GE 151X1235DB15SA01 PCM Power Control Module, 35A Exciter Power Converter for EX2100e Static Excitation System, Ready Stock
Product Overview
The 151X1235DB15SA01 is a core PCM (Power Control Module) power converter unit for GE EX2100e digital static excitation platform. It is the IGBT-based PWM power stage that delivers regulated DC field current to the generator rotor winding, executing AVR excitation commands issued by the EX2100e triple-redundant controller. This module accepts AC mains input plus backup DC battery input, converts it to adjustable DC excitation output, and provides forced excitation boost capability during grid disturbances. It works in M1 / M2 dual redundant configuration for uninterrupted generator excitation control.
Important note: SA01 is legacy revision, end-of-life; successor revisions: 151X1235DB15SA02, 151X1235DB15SA03
Technical Parameters
| Item | Specification |
|---|---|
| Part Number | 151X1235DB15SA01 |
| Manufacturer | General Electric (GE / GE Vernova) |
| Product Type | PCM Power Control Module / Excitation Power Converter |
| Compatible System | EX2100e Static Excitation System |
| Continuous DC Output | 35 A |
| Forced Excitation Peak | 73.5 A (210% rated, short-time) |
| AC Input | 90–280 Vrms, 45–480 Hz, single / three phase |
| Backup DC Input | 125–250 VDC battery backup |
| Regulated Field Output | 0–250 VDC |
| Topology | IGBT PWM power bridge |
| Switching Frequency | Approx. 1000 Hz |
| Protection | Overcurrent, overvoltage, undervoltage, overtemperature, short circuit |
| Communication | Internal high-speed bus linking to EX2100e DSP controllers |
| Mounting | Rack-mount inside EX2100e excitation cubicle |
| Operating Temperature | -20 °C ~ +70 °C (derate at high ambient) |
| Storage Temperature | -40 °C ~ +85 °C |
| Country of Origin | United States |
| Cross Reference Upgrade | 151X1235DB15SA02 / SA03 |
| Condition | Original genuine, available in stock |
Brand History & Introduction (EX2100e Lineage)
GE EX2100e is the upgraded digital successor to the classic EX2100 excitation system, designed for large synchronous generators on steam, gas and hydro turbines. Compared with original EX2100, EX2100e adopts triple redundant M1/M2/C control architecture: two active M1/M2 PCM power modules with automatic bumpless transfer, plus C channel for fault supervision and voting logic, greatly improving excitation availability for critical power generation assets.
The 151X1235DB15xx series PCM is the power workhorse of EX2100e. The SA01 revision is the original production version built with legacy Powerex IGBT devices which have become obsolete. GE later released SA02 and SA03 upgraded revisions with modern IGBT components and updated firmware compatibility, requiring ControlST software version V07.04.00C or higher for commissioning.
This PCM receives firing setpoints from the excitation regulator DSP, adjusts rotor field current in real time to stabilize generator terminal voltage and reactive power, and supports PSS, UEL, OEL and other power system stabilisation functions. Thousands of combined-cycle, fossil and hydro generating units worldwide run with EX2100e, making the 151X1235DB15SA01 a high-priority outage spare, though new SA01 stock is limited globally.
Key Advantages
- Dedicated PWM power stage for EX2100e, matched to triple redundant control logic
- Dual AC + DC battery input ensures excitation survives auxiliary power loss
- Built-in high-speed forced excitation response for grid fault support
- Comprehensive self-protection and diagnostic feedback to the main controller
- Hot-swap capable within the EX2100e rack for redundant configuration
- Drop-in footprint compatible, can be upgraded to SA02 / SA03 with software adjustment
Typical Applications
- Large steam turbine generator EX2100e excitation cabinets
- Gas turbine combined-cycle generator excitation control
- Hydroelectric generator static excitation packages
- Power plant excitation retrofits and emergency outage spares
FAQ Snippet
Q: What is the difference between SA01, SA02 and SA03? A: SA01 = original legacy IGBT version, EOL; SA02 / SA03 = updated IGBT hardware, newer firmware, current supported revision. Physical footprint is identical but software compatibility must be verified before replacement.
Q: Can one PCM run the generator alone? A: Yes, but the standard design uses M1+M2 redundant pair to avoid excitation loss upon single module failure.
Q: Is this the regulator CPU board? A: No. This is the power output PCM. The DSP regulator control boards are separate assemblies in the EX2100e rack.




