Allen‑Bradley 80026-044-06-R IGCT Gate Drive Power Supply Board for PowerFlex 7000 MV Drives

  1. 80026-511-23-R – Another variant of PowerFlex7000 auxiliary board
  2. 5SHY3545L0009 – IGCT press-pack device for PowerFlex7000
  3. 80026-045-01-R – IGCT gate trigger board
  4. 80026-046-01-R – Snubber monitoring board
  5. 2094-SE02F-M00-S0 – Kinetix shunt module
  6. 2094-BC04-M03-S – Kinetix 6000 bulk supply
  7. 80026-040-02-R – Cell monitoring interface board
  8. 80026-042-01-R – Fiber optic receiver board
  9. 80026-047-01-R – Discharge resistor monitoring board
  10. 80026-048-01-R – Cell control logic board
Category: SKU: Allen 80026-044-06-R IGCT Brand:

Description

Allen‑Bradley 80026-044-06-R IGCT Gate Drive Power Supply Board for PowerFlex 7000 MV Drives

 

Product Introduction

The Allen‑Bradley 80026-044-06-R is an isolated gate power supply board exclusively designed for Rockwell PowerFlex 7000 medium voltage IGCT variable frequency drives. It provides stable, galvanically isolated auxiliary power for IGCT gate driver circuits inside the power cell. This board converts the local intermediate DC voltage into multiple low-voltage isolated rails required by the IGCT trigger, monitoring and fault detection electronics. It integrates overvoltage, undervoltage and short-circuit protection circuits. Reliable operation of this power supply is critical for safe switching of the press-pack IGCT stacks. It is a key spare part for overhaul, cell repair and emergency maintenance of legacy PowerFlex 7000 MV drives used on large motors.

80026-044-06-R

Specification Parameters

Item Specification
Brand Rockwell Automation / Allen‑Bradley
Model 80026-044-06-R
Application IGCT gate drive isolated power supply board
Compatible Drive PowerFlex 7000 / PowerFlex 7000H medium voltage drive
System Voltage Up to 6.6 kV MV drive cells
Function Multi-channel isolated power for IGCT gate unit & diagnostic circuit
Protection OV, UV, short-circuit self-protection
Mounting Installed inside PowerFlex7000 power cell
Cooling Convection + forced air cooling from cell fan
Operating Temperature 0 °C ~ +70 °C
Certifications UL, CSA
Weight Approx. 0.45 kg

 

Application Scenarios

  • Mining mill and crusher medium voltage drive cabinets
  • Large conveyor MV variable frequency drives
  • Oil & gas pipeline pump motor drives
  • Power plant large auxiliary motor converters
  • Metallurgical rolling mill medium voltage drives
  • Water plant large pump PowerFlex7000 systems
  • Retrofit and cell overhaul of PowerFlex7000 IGCT stacks
  • Emergency spare replacement for failed gate power boards

 

Recommended 10 Related Models

  1. 80026-511-23-R – Another variant of PowerFlex7000 auxiliary board
  2. 5SHY3545L0009 – IGCT press-pack device for PowerFlex7000
  3. 80026-045-01-R – IGCT gate trigger board
  4. 80026-046-01-R – Snubber monitoring board
  5. 2094-SE02F-M00-S0 – Kinetix shunt module
  6. 2094-BC04-M03-S – Kinetix 6000 bulk supply
  7. 80026-040-02-R – Cell monitoring interface board
  8. 80026-042-01-R – Fiber optic receiver board
  9. 80026-047-01-R – Discharge resistor monitoring board
  10. 80026-048-01-R – Cell control logic board

 

FAQ

Q1: What is the role of 80026-044-06-R? A1: It is not a main power conversion board. It supplies isolated power only for the IGCT gate driver and its fault diagnostic circuits inside the PowerFlex7000 power cell.

Q2: Which drive does it fit? A2: It is built for Rockwell PowerFlex 7000 / 7000H medium voltage IGCT drives. It cannot be used for low voltage Kinetix servo drives.

Q3: Can it be hot swapped? A3: No. It is mounted inside the MV power cell. The entire cell must be fully de-energized, discharged and locked out before opening the cell compartment.

Q4: Is this part discontinued? A4: Yes, the PowerFlex7000 IGCT series is end-of-life. Available stock is new surplus or fully tested refurbished spare boards.

Q5: Does it come with IGCT together? A5: No, this is only the gate power supply PCB. The IGCT press-pack device, fiber trigger board and snubber components are separate spare items.

Q6: What failure symptoms relate to this board? A6: Common alarms include gate supply fault, IGCT feedback loss, cell ready signal missing and repeated cell faults after power-up.