Description
ABB PM861AK01 (3BSE018157R1) AC 800M Processor Unit Kit
Core Product Introduction
The PM861AK01 (3BSE018157R1) is a complete processor kit for ABB AC 800M distributed control system, built around the PM861A CPU module. It is a 32-bit RISC controller designed for process automation, oil & gas, power, pulp & paper, and heavy industrial applications. This kit comes pre-packaged with CPU, TP830 baseplate, bus terminators, backup battery and power connector, ready for direct installation. It supports 1:1 hot redundancy with fast switchover, dual Ethernet control network, S800 I/O expansion, and CompactFlash program backup. Widely used for legacy system spare replacement, controller upgrade and new small-to-medium DCS control nodes. It complies with global industrial standards and hazardous location certifications for reliable continuous operation.

ABB PM861K01 3BSE018105R1
Main Technical Specifications
| Item | Parameter |
|---|---|
| Type | PM861AK01 Processor Unit Kit |
| Order No. | 3BSE018157R1 |
| CPU Core | MPC860, 32-bit RISC, 48 MHz |
| RAM | 16 MB SDRAM |
| Flash Memory | 8 MB for firmware & application |
| Application Available Memory | ~7.15 MB |
| Storage Interface | CompactFlash slot for backup & download |
| Ethernet Ports | 2 × RJ45, 10 Mbps control network |
| Serial Ports | COM3 (RS232 general), COM4 (isolated RS232 service port) |
| Power Supply | 24 V DC, 19.2 ~ 30 V DC tolerance |
| Power Consumption | Typ. 6 W, Max. 10.3 W |
| Redundancy | 1:1 redundant support, <10ms switchover |
| Max S800 I/O Stations | Up to 12 units via ModuleBus |
| Operating Temp | 0 °C ~ +60 °C |
| Storage Temp | -40 °C ~ +70 °C |
| Humidity | 5% ~ 95% non-condensing |
| Protection Class | IP20 |
| Mounting | DIN rail via TP830 baseplate |
| Kit Contents | PM861A CPU, TP830 baseplate, TB850, TB807, TB852 terminators, backup battery, 4-pin power plug |
| Net Weight | ~1.2 kg |
| Certifications | CE, UL508, cULus Class I Div.2 / Zone 2, DNV, ABS, RoHS |
Quality Control Procedure
- Visual & Document Inspection: Verify part number, label, serial number, packaging integrity, and original factory marking. Check no physical scratch, burn mark or corrosion on PCB and connector.
- Power Cycle Test: Apply regulated 24VDC power supply; confirm RUN / FAIL LED status, no overcurrent or abnormal heating.
- Communication Interface Test: Test dual Ethernet and isolated RS232 service port connectivity; verify bus terminator function.
- Redundancy Link Test: Pair with matched PM861 unit to validate RCPU link and redundant switchover performance.
- Memory & Backup Battery Check: Confirm RAM/Flash recognition, battery voltage and memory retention function.
- Firmware Compatibility Check: Load standard AC800M firmware to confirm normal initialization and CEX bus handshake.
- Environmental Screening (for critical stock): Short temperature cycling test, humidity soak test.
- Final Packaging & QC Report: Attach inspection record, anti-static sealing, shockproof packing before shipment. All units are traceable with serial number records.
Frequently Asked Questions (FAQ)
Q1: What is the difference between PM861AK01 (3BSE018157R1) and PM861K01 (3BSE018105R1)?A1: PM861AK01 is the upgraded A version with PM861A CPU; PM861K01 is the original PM861 version. They are not fully firmware cross-compatible.
Q2: Does this kit support hot swap?A2: The CPU module can be hot-swapped on the TP830 baseplate when the system is configured for redundancy. Single non-redundant node must be powered down before removal.
Q3: How long can the backup battery retain memory?A3: Standard internal battery supports minimum 118 hours data retention. External SB821 / SB822 battery can extend backup time for long power outage scenarios.
Q4: Can it work with S900 I/O?A4: PM861A is designed for S800 I/O via ModuleBus; S900 requires other AC800M controller models.
Q5: Is this unit suitable for Zone 2 hazardous area?A5: Yes, it carries cULus / AEx nA IIC T4 certification for Class I Zone 2, suitable for oil & gas and chemical hazardous locations.
Q6: What cable is needed for redundant CPU link?A6: TK851 or TK855 redundant link cable for RCPU connection between paired PM861A controllers.
Installation & Configuration Guide
- Pre-installation Preparation: Confirm ambient temperature, dust, vibration and ESD protection. Use anti-static wristband during handling. Prepare 24VDC regulated power supply, CCB (Compact Control Builder) programming software, Ethernet cable and TK851 redundancy cable if required.
- Mechanical Mounting: Clip TP830 baseplate onto standard DIN rail. Ensure sufficient clearance for ventilation (≥20mm top/bottom).
- Bus Terminator Installation: Install TB807 (ModuleBus), TB850 (CEX-bus), TB852 (RCPU-Link) terminators as per bus topology. Missing terminators cause unstable communication.
- Wiring: Connect 24VDC power plug; strictly separate control power and I/O power wiring. Ground the baseplate to protective earth.
- CPU Insertion: Slide PM861A CPU into TP830 baseplate and lock the latch. Do not force insertion.
- Power-up & Initialization: Apply 24VDC power. Observe LED sequence: INIT → RUN. If FAIL LED stays on, check power, terminator and bus short circuit.
- PC Connection & Configuration: Connect PC to COM4 isolated service port or Ethernet. Launch Compact Control Builder, assign controller IP, download hardware configuration and application program.
- Redundancy Setup (Optional): Mount second , connect TK851 cable, configure redundant pair in CCB, download redundancy settings and test failover.
- I/O Commissioning: Connect S800 I/O modules on ModuleBus, scan I/O nodes and verify channel status.
- Backup: Save project to CompactFlash card for on-site restore purpose.
Warning: Do not plug/unplug serial/Ethernet cables while high voltage is nearby. Remove power before replacing terminators or battery.
Related ABB AC800M Models & Order Number Recommendation (15 pcs)
| Model | Order Number | Description |
|---|---|---|
| PM861K01 | 3BSE018105R1 | PM861 Processor Unit Kit (Non-A version) |
| PM864AK01 | 3BSE018161R1 | High-performance AC800M Processor Kit |
| PM866K01 | 3BSE025349R1 | Top-range AC800M Controller Kit |
| PM856K01 | 3BSE018104R1 | Mid-range AC800M Processor Unit Kit |
| CI853 | 3BSE018103R1 | PROFIBUS-DP Communication Interface |
| CI854A | 3BSE030220R1 | AF100 Communication Interface |
| CI854B | 3BSE069449R1 | Upgraded AF100 Interface Module |
| CI855 | 3BSE018106R1 | Modbus Master Interface |
| CI857 | 3BSE018144R1 | Interbus Communication Module |
| CI858 | 3BSE018135R1 | DeviceNet Interface |
| TP830 | 3BSE018155R1 | Baseplate for PM861A |
| SB821 | 3BSE008508R1 | External Backup Battery Unit |
| TB850 | 3BSE018164R1 | CEX Bus Terminator |
| TB807 | 3BSE018163R1 | ModuleBus Terminator |
| TK851 | 3BSE020508R1 | Redundant RCPU Link Cable |



