Description
HESG324063R100/G (216DB61) Product Introduction
Overview
The HESG324063R100/G, model 216DB61, is an ABB Symphony Plus (Symphony) digital output module for the INFI 90 DCS system. It outputs discrete on/off control signals to drive solenoid valves, contactors, relays and field indicators, executing sequence control, interlock and equipment trip commands in power plant DCS racks. This revision G variant is legacy EOL and widely available as surplus or refurbished spare for thermal power, combined-cycle plant maintenance.

HESG324063R100/G
Key Features & Benefits
- 16-channel isolated digital output module for INFI90 / Symphony Plus rack
- Each channel with built-in fuse protection and back-EMF suppression diode for inductive loads
- Optical isolation between backplane logic side and field output side
- Channel-level fault diagnostics: fuse failure, short-circuit and load fault detection
- Front-panel LED status indication: module OK, channel status and fault alarm
- Supports hardwired interlock and safety permissive outputs for boiler and turbine auxiliary systems
- Conformal-coated PCB, designed for high-noise power plant control cabinet environments
- Communicates via the INFI-NET / IMMPI bus with Symphony controller
- Hot-swappable within the Symphony rack
Technical Specifications
| Item | Description |
|---|---|
| Manufacturer | ABB |
| Model | 216DB61 |
| OEM PN | HESG324063R100/G |
| Type | Symphony INFI90 Digital Output Module |
| Compatible System | ABB Symphony Plus / INFI 90 DCS |
| Channels | 16 DO channels |
| Rated Output | 24/48/125 VDC dry contact / solid-state output |
| Isolation | 2500 VAC group isolation |
| Communication | INFI-NET backplane bus |
| Software | Composer, Symphony Engineering Tool |
| Mounting | Symphony standard rack slot |
| OEM Status | Discontinued, spare support available |
| Application | Power plant boiler, turbine auxiliary control, interlock and sequence logic |
Typical Applications
216DB61 HESG324063R100/G is installed in ABB Symphony DCS racks in thermal power and combined-cycle stations. It outputs commands for lube oil pumps, drain valves, dampers, trip solenoids and auxiliary motor start/stop control. It is a common spare for outage overhaul and legacy INFI90 system life extension.
Matching Companion Items
- BRC300 / BRC400 Symphony controller
- 216AI61 analog input, 216DI61 digital input modules
- INFI-NET terminators, backplane rack and power supply
- ABB Composer configuration software
Operation Notes
Confirm hardware revision (G / H variants) and firmware compatibility with the BRC controller before replacement. After swap, test each channel output and fuse fault alarm function. Load voltage and load type must match module specification to avoid channel burnout.
FAQ
Q: What is the difference between HESG324063R100/G and H variant? A: Both are 216DB61 DO modules; G and H are different hardware revisions, firmware and backplane compatibility need checking, not always direct drop-in.
Q: Can it replace Honeywell C300 or DeltaV DO IOTA? A: No. It is proprietary ABB INFI90/Symphony hardware and cannot be used on Experion or DeltaV racks.
Q: Can it coordinate with GE Speedtronic turbine control? A: Signal exchange is possible through hardwired dry contacts or Modbus gateway, but no native backplane compatibility.
