Reliance Electric 810.79.40C Armature Current Regulator Board for FlexPak 3000 Digital DC Drive, Ready Stock
Product Overview
The 810.79.40C is the armature current loop regulator sub-board inside Reliance FlexPak3000 DC drive power module. It works together with the main control board 915FK2101 (762.70.96). It samples armature CT current feedback, executes high-speed current closed-loop regulation, generates firing pulses for SCR thyristor bridge, implements current limiting and instantaneous overcurrent protection. The suffix C denotes PCB hardware revision C. It is widely used for paper machines, rolling mills, extruder heavy-duty regenerative / non-regenerative DC drives.
Technical Parameters
| Item | Specification |
|---|---|
| Part Number | 810.79.40C |
| Manufacturer | Reliance Electric (Baldor / Rockwell) |
| Series | FlexPak 3000 Digital DC Drive |
| Product Type | Armature Current Regulator Board |
| Core Function | Current loop control, SCR firing, IOC protection |
| Feedback | CT armature current signal sampling |
| Interface | Interlock & setpoint link to main control board 915FK2101 |
| Protection | Instantaneous overcurrent trip, SCR fault detection |
| Programming | No local parameter; tuning via main board + OIM / CS3000 software |
| Mounting | Installed inside FlexPak3000 power chassis |
| Operating Temperature | 0 °C ~ +50 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Country of Origin | Switzerland |
| Condition | Original genuine, available in stock |
Brand History & Introduction (FlexPak3000 Lineage)
FlexPak3000 is a classic digital DC drive platform from Reliance Electric. Its control system is split functionally:
- 915FK2101 (762.70.96): Main speed/field regulator CPU board (outer loop)
- 810.79.40C: Inner armature current regulator board (fast current loop + pulse firing)
The current board takes the current reference command from the main CPU and directly controls the thyristor rectifier. This split architecture achieves fast current response for high-inertia continuous process loads.
Rockwell/Baldor stopped production of FlexPak3000 hardware. A huge installed base in paper, steel and plastic lines still relies on this drive. 810.79.40C is a common outage spare, often paired together with 915FK2101.
Key Advantages
- High-speed inner current loop, fast response for DC armature regulation
- Built-in fast instantaneous overcurrent protection to protect SCR stack
- Revision C hardware, compatible with standard FlexPak3000 power modules
- Matched connector layout, direct drop-in replacement
- Stable firing control for regenerative four-quadrant DC drive
- Perfect match partner for 915FK2101 main regulator board
Typical Applications
- Paper machine main DC drive armature current control
- Cold rolling mill, wire drawing line FlexPak3000 drive
- Plastic calender, extruder heavy-duty DC drive cabinet
- FlexPak3000 spare parts package for overhaul
FAQ Snippet
Q: What is the relation between 810.79.40C and 915FK2101? A: 915FK2101 = speed & field outer loop main CPU; 810.79.40C = armature current inner loop firing board. Both are required for a complete control set.
Q: Can 810.79.40B replace 810.79.40C? A: Hardware pinout is generally compatible, but firmware/PCB component differences need verification before swap.
Q: Does this board include SCR power thyristors? A: No, it is only the control & firing board, separate from the power stack.




