Description
ABB CI854 PROFIBUS DP-V1 Communication Interface Module for AC 800M Controller
Product Introduction
The ABB CI854 is a PROFIBUS DP‑V1 master communication interface designed for the ABB AC 800M controller under System 800xA DCS platform. It serves as the bridge between the AC 800M controller and PROFIBUS DP field slaves, including remote I/O, variable frequency drives, valve positioners, sensors and field instruments. It is equipped with dual PROFIBUS ports to support bus line redundancy, and the module itself can be configured for master redundancy together with a paired CI854. It supports DP‑V1 acyclic services for parameter upload/download and diagnostic access to intelligent field devices. The CI854 kit consists of the interface board and a matching TP854 baseplate, supporting hot-swap replacement without shutting down the controller node. It is configured via Compact Control Builder, with front‑panel LEDs for bus status, communication activity and fault indication. Widely deployed for integrating legacy and new PROFIBUS DP field networks into 800xA process control systems.

ABB CI854
Specification Parameters
| Item | Specification |
|---|---|
| Brand | ABB |
| Model | CI854 (CI854K01 / CI854AK01 / CI854BK01 variants) |
| Platform | AC 800M, System 800xA |
| Protocol | PROFIBUS DP / DP‑V1, Master mode |
| Number of Ports | 2 PROFIBUS ports for line redundancy |
| Baud Rate | 9.6 kbps ~ 12 Mbps |
| Max Slaves | Up to 124 PROFIBUS slaves per CI854 master |
| Redundancy | Bus line redundancy; Module master redundancy supported |
| Baseplate | TP854 (included in complete kit) |
| Hot Swap | Supported |
| Configuration Tool | Compact Control Builder |
| Indicators | LED for power, bus active, fault status |
| Operating Temperature | 0 °C ~ +60 °C |
| Humidity | 5%–95% non‑condensing |
| Certifications | CE, ATEX, IEC 61158 |
| Weight | Approx. 0.7 kg |
| Mounting | DIN rail, S800 control rack slot |
Application Scenarios
- Petrochemical and refinery DCS fieldbus integration
- Power plant boiler, turbine and auxiliary control systems
- Pulp & paper mill production line automation
- Water treatment plant PROFIBUS remote I/O networking
- Cement, mining and metal processing control cabinets
- Offshore oil & gas process control and F&G systems
- Food & beverage batch process automation
- Legacy ABB 800xA system spare replacement and retrofit
Recommended 10 Related Models
- CI854BK01 – Updated RoHS compliant PROFIBUS DP-V1 interface
- CI854AK01 – Earlier generation variant
- CI853 – Modbus RTU / COMLI serial communication module
- CI855 – MasterBus 300 communication interface
- CI856 – S100 I/O bus interface module
- CI868 – IEC 61850 Ethernet communication module
- CI871 – Ethernet IP communication interface
- TP854 – Baseplate for series
- BC810 – CEX bus redundancy module for AC800M
- PM866 – AC 800M redundant processor unit
FAQ
Q1: What are the differences between CI854K01, CI854AK01 and CI854BK01? A1: CI854K01 is the original version; CI854AK01 is an intermediate revision; CI854BK01 is the newer RoHS-compliant version for new installations. CI854AK01 is restricted for spare repair only for older systems.
Q2: Does work as PROFIBUS master or slave? A2: operates only as PROFIBUS DP‑V1 master, it cannot run as a DP slave.
Q3: Can be hot swapped? A3: Yes, hot swap is supported when installed on TP854 baseplate within a compatible AC800M rack. Follow 800xA maintenance procedure to avoid alarms.
Q4: Can two modules run redundant master mode? A4: Yes. Paired modules can be set up for PROFIBUS master redundancy, combined with AC800M CPU redundancy for high‑availability control.
Q5: Is still in active production? A5: CI854A / CI854K01 are legacy phased‑out revisions. CI854BK01 is the current replacement variant. Stock of older revisions is mostly new surplus or fully tested refurbished spares.
Q6: Does it support PROFIBUS DP-V0 only? A6: It supports both DP‑V0 cyclic data exchange and DP‑V1 acyclic services for intelligent device diagnosis and parameterisation.


