Description
ABB 3BSE018741R50 (PFTL 101/201/PFCL 201 Cable, 50 m)
Product Introduction
The 3BSE018741R50 is an original ABB shielded signal cable assembly with pre-fitted male connector, purpose-built for ABB Pressductor® tension load cells including PFTL101, PFTL201 and PFCL201 series. It transmits the low-level magneto‑elastic AC sensor signal and excitation power between the load cell and PFEA tension electronics (PFEA111, PFEA112, PFEA113), forming a complete tension measurement loop for web processing lines.
This factory-terminated 50-metre cable assembly eliminates on-site crimping and wiring errors. Its specially matched impedance and heavy shielding are critical for preserving signal integrity over long distances, suppressing EMI interference in mill environments where variable frequency drives and high-power machinery are present. It is a standard spare accessory for the PFTL load cell family we covered earlier (PFTL101A 2kN / 3BSE004172R1).

3BSE018741R50
Key Technical Specifications
| Item | Specification |
|---|---|
| Part Number | 3BSE018741R50 |
| ABB Type | PFTL 101/201/PFCL 201 Cable, 50 m |
| Description | Signal cable with male plug connector |
| Compatible Sensors | PFTL101, PFTL201, PFCL201 Pressductor tension load cells |
| Compatible Amplifiers | PFEA111‑65, PFEA112‑65, PFEA113‑65 |
| Cable Length | 50 m |
| Construction | Multi-core, individually shielded, overall shielded |
| Connector | Factory-installed male connector matching PFTL load cell interface |
| Signal Type | 330 Hz AC excitation + low-level tension measurement signal |
| Gross Weight | ~5 kg |
| Origin | Poland / USA |
| Protection | Oil-resistant, abrasion-resistant outer jacket for machine routing |
| Customs HS Code | 85389091 |
Main Features & Advantages
- Factory pre-terminated assembly: Ready to install directly, reducing commissioning labour and wiring faults.
- Optimised shielding design: Matched for the low-amplitude Pressductor AC signal, minimising noise pickup over long cable runs.
- System-matched impedance: Calibrated to work with ABB PFEA tension amplifiers, no gain offset or recalibration required after replacement.
- Robust industrial jacket: Tolerates continuous vibration, oil mist and dust typical in paper, film and metal processing mills.
- Single-source spare part: Validated ABB original accessory, guaranteed interoperability with the full Pressductor tension ecosystem.
- Fixed length option: 50 m variant for long-span machine layouts where shorter standard cables are insufficient.
Product History & Lifecycle
This cable family was released alongside the PFTL101 series pillow-block load cells and the PFEA11x tension amplifier platform as a system accessory. ABB offers multiple standard lengths for this cable line; the suffix R50 denotes the 50 m version.
While the cable itself is a passive accessory and not an electronic module, it remains an active stocked spare worldwide. In many retrofit projects, aged or damaged load cell cables are a common root cause of unstable tension readings, so this assembly is frequently sold together with PFTL load cells and PFEA amplifiers for maintenance overhauls. It is not a new-design item but a lifecycle support component for the large installed base of ABB web tension systems.
Typical Applications
- Paper, board and tissue machine tension sections
- Plastic film, BOPP, foil and flexible packaging converting lines
- Aluminium, copper and steel strip processing
- Textile, fibre, wire and cable extrusion lines
- Printing, slitting and rewinding machinery
Cross Reference (Other Length Variants)
- 3BSE018741R10: 10 m cable
- 3BSE018741R20: 20 m cable
- 3BSE018741R30: 30 m cable
- 3BSE018741R50: 50 m cable (this item)
- Matching load cell: PFTL101A 2kN (3BSE004172R1)
- Matching amplifier: PFEA111‑65 (3BSE050090R65)

