CC-GAIX11 Product Introduction

  • CC-PAIH02 / CC-PAIX02 Analog Input IOM
  • CC-PCNT01 Processor
  • 51198685-100 FTE Bridge
  • CC-GAIX21 (redundant GI-IS AI IOTA version)
  • FTE network and Experion PKS server nodes
Category: SKU: CC-GAIX11 Brand:

Description

CC-GAIX11 Product Introduction

 

Overview

The CC-GAIX11 is a Honeywell Experion PKS Series C GI-IS non-redundant Analog Input IOTA terminal assembly for C300 controller racks. It pairs with CC-PAIH02 / CC-PAIX02 analog input IOM modules, acquiring standard 4–20 mA, 1–5 V, 0–5 V process signals from field transmitters. This is the non-redundant GI-IS (General Isolated, Intrinsically Safe rated) variant, widely used in hazardous process areas and available as surplus or refurbished spare for legacy Experion PKS maintenance.

CC-GAIX11

Key Features & Benefits

  • 16 analog input channels, configurable as 12 single-ended or 4 differential inputs
  • Supports 2-wire loop-powered transmitters and external-powered voltage/current signals
  • Intrinsically safe / non-incendive design, suitable for Class I Div.2 hazardous zone installation
  • Channel-by-channel open-wire / short-circuit diagnostic detection
  • Galvanic isolation between field side and C300 backplane to avoid ground loop interference
  • Supports HART communication for smart instrument parameter access and diagnostics (when matched with HART IOM)
  • Front LED indicators for module OK, channel fault and field power status
  • Hot-swappable within the C300 rack
  • Conformal-coated PCB for petrochemical, power plant cabinet environments
  • Works with Experion Station for configuration, trending and alarm management

 

Technical Specifications

Item Description
Manufacturer Honeywell
Model CC-GAIX11
Type Analog Input IOTA (GI-IS, Non-Redundant)
Compatible System Experion PKS C300 Controller, Series C I/O
Matched IOM CC-PAIH02 (HART), CC-PAIX02 (non-HART)
Input Signal 4–20 mA, 1–5 V, 0–5 V
Channel Arrangement 16 ch (12 single-ended / 4 differential)
Area Rating Class I Div.2, non-incendive / IS rated
Mounting C300 rack slot
Operating Temperature 0°C ~ +60°C
OEM Status Discontinued, available as surplus/refurbished spare
Application Petrochemical, refining, power generation DCS process measurement

 

Typical Applications

CC-GAIX11 collects pressure, flow, level, temperature and vibration analog signals from field transmitters in combined-cycle power plants and refineries. It sends standardized process values to the C300 controller for closed-loop control, alarming and historian recording. It is a common spare for hazardous-area I/O rack overhaul and planned outages.

 

Matching Companion Items

  • CC-PAIH02 / CC-PAIX02 Analog Input IOM
  • CC-PCNT01 Processor
  • 51198685-100 FTE Bridge
  • CC-GAIX21 (redundant GI-IS AI IOTA version)
  • FTE network and Experion PKS server nodes

 

Operation Notes

CC-GAIX11 is non-redundant, while CC-GAIX21 is the redundant counterpart; they are not interchangeable without rack configuration changes. Verify IOM model, Experion software revision and hazardous area certification requirements before replacement. After swapping, perform channel calibration, wire-break test and HART communication verification if smart transmitters are used.

 

FAQ

Q: What is the difference between CC-GAIX11 and CC-GAIX21? A: CC- = non-redundant GI-IS AI IOTA; CC-GAIX21 = redundant GI-IS AI IOTA. Q: Can it run independently without an IOM? A: No, it is only the field termination assembly; it must pair with the matching analog input IOM module. Q: Is it compatible with DeltaV or ABB Symphony racks? A: No, it is proprietary Honeywell Experion PKS Series C I/O hardware.