Bosch Rexroth (Indramat) PPC-R22.1N-T-Q1-P2-NN-FW Multi-Axis Motion Control Unit, Sercos / Profibus Interface, Ready Stock
Product Overview
PPC-R22.1N-T-Q1-P2-NN-FW is a classic Rexroth Indramat PPC-R22.1 series real-time motion controller, designed for multi-axis synchronized servo control via Sercos interface. This specific configuration includes Q1 = Sercos master and P2 = Profibus-DP slave communication ports. It executes CNC / motion sequence, electronic cam, synchronization, positioning and logic control, connects to Indramat DKS / DKC / HDS servo drives over Sercos bus, and exchanges process data with host PLC through Profibus-DP. It uses CompactFlash for program and firmware storage. Widely used on printing presses, packaging machinery, textile machines and special machine tools.
Note: Indramat PPC-R22.1 series is End-of-Life, legacy RECO rack form factor.
Technical Parameters
| Item | Specification |
|---|---|
| Part Number | PPC-R22.1N-T-Q1-P2-NN-FW |
| Manufacturer | Bosch Rexroth Indramat |
| Series | PPC-R22.1 Motion Controller |
| Housing | RECO rack module |
| Power Supply | 24 VDC (19.2–30 VDC), max 1.2A |
| Communication | Q1: Sercos master; P2: Profibus-DP slave; Ethernet; 2× serial RS232 |
| Memory | 32MB CF card slot for program / firmware |
| I/O | Built-in fast digital I/O, 50µs input capture, 0.5A DO |
| Fieldbus Speed | Sercos up to 16 Mbaud; Profibus-DP up to 12 Mbaud |
| Protection | IP20 |
| Operating Temp | 0 °C ~ +50 °C |
| Storage Temp | -40 °C ~ +85 °C |
| Country of Origin | Germany |
| Condition | Original genuine, available in stock |
Brand History & Introduction (.1 Lineage)
Indramat .1 is a well-known standalone motion controller before Rexroth’s IndraControl platform. It is the motion master for Sercos servo networks. Different suffix letters define onboard bus options:
- Q1 = Sercos master
- P2 = Profibus-DP slave
- NN = no extra option card
Rexroth has discontinued .1 hardware; the migration successor is IndraControl L / XM series controllers. A large installed base of old printing, slitter and converting machines still depend on this controller, making it a high-priority breakdown spare.
Key Advantages
- Combined Sercos + Profibus dual bus, ideal for servo sync + PLC host communication
- Hard real-time multi-axis motion: electronic cam, flying shear, register control
- Fast high-resolution digital capture for mark / registration sensor signals
- CF card program storage, easy backup and restore
- Standard RECO rack footprint, direct drop-in replacement
- Native compatibility with legacy Indramat Sercos servo drives
Typical Applications
- Rotogravure / flexo printing press register control
- Slitting, winding & unwinding converting lines
- Packaging cross-cut and flying shear machines
- Textile warp knitting and spinning machinery
- Indramat Sercos servo system overhaul spare
FAQ Snippet
Q: What does Q1 and P2 mean in the part number? A: Q1 = Sercos master interface; P2 = Profibus-DP slave interface. That is the main difference between variants like .1N-T-Q1-NN-NN-FW.
Q: Can it replace .1N-T-Q1-NN-NN-FW? A: Hardware form factor is identical, but the Profibus port is added on P2 version. Verify the machine’s PLC bus requirement before swap.
Q: Does it include the CF card with program? A: Normally supplied as bare controller; application program is machine-specific and needs reloading.




