuit, signal loss and fault alarming
- Transfers speed, phase and process values to CPU for alarm, trending and trip logic
- Optimized EMC performance for noisy turbine and compressor cabinet environments
- Parameter setting, monitoring and fault diagnosis via configuration software
- Compact 4-channel option for small shaft sets or skid-mounted machinery protection
Product Application Information
IOC4T receives pulse signals from keyphasor probes and analog process transmitters. It calculates shaft rotational speed and phase angle, then sends these data to the main controller. It is responsible for overspeed supervision and phase reference for vibration analysis. If IOC4T fails, speed and keyphasor supervision will be lost, which may disable overspeed protection and trigger machine trip. End users keep this spare for fast swap to restore machinery protection function.
Application Scenarios
- Steam turbine and generator protection rack
- Combined cycle gas turbine speed & phase monitoring
- Oil & gas centrifugal and reciprocating compressor safety system
- FPSO and offshore platform rotating machinery condition monitoring
- Refinery turbo-expander, large pump and fan supervision
- Hydropower turbine shaft speed and torsional vibration measurement
- Steel and cement plant large turbo-machinery protection
- Waste-to-energy combustion turbine monitoring
- LNG compressor skid safety monitoring
- Brownfield system maintenance and spare backup
Matching / Supporting Components
- AMC8 vibration monitoring module
- rack, backplane and RPS6U power supply
- Eddy current keyphasor probe and extension cable
- 4–20mA process transmitters
- CPU card (CPUC / CPUC-X)
- engineering configuration software
- Relay output card for alarm and trip
- Rack cooling fan assembly
- Intrinsic safety barrier for hazardous area sensors
- HMI / historian for vibration and speed trend recording
Related 12 Model References
- IOC8T 200-580-000-111
- IOC16T 200-570-000-111
- AMC8 200-540-000-111
- CPUC 200-510-000-111
- CPUC-X
- RPS6U 200-582-500-02H
- IOC8G
- XMV16
- 200-530-000-111
- MPC4
- CMC16
- 200-590-000-111


