Description
3BSE050092R65, ABB PFEA113-65 High-end Tension Electronics, IP65 enclosed version for web tension measurement
Core Product Introduction
PFEA113-65 (3BSE050092R65) is the top model of ABB PFEA11 series tension amplifier, designed for Pressductor load cells in web processing lines. It supports up to 4 load cells, provides high-precision tension acquisition, signal conditioning, filtering and transmission to PLC/DCS via Profibus-DP. It features local LCD display, remote zero, gain scheduling, multi-segment roll combination (max 3 units cascaded for 12 load cells). Widely used in paper, film, foil, textile, coating, slitting, printing and battery electrode production lines. This suffix -65 variant is IP65 enclosed cabinet type, suitable for dusty, splashing workshop floor installation, different from DIN-rail IP20 PFEA113-20.

PFEA113-65 3BSE050092R65
Main Technical Specifications
| Item | Parameter |
|---|---|
| Part Number | PFEA113-65 / 3BSE050092R65 |
| Manufacturer | ABB Measurement & Analytics, Origin: Sweden |
| Function | Web tension measurement & signal transmitter |
| Enclosure Rating | IP65 |
| Power Supply | 100–240 VAC 47–63Hz or 24VDC (18–36VDC) |
| Power Consumption | Max 15W |
| Load Cell Support | Up to 4 pcs Pressductor load cells, excitation: 0.5A rms @330Hz |
| Inputs | 1 digital input (remote zero / gain switch), 2 analog cascade inputs |
| Outputs | 6 configurable analog outputs (0–21mA / voltage), 4 digital alarm outputs |
| Communication | Profibus-DP |
| Display | 2×16 multi-language LCD, units: N, kN, kg, lbs, N/m, pli etc. |
| Filter Setting | Adjustable step response: 5/15/30/75/250/750/1500ms |
| Cascade | Up to 3 PFEA113 chained for segmented winder applications |
| Operating Temperature | 0°C ~ +50°C |
| Storage Temperature | -40°C ~ +85°C |
| Humidity | 5%–95% RH, non-condensing |
| Certifications | CE, UL61010, CSA |
| Lifecycle Status | Mature, spare stock available |
| Weight | ~5.95 kg |
Quality Control Procedure
- Visual & Label Inspection: Verify ABB original marking, part number 3BSE050092R65 / PFEA113-65, serial number, enclosure seal integrity, cable glands and LCD screen without scratches.
- Power Boot Test: Apply AC or DC supply, confirm power LED, LCD startup and self-check, no abnormal heat.
- Load Cell Excitation Test: Check 330Hz 0.5A excitation output for 4 load cell channels.
- Tension Signal Calibration Test: Inject standard strain signal, verify reading accuracy, zero and span adjustment.
- Analog Output Test: Check each AO channel linearity under varied tension value.
- Digital Input / Remote Zero Test: Trigger DI to execute remote zero and gain switching.
- Profibus-DP Communication Test: Connect to Profibus master, read tension value, alarm status and diagnostic data.
- Cascade Function Test: Link with another , verify multi-unit synchronized measurement.
- Alarm & Diagnostic Simulation: Simulate load cell break, cable short, over-range to check DO alarm output and fault code.
- Packaging & Traceability: Shock-proof packing, serial-number QC report before shipment.
Frequently Asked Questions (FAQ)
Q1: What is the difference between -20 and -65?A1: -20 = IP20 DIN rail mount for control cabinet; -65 = IP65 sealed enclosure, direct machine / floor mounting for harsh production environment. Internal function and firmware are identical.
Q2: What load cells match ?A2: ABB Pressductor PillowBlock and Radial load cells (PFTL series). Not compatible with generic strain gauge load cells without Pressductor excitation.
Q3: Can it run as a closed-loop tension controller?A3: is a measurement electronics / signal transmitter only. It outputs tension signal to PLC or drive controller; it does NOT contain PID closed-loop control algorithm itself.
Q4: What software is used for parameter setup?A4: Local keypad + LCD for most setup; Profibus can also write parameters online. No separate PC configuration software required.
Q5: Can multiple be connected together?A5: Yes, up to 3 units cascaded for wide-width segmented winder, total 12 load cells.
Q6: What communication does it support?A6: Profibus-DP only. If Ethernet is required, select other ABB tension system or external Profibus gateway.
Installation & Configuration Guide
- Pre-install Preparation: PFTL Pressductor load cells, shielded sensor cable, Profibus DP cable, AC/DC power source.
- Mounting: Fix IP65 enclosure on machine frame, keep away from strong vibration and heat source.
- Wiring: Power, load cell cables, analog outputs, Profibus-DP bus; use shielded cable and single-point earthing.
- Power Up: Switch on power, pass self-diagnosis, confirm no load cell fault alarm.
- Load Cell Assignment: Set channel quantity, sensor type, rated load via front keypad.
- Zero & Span Calibration: Perform mechanical zero and span calibration with known weight.
- Output Configuration: Set each AO as tension, deviation or alarm signal, choose filter time constant.
- Profibus Setup: Set station address, baud rate, map tension and diagnostic data to PLC.
- Cascade setup (if needed): Enable inter-unit analog link for multi-segment roll.
- Backup: Record all calibration parameters, save fault code list and machine recipe.
Warning: Pressductor load cell cables must be kept away from inverter power cables to avoid excitation signal interference; wrong wiring will cause unstable tension reading or hardware damage.
Related ABB Tension Series Models & Accessories (15 pcs)
| Model | Order Number | Description |
|---|---|---|
| DIN rail | -20 / 3BSE050092R60 | IP20 DIN mount version |
| Mid-range tension unit | PFEA112 | 2 load cells, Profibus |
| Basic tension unit | PFEA111 | 2 load cells, no Profibus |
| Pressductor load cell | PFTL101A | PillowBlock tension load cell |
| Radial load cell | PFTL201C | Radial type load cell |
| Load cell cable | 3BSE004166R1 | Shielded Pressductor extension cable |
| Profibus DP connector | 3BSE003275R1 | DP bus terminator plug |
| front keypad cover | 3BSE050112R1 | Spare protective window |
| Tension display accessory | PFEA-DISPLAY | Remote display |
| Profibus DP repeater | PBDP-REP | Bus signal repeater |
| PFEA122 | PFEA122 | High temp variant |
| Calibration weight kit | ABB-CAL-WEIGHT | Tension calibration mass set |
| IP65 gland kit | 3BSE050114R1 | Spare cable gland set |
| PFEA11 series manual | PFEA11-MANUAL | Operation & service manual |
| Profibus gateway | PDP800 | Symphony Plus DP master module |


