Description
51198685-100 Product Introduction
Overview
The 51198685-100 is a Honeywell Experion PKS redundant FTE bridge module, also known as the FTE Bridge Card. It serves as the critical network interface between the C300 control node and the Fault Tolerant Ethernet (FTE) control network, enabling fault-tolerant redundant communication for Experion PKS DCS. It works in pairs for redundant configuration and is widely supplied as surplus or refurbished spare for legacy Experion PKS system maintenance and outage replacement.

51198685-100
Key Features & Benefits
- Dual FTE network ports for fault tolerant Ethernet communication, supporting bumpless network switchover upon single link failure
- Acts as the communication gateway between C300 controller backplane and plant FTE control network
- Supports simplex or redundant bridge pairing to meet high-availability control requirements
- Built-in comprehensive hardware diagnostics and front-panel LED indicators for link status, activity and fault alarms
- Conformal coated PCB, suitable for control cabinets in power, petrochemical and chemical plants
- Hot-swappable within the C300 rack assembly
- Managed via Experion Station software for network configuration, diagnostic viewing and firmware upgrade
- Isolated circuit design to protect the control backplane from external network surge and interference
Technical Specifications
| Item | Description |
|---|---|
| Manufacturer | Honeywell |
| Model | 51198685-100 |
| Type | FTE Bridge Module for Experion PKS C300 |
| Compatible System | Honeywell Experion PKS DCS, C300 Controller Rack |
| Network Interface | Dual FTE Ethernet ports |
| Redundancy | Supports redundant bridge pairing |
| Mounting | C300 control rack slot |
| Operating Temperature | 0°C ~ +60°C |
| OEM Status | Discontinued, available as surplus / refurbished spare |
| Application | Process control, power generation, refinery and chemical DCS control network |
Typical Applications
51198685-100 is installed in controller racks to connect CC-PCNT01 processor modules to the Experion FTE control network. It transmits real-time control data, alarm messages and historian data between controllers, HMI servers and other network nodes. It is an essential spare for planned outages, network hardware failure replacement and lifecycle support for legacy Experion PKS installations.
Matching Companion Modules
- CC-PCNT01 – Processor Module
- CC-TCNT01 – IOTA Termination Base
- Other IOTA I/O packs
- Honeywell FTE network switches and FTE cables
Operation Notes
Verify Experion PKS software and firmware compatibility before replacement. When using redundant bridge configuration, confirm dual FTE link synchronization and fault switchover test after installation. Follow Honeywell’s grounding and network wiring specifications for FTE to avoid communication instability.
FAQ
Q: Can 51198685-100 work without a processor? A: No. It is a dedicated backplane communication card for the rack and must pair with the control node.
Q: Is it compatible with DeltaV or ABB control systems? A: No, it is Honeywell Experion PKS proprietary hardware and cannot be used on other DCS platforms.
Q: Is one card enough or must it be used in pairs? A: It can run in simplex mode; redundant critical control loops usually deploy two bridge cards for network redundancy.

