ICS Triplex T8451C Trusted TMR CCoat 40‑Channel 24VDC Digital Output Module, SIL3 Safety DO Card, Ready Stock
Product Overview
The T8451C is a triple-modular redundant (TMR) digital output module belonging to the ICS Triplex Trusted T8000 safety platform, now part of Rockwell Automation. The suffix “C” denotes conformal coated (CCoat) construction for humid, corrosive industrial environments. It provides 40 channels of 24 VDC safety-rated digital outputs, grouped into 5 isolated power banks (8 channels per group). Built-in per-channel diagnostics detect open circuit, short circuit and load faults. It supports 1 ms resolution Sequence of Events (SOE) timestamping, hot-swap replacement and 2.5 kV galvanic isolation. Widely deployed in Emergency Shutdown (ESD), Fire & Gas (FGS), burner management and compressor safety systems in oil & gas, petrochemical and power plants.
Technical Parameters
| Item | Specification |
|---|---|
| Part Number | T8451C |
| Manufacturer | ICS Triplex / Rockwell Automation |
| Series | Trusted T8000 TMR Safety System |
| Product Type | 40‑Channel 24VDC Digital Output Module (CCoat Conformal Coated) |
| Architecture | Triple Modular Redundant (TMR) |
| Safety Certification | SIL 3, IEC 61508 / IEC 61511, TÜV certified |
| Output Voltage | 18–32 VDC (nominal 24 VDC) |
| Channel Grouping | 5 isolated power groups, 8 channels each |
| Isolation | 2500 VDC impulse withstand opto‑isolation |
| Diagnostics | Per-channel open/short/load fault detection |
| SOE Resolution | 1 ms |
| Hot Swap | Supported, Companion Slot / SmartSlot maintenance |
| Operating Temperature | -5 °C ~ +60 °C |
| Storage Temperature | -25 °C ~ +70 °C |
| Relative Humidity | 5%–95%, non‑condensing |
| Cooling | Convection cooling |
| Mounting | Trusted T8000 chassis backplane slot mount |
| Net Weight | Approx. 1.13 kg |
| Country of Origin | Mexico |
| Feature | Conformal coating for harsh offshore / coastal corrosive environments |
| Condition | Original genuine, available in stock |
Brand History & Introduction (ICS Triplex Trusted TMR Lineage)
ICS Triplex pioneered commercial TMR safety PLC technology for process safety applications. The Trusted T8000 platform became the global benchmark for high-integrity ESD and FGS systems, competing with other SIL3 safety controllers. TMR voting enables the system to tolerate a single internal fault while maintaining safe operation, avoiding spurious trips and preventing dangerous failures.
The T8451 is the base 40-channel DO module; T8451C is the conformal-coated variant for offshore, coastal and high-humidity sites where condensation, salt mist and chemical vapours threaten bare PCB electronics. Rockwell Automation acquired the ICS Triplex Trusted product line and continues to support the T8000 installed base.
Although newer safety controller families have been launched, massive installed Trusted T8000 systems remain operational on refineries, LNG terminals, pipeline compressor stations and offshore platforms. T8451C is a frequently requested critical spare for safety loop maintenance and shutdown outage work.
Key Advantages
- TMR triple voting architecture, SIL3 rated for process safety loops
- Conformal coating (CCoat) for offshore, salt-air and corrosive environments
- 40 channels on one module, compact high-density safety output
- Built-in per-channel diagnostics and 1ms SOE for incident post-analysis
- Hot-swappable, replace online without full safety system shutdown
- Isolated power groups reduce common-cause fault risks
- Fully compatible with Trusted chassis and processor modules
Typical Applications
- Oil & gas ESD emergency shutdown systems
- Fire and gas (FGS) detection & suppression control
- Petrochemical burner management systems (BMS)
- Pipeline compressor anti-surge and safety protection
- Power plant turbine safety interlock systems
- Offshore platform safety control cabinets
FAQ Snippet
Q: What is the difference between T8451 and T8451C? A: T8451 = standard uncoated PCB; = conformal coated version for harsh corrosive / offshore environments. Function and pinout are identical.
Q: Can it be hot replaced while the safety system runs? A: Yes, when the system is configured with Companion Slot or SmartSlot spare architecture. Follow official Trusted maintenance procedure.
Q: Is it SIL 2 only? A: No, TÜV certified SIL 3 for suitable safety loop architecture.




