HIMA F3236 (984323602) 16‑Channel SIL3 Safety Digital Input Module

  1. F3240 – 16-channel DI module for 110VDC / 127VAC contacts
  2. F3330 – 16-channel safety digital output module
  3. F6217 – Analog input safety module
  4. F6705 – Analog output safety module
  5. F7126 – Communication interface module
  6. F7133 – Power supply module for Planar rack
  7. F8627X – HIMatrix CPU controller
  8. F8650X – High-end HIMatrix safety CPU
  9. F8652X – Redundant HIMatrix controller
  10. Z7116 – Termination adapter cable
Category: SKU: HIMA F3236 (984323602) 16 Brand:

Description

HIMA F3236 (984323602) 16‑Channel SIL3 Safety Digital Input Module

 

Product Introduction

The HIMA F3236 is a 16-channel safety digital input module for HIMA Planar / HIMatrix safety systems, certified SIL3 per IEC 61508. It acquires 24 VDC discrete safety signals in two modes: dry contact switch input or 6 mA current-loop sensor input. Adopting 1oo2D safety architecture, it provides per-channel diagnostics including wire-break detection and short-circuit monitoring. Galvanic isolation between field wiring and backplane bus improves noise immunity. It supports hot swap and is widely used in ESD, F&G and BMS safety loops in process plants. It is a critical spare for maintenance and retrofit of legacy HIMA safety instrumented systems.

F3236 (984323602)

Specification Parameters

Item Specification
Brand HIMA (Germany)
Model F3236, Order No: 984323602
Type Safety Digital Input Module
Channels 16 independent DI channels
Input modes Dry contact / 6 mA current loop (24 VDC nominal)
Safety Level SIL3 (IEC 61508), Cat.4 (EN 954-1)
Typical response time 8 ms
Isolation 1500 VAC field to backplane
Max line resistance 11 Ω per channel
Power supply 5 VDC / 24 VDC from rack backplane
Mounting Planar rack, 4TE form factor
Hot Swap Supported
Operating temperature -20 °C ~ +60 °C
Certifications TÜV, ATEX II 3G Ex nA, CE
Weight Approx. 0.28 kg

 

Application Scenarios

  • Emergency Shutdown System (ESD) signal collection
  • Fire and Gas (F&G) detection and alarm loops
  • Burner Management System (BMS) safety interlocks
  • Petrochemical and refinery safety instrumented systems
  • Onshore & offshore oil & gas platform SIS cabinets
  • Power plant turbine protection and safety interlock
  • Chemical continuous process safety monitoring
  • Spare replacement for existing HIMA Planar racks

 

Recommended 10 Related Models

  1. F3240 – 16-channel DI module for 110VDC / 127VAC contacts
  2. F3330 – 16-channel safety digital output module
  3. F6217 – Analog input safety module
  4. F6705 – Analog output safety module
  5. F7126 – Communication interface module
  6. F7133 – Power supply module for Planar rack
  7. F8627X – HIMatrix CPU controller
  8. F8650X – High-end HIMatrix safety CPU
  9. F8652X – Redundant HIMatrix controller
  10. Z7116 – Termination adapter cable

 

FAQ

Q1: What are the two input types of F3236? A1: Dry contact (mechanical switch) and 6 mA current-loop 1-signal sensors, both 24 VDC field side.

Q2: Can F3236 be hot swapped? A2: Yes, it supports hot-swap replacement on the Planar rack, following HIMA SIS maintenance procedure. Safety bypass must be applied for related safety loop.

Q3: What system platform does F3236 belong to? A3: It belongs to HIMA Planar legacy rack system, compatible with H41q / H51q safety controllers.

Q4: Is it SIL3 certified? A4: Yes, the module itself is SIL3 certified. The full safety loop must be verified in accordance with the safety manual.

Q5: Is discontinued? A5: Yes, Planar series is legacy and out of active production. Available stock is new surplus or fully tested refurbished spares.

Q6: Does it have channel diagnostics? A6: Yes, each channel supports wire break and circuit fault diagnosis for safety integrity monitoring.