Description
Allen‑Bradley 2094-BC02-M02-S, Kinetix 6000 Integrated Axis Module, 200/230V, 2kW Converter + Axis Drive
Core Product Introduction
The 2094-BC02-M02-S is an integrated converter and axis module for the Rockwell Kinetix 6000 multi-axis servo drive platform. It combines a shared DC-bus power converter section and one servo axis control stage in a single unit. It supports position, velocity and torque control over SERCOS interface, designed for matched Allen‑Bradley MP-series servo motors. Typical applications include packaging machinery, material handling, metal cutting, printing and automated assembly lines. This module features safe torque-off (STO) safety function. It is mature legacy hardware, mostly supplied as spare replacement for existing Kinetix 6000 installations.

2094-BC02-M02-S
Main Technical Specifications
| Item | Parameter |
|---|---|
| Catalog No. | 2094-BC02-M02-S |
| Series | Kinetix 6000 |
| Function | Integrated Bus Converter + Single Axis Module |
| Input Voltage | 200–230 VAC, 3-phase, 50/60 Hz |
| Continuous Power Rating | 2 kW |
| DC Bus | Shared DC bus for Kinetix 6000 axis modules |
| Communication | SERCOS fiber interface |
| Safety | Safe Torque Off (STO) SIL2 / PLd |
| Feedback | Incremental encoder / HiRes encoder |
| Control Modes | Position, velocity, torque |
| Protection | Overcurrent, overvoltage, undervoltage, overtemperature, short circuit, encoder fault |
| Enclosure Rating | IP20 |
| Operating Temperature | 0 °C ~ +45 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 5%–95% RH, non-condensing |
| Mounting | Panel backplate vertical mounting |
| Weight | ~4.3 kg |
| Certifications | cULus, CE |
| Lifecycle Status | EOL, spare stock only |
Quality Control Procedure
- Visual & Label Inspection: Verify original Rockwell label, catalog number 2094-BC02-M02-S, serial number, power terminals, SERCOS fiber ports, motor/encoder connectors; no burn marks, bent pins or corrosion.
- Control Power Boot Test: Apply 24 VDC control supply, confirm power LED, self-test sequence, no abnormal standby current or overheating.
- AC Input Pre-charge & DC Bus Test: Apply 200–230V three-phase mains, check pre-charge circuit and stable DC bus voltage build-up.
- SERCOS Communication Test: Connect SERCOS master, verify fiber link, drive identification and parameter upload/download.
- Encoder Feedback Channel Test: Connect MP-series motor encoder, confirm position reading and zero offset.
- Output Power Stage Test: Low-current jog test, check three-phase output balance and current regulation.
- STO Safety Circuit Test: Trigger STO circuit, verify torque removal and corresponding fault code.
- Fault Alarm Simulation: Simulate overtemp, overvoltage and enable loss to confirm safe shutdown and alarm reporting.
- Firmware Compatibility Check: Confirm firmware version matches machine SERCOS master and motor database.
- Packaging & Traceability: Anti-static bag + foam cushioning, serial-number linked QC report before shipment.
Frequently Asked Questions (FAQ)
Q1: What does BC stand for?A1: BC = Bus Converter. This unit supplies DC bus power for itself and additional Kinetix 6000 axis modules (2094-BMxx).
Q2: What is the difference between 2094-BC02-M02-S and 2094-BC02-M02?A2: The suffix -S means STO (Safe Torque Off) safety function. The non-S version has no built-in STO safety circuit. They are not drop-in interchangeable if the machine safety circuit relies on STO.
Q3: Can I mix 2094-BMxx axis modules with this BC converter?A3: Yes. 2094-BCxx provides the DC bus supply; 2094-BMxx are axis-only modules without converter, they tap the shared DC bus.
Q4: What software is used for commissioning?A4: RSLogix 5000 / Studio5000, plus Motion Analyzer for servo sizing and tuning. SERCOS motion control is configured in the Logix controller.
Q5: Can it drive third-party servo motors?A5: Not recommended. Tuning parameters, encoder protocols and motor characteristic tables are optimized for Allen‑Bradley MP-series motors.
Q6: What is the replacement platform for Kinetix 6000?A6: Kinetix 5500 / Kinetix 5700 are the successors. They use EtherNet/IP instead of SERCOS; wiring, bus and program migration are required, not plug-and-play.
Installation & Configuration Guide
- Pre-install Preparation: 200–230V 3-phase supply, 24VDC control power, SERCOS fiber cable, MP-series servo motor, encoder cable, STO safety wiring, Studio5000.
- Cabinet Layout: Vertical mounting, maintain specified top/bottom airflow clearance, separate power and feedback wiring.
- Wiring: AC mains input, DC bus interconnections, 24V control, motor power, encoder, STO safety circuit, enable and stop signals.
- SERCOS Ring Setup: Install fiber cables following Tx/Rx direction, complete SERCOS ring termination.
- Power-up sequence: 24V control first, then three-phase AC mains; check no major faults.
- Firmware and motor configuration: Load matching firmware, select correct MP motor catalog number, run motor identification.
- SERCOS axis mapping: Assign axis address, link to Logix motion tags, configure velocity/position/torque limits.
- STO safety validation: Test STO circuit to confirm reliable torque removal.
- Commissioning: Jog in velocity mode first, then homing and position moves; tune gains, test limits and emergency stop.
- Backup: Save controller project, drive parameter set and firmware revision to machine archive.
Warning: High DC bus voltage remains after mains disconnection; respect discharge time before touching terminals. Reversing SERCOS fiber Tx/Rx will cause communication failure.
Related Kinetix 6000 Models & Accessories (15 pcs)
| Model | Order Number | Description |
|---|---|---|
| 4kW Integrated Converter Axis | 2094-BC04-M03-S | 4kW BC integrated axis with STO |
| Axis-only Module 2kW | 2094-BM02-S | Kinetix 6000 axis module, STO |
| Axis-only Module 3kW | 2094-BM03-S | 3kW BM servo axis |
| Line Filter | 2094-FILTER | EMC input filter for Kinetix 6000 |
| External Brake Resistor | 2094-R02 | Regen resistor pack |
| SERCOS Fiber Cable | 2090-SCxxx | SERCOS fiber optic jumper |
| MP 2kW Servo Motor | MPL-B4530K-MJ72AA | Matching 2kW MP motor |
| Motor Power Cable | 2090-CPWM7DF-16AA | MP motor power cable |
| Encoder Feedback Cable | 2090-CFBM7DF-CEAA | Hi-res encoder cable |
| 230V 7kW Bus Converter | 2094-BC07 | Bus converter only, no axis |
| Kinetix 5700 Replacement Drive | 2198-H040-ERS | EtherNet/IP newer servo drive |
| STO Terminal Breakout | 2094-TBSTO | STO safety terminal accessory |
| Cooling Fan Kit | 2094-FAN-BC | Replacement fan for BC modules |
| Logix SERCOS Interface Card | 1756-M08SE | 8-axis SERCOS interface module |
| Motion Analyzer Software | MOTION-ANALYZER | Rockwell servo sizing & tuning tool |
